Instruction/ maintenance manual of the product AT-DIS7_PROHD 3M
Go to page of 5
34-8700-5191-8 1 Revision 10/03/07 3M™ Overhaul Service Kit The part number 20347, 3M™ Overhaul Service Kit, contains all the replacement parts that naturally wear over time and a straightforward manual to make servicing a 3M™ sander simple.
34-8700-5191-8 2 Revision 10/03/07 DISASSEMBL Y INSTRUCTIONS Changing Grips: 1. The Grip has two “tabs” that wrap around the body of the sander under the inlet and exhaust. Use a small screwdriver to pick out one of the “tabs” of the Grip, and then continue to go underneath the Grip with the screwdriver and pry the Grip off of sander .
34-8700-5191-8 3 Revision 10/03/07 B) Remove the Ø 1 in. (28 mm) Hose SGV Swivel Exhaust Assembly from the Housing and SGV Skirt Adapter or SGV Shroud Adapter . C) Pull the SGV Retainer out of the bore of the Swivel Exhaust Assembly and remove the two O-rings.
34-8700-5191-8 4 Revision 10/03/07 into the mounting hole of the Swivel Exhaust Assembly and Housing until the end of the screw is ush with the inside surface of the Housing. Place the Nut into the cavity of the Housing and thread the Screw into the Nut until tight.
34-8700-5191-8 5 Revision 10/03/07 Symptom Possible Cause Solution Low Power and/or Low Free Speed Insufcient Air Pressure Check air line pressure at the Inlet of the Sander while the tool is running at free speed. It must be 90 psig (6.2 Bar). Clogged Mufer(s) See the “Housing Disassembly” section for Mufer removal.
An important point after buying a device 3M AT-DIS7_PROHD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M AT-DIS7_PROHD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M AT-DIS7_PROHD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M AT-DIS7_PROHD you will learn all the available features of the product, as well as information on its operation. The information that you get 3M AT-DIS7_PROHD will certainly help you make a decision on the purchase.
If you already are a holder of 3M AT-DIS7_PROHD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M AT-DIS7_PROHD.
However, one of the most important roles played by the user manual is to help in solving problems with 3M AT-DIS7_PROHD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M AT-DIS7_PROHD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
