Instruction/ maintenance manual of the product ASW-2402 Airlink
Go to page of 20
AirLink+ 1 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 26-Port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 2 × 1000BASE plus 24 × 10/100BASE ports User Guide ASW-2402.
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 2 AirLink+ FCC W arning This equipment has been tested and found to comply with the regu- lations for a Cla ss A digital device, pursua nt to Part 15 of the FCC Rules.
AirLink+ 3 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch UL W arning a) Elevated Operating Ambient T emperature- If installed in a closed or multi-unit rack assembly , the operating ambient temperature of the rack environment may be greater than room ambient.
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 4 AirLink+.
AirLink+ 5 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch T ABLE OF C ONTENTS ABOUT THIS GUIDE ............................................................. 1 P URPOSE .......................................................................
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 6 AirLink+ About This Guide Congratulations on your purchase of the 26-Port 10/100/1000Mbps Gigabit & Ethernet Switch with 2 x 1000BASE-T plus 24 x 10/ 100BASE-TX ports.
AirLink+ 7 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Introduction This chapter describes the features of the Switch and some back- ground information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology .
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 8 AirLink+ Giga bit Ethernet T echnology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format,.
AirLink+ 9 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Switching T echnology Another approach to pushing beyond the limits of Ethernet technol- ogy is the development of switching technology .
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 1 0 AirLink+ Features 24×10/100BASE-TX Fast Ethernet ports + 2×1000BASE-T Gigabit Ethernet ports Auto MDI-X for each port Full/.
AirLink+ 1 1 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Unpacking and Installation This chapter provides unpacking and installation information for the Switch. T o avoid causing a ny damage to the Switch, we recommend that you read this chapter carefully before starting installation.
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 1 2 AirLink+ Installation The site where you place the Switch may greatly affect its perfor- mance. When installing, take the following into your consideration: Install the Switch in a fairly cool and dry place.
AirLink+ 1 3 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Figure 1. Attach the a dhesive rubber pads to the bottom Rack Mounting The Switch can be mounted in an EIA standard-size, 19-inch rack, which ca n be placed in a wiring closet with other equi pments.
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 1 4 AirLink+ Figure 3. Mount the Switch in the rack Connecting Network Cable The Switch supports 10/100/1000Mbps Gigabit Ethernet. It runs full/half duplex transfer mode for 10/100Mbps and full duplex trans- fer mode for 1000Mbps.
AirLink+ 1 5 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Identifying External Components This chapter identifies all the major external components of the Switch. Both the front a nd rear pa nels are shown below , with a descri ption of each panel features.
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 1 6 AirLink+ Rear Panel Figure 5. The rear pa nel of the Switch C Power Connector This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet.
AirLink+ 1 7 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Understanding LED Indicators The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. Power LED POWER On : When the Power LED lights on, the Switch is receiving power .
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 1 8 AirLink+ 100Mbps On : When the LED lights on, the respective port is connected to a 100Mbps Ethernet network.
AirLink+ 1 9 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch T echnical Spe cifications Technical Support E-mail: support@airlinkplus.com T oll Free: 1-888-746-3238 W eb Site: www .
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch 2 0 AirLink+ Copyright 2004 AirLink+. All rights reserved. AirLink+, the stylized AirLink+ logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink+.
An important point after buying a device Airlink ASW-2402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink ASW-2402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink ASW-2402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink ASW-2402 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink ASW-2402 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink ASW-2402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink ASW-2402.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink ASW-2402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink ASW-2402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
