Instruction/ maintenance manual of the product VTD-24N-JHB Design Dynamics
Go to page of 16
For more information, visit www .desatech.com W ARNING: If the information in this manual is not .
www .desatech.com 1 14370-01E 2 SAFETy T ABLE OF CONTENTS Safety .................................................................. 2 Local Codes......................................................... 4 Unpacking.....................................
www .desatech.com 1 14370-01E 3 .
www .desatech.com 1 14370-01E 4 2. If you smell gas • shut off gas supply • do not try to light any appliance • do not touch any electrical switch; do not use any phone in your building • immediately call your gas supplier from a neighbor ’ s phone.
www .desatech.com 1 14370-01E 5 PRODUCT IDENTIFICA TION Figure 1 - Product Identication (Ramp Pan Burner) Log Set Assembly Grate Chassis INST ALLA TION .
www .desatech.com 1 14370-01E 6 Figure 3 - Attaching Damper Clamp Manufactured Fireplace Masonry Fireplace Damper Damper Clamp Damper Damper Clamp Damper VENTING SPECIFICA TIONS FOR INST ALLA TION The replace chimney ue and vent must be drafting properly .
www .desatech.com 1 14370-01E 7 INST ALLA TION Continued CONNECTING TO GAS SUPPL Y - .
www .desatech.com 1 14370-01E 8 INST ALLA TION Continued CHECKING GAS CONNECTIONS and connection.
www .desatech.com 1 14370-01E 9 INST ALLA TION Continued 4 . Place log set assembly in center of fireplace floor . Make sure front faces forward. 5. Install gas connector tube into gas supply tting. Carefully shape tube to attach to adapter tting being careful not to kink tube.
www .desatech.com 1 14370-01E 10 OPERA TION 3. W ait ve (5) minutes to clear out any gas. If you then smell gas, STOP! Follow "A" in the safety information, column 1. If you don't smell gas, go on the next step. 4. Light a match an d la y i t o n to p o f pa n material about 2" from end of supply side of pan.
www .desatech.com 1 14370-01E 1 1 TROUBLESHOO TING .
www .desatech.com 1 14370-01E 12 OBSERVED PROBLEM Log set produces a clicking/ ticking noise just after burners are lit or shut off Log set produces unwanted odors Gas odor even when control knob is in OFF position Gas odor during combustion REMEDY 1.
www .desatech.com 1 14370-01E 13 SERVICE HINTS When Gas Pressure is T oo Low • pilot will not stay lit • burners will have delayed ignition • heater will not produce specied heat Y ou may feel your gas pressure is too low . If so, contact your local natural gas supplier .
www .desatech.com 1 14370-01E 14 P ARTS .
www .desatech.com 1 14370-01E 15 P ARTS This list contains replaceable parts used in your heater. When ordering parts, follow the instructions listed under Replacement Parts on page 13 of this manual.
1 14370-01 Rev . E 05/08 114370 01 NOT A UPC DESA Heating, LLC 2701 Industrial Drive Bowling Green, KY 42101 www .desatech.com 1-866-672-6040 WARRANTy kEEP THIS WARRANTy DESA HEA TING, LLC LIMITED WAR.
An important point after buying a device Design Dynamics VTD-24N-JHB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Design Dynamics VTD-24N-JHB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Design Dynamics VTD-24N-JHB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Design Dynamics VTD-24N-JHB you will learn all the available features of the product, as well as information on its operation. The information that you get Design Dynamics VTD-24N-JHB will certainly help you make a decision on the purchase.
If you already are a holder of Design Dynamics VTD-24N-JHB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Design Dynamics VTD-24N-JHB.
However, one of the most important roles played by the user manual is to help in solving problems with Design Dynamics VTD-24N-JHB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Design Dynamics VTD-24N-JHB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
