Instruction/ maintenance manual of the product 9900 Series 3M
Go to page of 13
1 User ’ s Guide 3M ™ A nti- Fati gue Mat s 9 9 0 0 S eries.
2 T able of Contents Section Page Safety Information ................................................................................................ 3 1.0 Installation of 3M ™ Anti-F atigue Mats 9900 and 9920 ................................... 5 2.
3 SAFETY INFORMA TION Read , understand , and follo w all safety information contained in these instructions prior to installation and use of the 3M ™ Anti-F atigue Mats 9900 Series.
4 T o reduce the risk associated with hazardous voltage due to 3M ™ Anti-F atigue Mats 9900 Series being used in areas requiring insulating type matting: • Anti-Fatigue Mats are electrically conductive – do not use these mats in areas with possible exposure to high voltage.
5 1.0 Installation of 3M ™ Anti-Fatigue Mats 9900 and 9920 1. Pre-clean the floor area where the mat is to be installed. 2. Place mat into desired location.
6 2.0 Installation and Assembly of 3M ™ Anti-Fatigue Mat Runner 9910 1. Pre-clean the floor area where the mat runner is to be installed. 2. Before assembling the runner, la y out each mat section in the appropriate sequence. Sequence numbers can be found on the back of each section along the molded rubber edge.
7 4. Kneel or squat on the first section of the 3M ™ Anti-F atigue Mat Runner 9910 Series with the connector tabs in front of you and pull the ne xt runner section tow ards y ou until its edges aligns with the edge of the first runner section. (Figure 5) 5.
8 3.0 Optional Per manent Bonding of Runner Sections with Adhesive Note: P ermanent adhering of the runner sections together with an adhesive may cr eate a continuous runner that is very heavy and difficult to move or r eposition.
9 4. As necessar y , apply localized pressure to close the adhered seam of the 3M ™ Anti-F atigue Mat Runner 9910 Series. It ma y be necessary to hold pressure for 10-15 seconds until the adhesi ve bonds the tw o pieces. (Figures 6 & 7) 5. The bev eled edges of the seam are adhered separately .
10 4.0 Cleaning Guidelines Note: 3M™ Anti-F atigue Mats 9900 Series are constructed of dur able SBR rubber that can be easil y cleaned with the r ecommended cleaner and techniques belo w . Clean mats as needed. The follo wing r ecommendations are pr ovided to pr olong the life of your mat pr oduct: 1.
11 • F or small mat areas apply the cleaner with a trigger spra y bottle. Scr ub and remo ve excess liquid from the mat surface with a dampened sponge or lint- free cloth. • F or larger mat areas appl y the cleaner with a mop and bucket. T o reduce film build-up change out the cleaning solution frequently .
12 6.0 3M ™ Anti-Fatigue Mats 9910 Series Specifications Property T ypical Value Size Standard: 3 ft. x 5 ft. (0.9 m x 1.5 m) , 2 ft. x 3 ft. (0.6 m x 0.9 m) and Octagonal 22 in. (55.9 cm) diameter Runners: 3 ft. width x custom length Thickness 0.600 inches (1.
3 Electronics Materials Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 T oll-Free: 866-722-3736 International: 919-718-0000 Email: 3mstaticinfo@mmm.com www .3Mstatic.com Please recyc le. Printed in USA. © 3M 2014.
An important point after buying a device 3M 9900 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 9900 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 9900 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 9900 Series you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 9900 Series will certainly help you make a decision on the purchase.
If you already are a holder of 3M 9900 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 9900 Series.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 9900 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 9900 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
