Instruction/ maintenance manual of the product UG-ASW232-1103 Airlink
Go to page of 24
AirLink+ 1 32-Port 10/100Mbps Ethernet Switch User Guide 32-Port 10/100Mbps Ethernet Switch User Guide UG-ASW232-1 103.
32-Port 10/100Mbps Ethernet Switch User Guide 2 AirLink+ FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules.
AirLink+ 3 32-Port 10/100Mbps Ethernet Switch User Guide requir ed for safe operation of the equipment is not compromised. • Mechanical Loading ⎯ Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
32-Port 10/100Mbps Ethernet Switch User Guide 4 AirLink+.
AirLink+ 5 32-Port 10/100Mbps Ethernet Switch User Guide T able of Contents About this Guide .............................................. 7 Purpose ...................................................................... 7 T erms & Usage .........
32-Port 10/100Mbps Ethernet Switch User Guide 6 AirLink+ Connecting the Switch ................................... 1 8 Connecting a PC to the Switch ............................. 18 Connecting a Hub or Switch to the Switch ......... 19 Port Speed & Duplex Mode .
AirLink+ 7 32-Port 10/100Mbps Ethernet Switch User Guide About This Guide Congratulations on your purchase of the 32-port 10/100Mbps Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package.
32-Port 10/100Mbps Ethernet Switch User Guide 8 AirLink+ Introduction This chapter describes the features of the Switch and some background information about Ethernet and Fast Ethernet switching technology .
AirLink+ 9 32-Port 10/100Mbps Ethernet Switch User Guide switch bridge Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a LAN.
32-Port 10/100Mbps Ethernet Switch User Guide 10 AirLink+ Features The Switch was designed for easy installation and high performance in an environment where traf fic on the network and the number of user increase continuously . The Switch, with its rack size, is specifically designed for middle- to large-sized workgr oups.
AirLink+ 11 32-Port 10/100Mbps Ethernet Switch User Guide The Switch is an unmanaged 10/100Mbps Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features ar e: • Auto MDI/MDIX feature automatically detects and corrects for crossover cables and allows dir ect switch- to-switch connection.
32-Port 10/100Mbps Ethernet Switch User Guide 12 AirLink+ Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: • One t.
AirLink+ 13 32-Port 10/100Mbps Ethernet Switch User Guide When installing the Switch on a level surface, attach the rubber feet to the bottom of each device. The rubber feet cushion the hub and protect the hub case from scratching. 100 Base-FX Module Installation The installation procedure for each module is the same.
32-Port 10/100Mbps Ethernet Switch User Guide 14 AirLink+ Then, use screws pr ovided with the equipment rack to mount each switch in the rack (see Figure 2).
AirLink+ 15 32-Port 10/100Mbps Ethernet Switch User Guide Connecting Network Cable The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex mode.
32-Port 10/100Mbps Ethernet Switch User Guide 16 AirLink+ Powe r 100 Base-FX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 10 M LINK/ACT 100 M LINK/ACT 10/100 M FDX 10/100 M COL 17 18 19 20 21 22 23 24 25 26.
AirLink+ 17 32-Port 10/100Mbps Ethernet Switch User Guide Module Slots The module slots are used to install module options for 100 BASE-FX connection. AC Power Connector Plug the power cord into the AC power connector .
32-Port 10/100Mbps Ethernet Switch User Guide 18 AirLink+ LED Indicators The LED indicator panel contains the following indicators: • Power (PWR) Power (PWR) Power (PWR) Power (PWR) Power (PWR) ⎯ This indicator lights green when the switch is receiving power .
AirLink+ 19 32-Port 10/100Mbps Ethernet Switch User Guide The LED indicators for the PC connection depend on the LAN card capabilities. If LED indicators are not lit after making a proper connection, check the PC LAN card, the cable, the Switch conditions, and connections.
32-Port 10/100Mbps Ethernet Switch User Guide 20 AirLink+ IEEE 802.3 10 Base-T ethernet IEEE 802.3a 100 Base-TX fast ethernet ANSI/IEEE 802.3 auto-negotiation IEEE 802.
AirLink+ 21 32-Port 10/100Mbps Ethernet Switch User Guide 100 to 240 V AC, 50- or 60-Hz internal universal po wer supply Specification Feature 40 watts (maximum) Operating: 0˚ to 50˚ C Storage: − .
32-Port 10/100Mbps Ethernet Switch User Guide 22 AirLink+ Store-and-forw ard Specification Feature 1,024 Kbytes per de vice 4K entries per device 10Mbps ethernet: 14,880/pps 100Mbps fast ethernet: 148,800/pps Automatic update T ransmission method RAM buff er Filtering address table P ack et filtering/ forw arding rate MAC address learning T able 3.
AirLink+ 23 32-Port 10/100Mbps Ethernet Switch User Guide.
32-Port 10/100Mbps Ethernet Switch User Guide 24 AirLink+ Copyright © 2003 AirLink+. All rights r eserved. AirLink+, the stylized AirLink+ logo, specific product designations, and all other words and logos that ar e identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink+.
An important point after buying a device Airlink UG-ASW232-1103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink UG-ASW232-1103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink UG-ASW232-1103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink UG-ASW232-1103 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink UG-ASW232-1103 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink UG-ASW232-1103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink UG-ASW232-1103.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink UG-ASW232-1103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink UG-ASW232-1103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
