Instruction/ maintenance manual of the product CPVSR18 Desa
Go to page of 24
NA TURAL GAS LOG WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
2 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS 1. This appliance, as supplied, is only for use with the type of gas indicated on the rating plate.
3 901048 OWNER’S MANUAL PRODUCT IDENTIFICA TION Figure 1 - Product Identification (VVDR24 Shown) OPTIONAL PRODUCT FEA TURES ON/OFF SAFETY VALVE/ PILOT KIT AND PROPANE/LP CONVERSION An optional valve/safety pilot kit with a piezo ignitor is available for this appliance.
4 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS PROVIDING ADEQUATE VENTILATION The following are excerpts from National Fuel Gas Code. NFPA 54/ANS Z223.1, Sec- tion 5.3, Air for Combustion and Ventila- tion . All spaces in homes fall into one of the three following ventilation classifications: 1.
5 901048 OWNER’S MANUAL DETERMINING FRESH-AIR FLOW FOR APPLIANCE LOCATION Determining if You Have a Confined or Unconfined Space Use this work sheet to determine if you have a confined or unconfined space.
6 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS AIR FOR COMBUSTION AND VENTILA TION Continued Figure 3 - Ventilation Air from Outdoors Figure 2 - Ventilation Air from Inside Building Outlet Air Ve.
7 901048 OWNER’S MANUAL INST ALLA TION WARNING: Before installing in a solid fuel burning fireplace, the chimney flue and firebox must be cleaned of soot, creosote, ashes and loose paint by a quali- fied chimney cleaner. Creosote will ignite if highly heated.
8 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS INSTALLING DAMPER CLAMP Secure the damper stop clamp provided to the leading edge of the damper as shown in Figure 5. If for any reason this clamp doesn't work on your fireplace, another suitable clamp or permanent stop must be installed, or the damper blade must be cut or removed.
9 901048 OWNER’S MANUAL INST ALLA TION Continued Figure 7 - Checking Gas Joints HEARTH KIT ASSEMBLY AND INSTALLATION Kit Assembly Note: The following instructions apply to both standard single bar burners, as well as dual flame “U” style burners.
10 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS 2. Attach the pilot gas line to the pilot out- let of the gas control v alve and tighten. Connect the thermocouple to the rear of the gas control valv e. See Figure 12. Do not overtighten. If using propane/LP g as, see Changing Pilot Orif ice, page 11.
11 901048 OWNER’S MANUAL TESTING BURNER FOR LEAKS 1. Generously apply soapy solution to all connections. WARNING: Never check for gas leaks with open flame. 2. Light the b urner with the shut-off v alve no more than half open and holding a match slightly in front of the pan (see Lighting Instructions, page 12).
12 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS LIGHTING INSTRUCTIONS OPERA TING APPLIANCE FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result caus- ing property damage, personal injury or loss of life.
13 901048 OWNER’S MANUAL TROUBLESHOOTING WARNING: Turn off log set and let cool before servicing. Only a qualified service person should service and repair log set. CAUTION: Never use a wire, needle, or similar object to clean ODS/pilot. This can damage ODS/ pilot unit.
14 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS WARNING: If you smell gas • Shut off gas supply. • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone.
15 901048 OWNER’S MANUAL OBSERVED PROBLEM When ignitor button is pressed, there is no spark at pilot (GA9000 Only) When ignitor button is pressed, there is spark at pilot but no ignition (GA9000 Onl.
16 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS ILLUSTRA TED PA R T S BREAKDOWN RADCO BURNER MODELS CVSR18, CVSR24, CPVSR18, AND CPVSR24 3 1 8 6 4 2 10 11 12 13 14 15 16 23 17 22 21 20 19 18 7 5 .
17 901048 OWNER’S MANUAL P ARTS LIST This list contains replaceable parts used in your log set. When ordering parts, follow the instructions listed under Replacement Parts on page 20 of this manual. RADCO BURNER MODELS CVSR18, CVSR24, CPVSR18, AND CPVSR24 KEY PART NUMBER FOR NO.
18 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS ILLUSTRA TED PA R T S BREAKDOWN RADCO BURNER MODELS CVDR18, CVDR24, AND CVDR30 3 13 1 8 6 4 2 10 7 5 9 9 14 14 20 19 18 15 16 21 17 11 12 Berkshire.
19 901048 OWNER’S MANUAL P ARTS LIST This list contains replaceable parts used in your log set. When ordering parts, follow the instructions listed under Replacement Parts on page 20 of this manual. RADCO BURNER MODELS CVDR18, CVDR24, AND CVDR30 KEY PART NUMBER FOR NO.
20 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS ACCESSORIES Purchase these fireplace accessories from your local dealer. If they can not supply these accessories, call DESA International’s Sales Department at 1-800-432-2382 for information. You can also write to the ad- dress listed on the back page of this manual.
21 901048 OWNER’S MANUAL ACCESSORIES Continued DECORATIVE ASH BED CONTROL COVER - CDABK (Not Shown) An attractive way to cover control knob and piezo ignitor. 18" ORNAMENTAL GRATE ENHANCER - GA9350 (Not Shown) For 18" models only. Additional decoration for front grate.
22 901048 FOR VENTED NA TURAL GAS LOGS RADCO BURNERS NOTES _______________________________________________________________________________________________ _____________________________________________.
23 901048 OWNER’S MANUAL NOTES _______________________________________________________________________________________________ _______________________________________________________________________.
LIMITED WARRANTY VANGUARD VENTED GAS LOGS DESA International warrants this product to be free from defects on burner system for three (3 ) years and logs for a lifetime f rom the date of first purchase, provided that the product has been properly installed, operated and maintained in accordance with all applicable instructions.
An important point after buying a device Desa CPVSR18 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Desa CPVSR18 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Desa CPVSR18 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Desa CPVSR18 you will learn all the available features of the product, as well as information on its operation. The information that you get Desa CPVSR18 will certainly help you make a decision on the purchase.
If you already are a holder of Desa CPVSR18, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Desa CPVSR18.
However, one of the most important roles played by the user manual is to help in solving problems with Desa CPVSR18. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Desa CPVSR18 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
