Instruction/ maintenance manual of the product MGP-FAC1025-2 DeVillbiss Air Power Company
Go to page of 16
MODEL NO. F AC1025 DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 MGP-FAC1025-2 9/18/99 OWNERS MANUAL FOR PERMANENTL Y LUBRICA TED AIR COMPRESSOR (For Home Use Only) MODEL NO.
2 — ENG T ABLE OF CONTENTS SAFETY GUIDELINES - DEFINITIONS Information for preventing damage to equipment. This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS .
3 — ENG LIMITED W ARRANTY ONE YEAR FROM DA TE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company/ExCell Manufacturing is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user).
4 — ENG RISK OF BURSTING RISK OF ELECTRIC SHOCK RISK OF EXPLOSION OR FIRE Ai r T an k • T H E F OLL OW IN G CONDITION S COUL D lead to a we ak ening of the tank, and RES UL T I N A V IOLE N T T AN K EX PL OS IO N: 1. FAILURE TO PROPERL Y DRAIN condensed W A TER FROM THE T ANK , causing rust and thinning of the tank steel.
5 — ENG • The COMPRESSED AIR from your compressor IS NOT SAFE FOR BREA THING! The air stream may contain carbon monoxide or other toxic vapors, or particles from the tank or other components. • SPRA YED MA TERIALS such as paint, paint solvents, paint remover , insecticides, weed killers, etc.
6 — ENG GLOSSAR Y which the motor automatically re-starts is called "cut-in pressure." CUT-OUT PRESSURE: When you turn on your air com- pressor and it begins to run, air pressure in the air tank begins to build. It builds to approximately 125 PSI before the motor automatically shuts off .
7 — ENG DESCRIPTION OF OPERA TION Air Compressor Pump: To compress air, the piston moves up and down in the cylinder. On the downstroke, air is drawn in through the intake valves. The exhaust valves remain closed. On the upstroke of the piston, air is compressed.
8 — ENG Break-in Procedures INST ALLA TION AND BREAK-IN PROCEDURES GROUNDING INSTRUCTIONS Additional Regulators and Controls Since the air tank pressure is usually greater than that which is needed, a regulator is employed to control the air pressure ahead of any individual air driven device.
9 — ENG OPERA TING PROCEDURES 1. Before attaching air hose or accessories, make sure the OFF/AUTO lever is set to “OFF” and the air regulator or shut-off valve is closed. 2. Attach hose and accessories. When you are finished: 6. Set the “OFF/AUTO” lever to “OFF”.
10 — ENG Defective air tank. CORRECTION Excessive tank pressure - safety valve pops off. Pressure switch does not shut off mo- tor when compressor reaches “cut- out” pressure. Move the pressure switch lever to the “OFF” posi- tion. If the outfit doesn’t shut off, unplug.
11 — ENG TROUBLESHOOTING GUIDE (Continued) CORRECTION CAUSE Possible defect in safety valve. Knocking Noise Compressor is not supplying enough air to operate acces- sories. Prolonged excessive use of air. Decrease amount of air usage. Hole in hose. Remove and clean, or replace.
12 — ENG P AR TS LIST AIR HOSE REGULATOR SAFETY VALVE TANK PRESSURE GAUGE PRESSURE SWITCH AIR HOSE OUTLET PRESSURE GAUGE COMPRESSOR ASSEMBLY AIR TANK DRAIN VALVE (Not Shown) CHECK VALVE (Not Shown) ISOLATOR DESCRIPTION PART NUMBER AIR CHUCK ........
13 — ENG AIR COMPRESSOR DIAGRAM.
14 — ENG P ARTS LIST KEY NO. PART NUMBER DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 21 22 25 ----- CAC-1196 CAC-1212 CAC-1199 CAC-4323 SSG-8169 AC-0161 ----- ----- ----- N/A CAC-1342 CAC-1213 AC-0470 AC-0471 ----- ----- NOT ILLUSTRATED H-2099 Screw #10-24 x 7/8 LG.
15 — ENG NOTES.
PERMANENTL Y LUBRICA TED AIR COMPRESSOR MODEL NO. F AC1025 Attach Sales Receipt here. Retain Original Sales Receipt as Proof of Purchase for Warranty Repair Work. Call our T oll Free Number 1-800-888-2468, Ext 2 , then 1, to obtain the location of the nearest Authorized Service Center for ordering repair parts and for warranty repairs.
An important point after buying a device DeVillbiss Air Power Company MGP-FAC1025-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeVillbiss Air Power Company MGP-FAC1025-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeVillbiss Air Power Company MGP-FAC1025-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeVillbiss Air Power Company MGP-FAC1025-2 you will learn all the available features of the product, as well as information on its operation. The information that you get DeVillbiss Air Power Company MGP-FAC1025-2 will certainly help you make a decision on the purchase.
If you already are a holder of DeVillbiss Air Power Company MGP-FAC1025-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeVillbiss Air Power Company MGP-FAC1025-2.
However, one of the most important roles played by the user manual is to help in solving problems with DeVillbiss Air Power Company MGP-FAC1025-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeVillbiss Air Power Company MGP-FAC1025-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
