Instruction/ maintenance manual of the product AMPS230 Airlink101
Go to page of 13
Quick Installation Guide USB2.0 1-Port Multi-Functional Printer Server Model # AMPS230 This Quick Installation Guide onl y provides basic in structions. For detailed information on using this product, plea se refer to the User’s Manual on the supplied CD.
Step 4 Turn on the printer. Once the prin ter is powered on, conne ct the print server’s power adapter to an ele ctrical outlet. Installing the PS Software Note: The PS Software must be in stalle d on all computers you plan to use with the print server.
Note: If the autorun windo w does not appear automatically, go to Start -> Run and type D:UtilitySetup.exe (where D is the letter of your CD-ROM drive) and click OK . Step 2 Select your setup language and click OK. Step 3 Click Nex t at the welcome screen.
Step 4 Click Nex t at the Choose Destination Location screen. Step 5 Click Nex t at the Select Program Folder ..
Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish . Configuring the Printer Server Note: The following step s o nly need to be performed one time from one computer. Step 1 Click the Discov er button and your printer should show up unde r Server Name .
Step 2 Once the printer server ap pears in the Server Name box, click on it. You should see your printer next to Device name . Click on the Setup Wizard button to configure the printer se rver. Step 3 A password box will appear. The default password i s admin .
Step 4 Click Nex t at the welcome screen. Step 5 At the System screen you ca n change the Server Name , Port Name , and Password . Click Next after makin g the desired changes. If you do not have a specific Server Name, Port Name , or Password that you wou ld like to use, click Next to accept t he default settings.
Step 6 If you have a specific IP address you would like to assi gn to the print server, sel e ct Manually Assign and enter your custom settings. Otherwise, select DHCP Assign Auto matically and click Next . Step 7 If your network uses a workgroup name other than WORK GROUP, you can enter it here, or accept the default settings, and click Nex t .
Step 8 If you have specific AppleTalk settings, you ca n enter them here or accept the default settings, and click Ne xt . Step 9 Click Save to save the changes to your print server.
Adding the Printer to the Computer Note: The following step s must be completed on all computers you plan to use with the print server. Step 1 Double click on the PS-Link icon in t he system tray to open the PS-Lin k software. Step 2 Click the Discov er button and your printer should show up unde r Server Name .
Step 3 Select your print server from the Server Name box and click the Link button. Step 4 Click OK at the Lin k Successfully screen. You will see no tices appearing in the bottom right-hand co rn er of your screen while Windows configures the printer.
Step 6 In Printers and Faxes (or Printers ) you will see a copy of your printer. Right click on the copy and click Set as Def ault Print er . Congratulations, the config uration i s now complete. Remember to repeat all steps in Section 4 on ea ch of the computers you plan to use with the print server.
Technical Support E-mail: support@ airlink101.c om Toll Free: 1-888-746-3238 Website: www.airlink101.com *Printer server may not support all printers. Go to the AirLink101 website to view the printer compatibility list *Actual data throughput will vary.
An important point after buying a device Airlink101 AMPS230 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AMPS230 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AMPS230 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AMPS230 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AMPS230 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AMPS230, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AMPS230.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AMPS230. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AMPS230 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
