Instruction/ maintenance manual of the product AVR-2309 Denon
Go to page of 81
AV SURROUND RECEIVER AVR-2309 Owner ’ s Manual Bedienungsanleitung Manuel de l’Utilisat eur Italiano Español Neder lands S vensk a Book 2 v English Deutsch F r ançais PRESET CODE Book 1.
I IT ALIANO ESP AÑOL NEDERLANDS S VENSKA DEUTSCH FRANCAIS ENGLISH CA UTION: T o completely disconnect this product from the mains, disconnect the plug from the wall soc ket outlet. The mains plug is used to completely inter rupt the pow er supply to the unit and must be within easy access by the user .
II DEUTSCH FRANCAIS IT ALIANO ESP AÑOL NEDERLANDS S VENSKA ENGLISH CA UTION: • The ventilation should not be impeded by covering the v entilation openings with items, suc h as newspapers, tablecloths, curtains, etc. • No naked flame sources, suc h as lighted candles, should be placed on the unit.
A NO TE ABOUT RECY CLING: This product’ s pac kaging materials are recy clable and can be reused. Please dispose of an y materials in accordance with the local recycling regulations.
Accessories ····················································································· 3 Cautions on Han.
Operating DENON Audio Components ······································ 56 Presetting ······································.
• Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
For buttons not explained here, see the page indicated in parentheses ( ). q w e r t y u i o Q0 Q1 Q2 Q3 Q4 Q5 W4 W5 W6 W7 W8 W9 E0 E1 E2 E3 Q8 Q7 Q6 Q9 W0 W1 W2 W3 q Power operation button (ON/STANDB.
u y i Q4 Q5 o Q0 Q1 Q2 Q3 w q e r t q Input signal indicators w Input signal channel indicators These light when digital signals are input. e Information display The input source name, surround mode, setting values and other information are displayed here.
q w e r t y o u i Q0 Q4 Q5 Q7 Q0 Q2 Q3 Q1 Q6 q RS-232C connector ·································································· (1.
Remote Control Unit Q1 q w e r t y i Q0 o u Q2 Q3 Q4 Q5 Q6 q Indicator ······················································ (56) w Power buttons.
Audio cables Video cables Coaxial digital connections (Orange) Coaxial digital (75 Ω/ohms pin-plug) cable Optical digital connections Optical cable Analog connections (stereo) (White) (Red) R L R L S.
• This function automatically converts various formats of video signals input to the AVR-2309 into the format used to output the video signals from the AVR-2309 to a monitor.
w q w q (R) (L) w q w q w q (L) (R) */ w q w q (L) (R) Speaker Connections Example: 5.1 / 7 .1 -channels Front speakers A Center speaker Subwoofer Subwoofer with built-in amplifier Surround speakers b L : Left R : Right NO TE For surround back speakers : • When using just one surround back speaker, connect it to the left channel (SBL).
With HDMI connections, the video and audio signals can be transferred with a single cable. 065 )%.* */ )%.* Compatible audio format Details Discs (examples) 2-c hannel linear PCM 2c h 32-192 kHz 1 6/2.
• Select the terminal to use and connect the device ( v page 9 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable.
R L R L "6%*0 "6%*0 $0"9*"- 065 3 - 065 CD Player CD player When using an optical cable for the digital audio connection, make the settings at menu “Input Setup” – “Assign” – “Digital In” ( v page 35).
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connecting the Recording Components R L R L R L R L 015*$"- 47*%&0 4.
R L R L R L R L R L R L 46# 800'&3 $&/5&3 463306/% #"$, 3 - 463306/% 3 - '30/5 3 - "6%*0 Component with Multi-channel Output connectors Blu-ra y Disc player / D VD play er / External decoder • To play the analog input signals input to the EXT.
Multi-zone ZONE2 out Connections If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to play a different program source in ZONE2 at the same time ( v page 60 ~ 62).
Menu Operations [SOURCE CONTROL 1] ENTER, op RETURN ui <MENU> With the AVR-2309, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. uiop [A. MENU] ENTER RETURN [Front] [Rear] 1 Press <MENU> or [A.
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting Examples of On-screen Display and Front Display MENU 1.Auto Setup 2.Manual Setup 3.Input Setup 4.Parameter 5.Information G On-screen display H G Front display H *MENU Auto Setup *Start Menu Start• 1-1.
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting Menu Map MENU 1.Auto Setup 2.Manual Setup 3.
0 Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH A uto Setup MASTER VOLUME ENTER, o p MASTER VOLUME ui RETURN uio p ENTER RETURN [Front.
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH About the Auto Setup The Audyssey MultEQ auto setup function detects the presence of each speaker and automatically calculates the speaker size, channel level, distance, and optimal crossover frequency setting.
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH Step 2 : Measurement q Press u to select “Ne xt 0 ”, then press o . • The measurement of the 2nd position starts. w Move the microphone to the 3rd position and press o .
NO TE Do not turn the power off while the settings are being stored. Step 5 : Store The auto setup measurement results are stored in the AVR-2309. q Press u to select “Store 0 ”, then press o . • “Storing Please wait ... ” is displayed on the on-screen display while the results are being stored.
Make detail settings for various parameters. Manual S etup SOURCE SELECT op SOURCE SELECT <DIMMER> <SPEAKERS> <MENU> op [TEST] [A. MENU] SOURCE SELECT [Front] [Rear] Button located o.
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH s Subwoofer Setup Select low range signal to be reproduced by subwoofer. • This can be set when menu “Speaker Configuration” – “Subwoofer” is set to “Yes”.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH h Front Speaker Setup Select front speakers to use for each surround mode.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). [Selectable items] ON OFF • This can be set when “HDMI Control“ is set to “ON“. • Please consult the operating instructions for each connected device to check the settings.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). d Dolby Digital Setup Set dynamic range for downmix playback of Dolby Digital sources. • Set this to “ON” if the sound from the front speakers seems distorted.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). ZONE2 Setup Make settings for audio playback in a ZONE2 system.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). s Volume Control Set the MAIN ZONE volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” ( v page 1 7). g Quick Select Name Change the Quick Select name. Up to 16 characters can be input. [Input characters] A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - .
n TUNER (AM/FM) This menu is for “TUNER”. F Menu screen F 2.Preset Skip 3.Preset Name 4.Video 5.Input Mode 6.Rename 7.Source Level 1.Auto Preset [FM/AM TU] 3.Input Setup TUNER n PHONO This menu is for “PHONO”. F Menu screen F 2.Input Mode 1.Video 3.
a Auto Preset Use the auto preset function to program radio stations. [Input source] TUNER [Selectable items] Start : Start the auto preset process. If an FM station cannot be preset automatically, select the desired station by tuning it in manually, then preset it manually.
Pr ogr essive Mode Select optimum progressive mode f or video material. [Input source] DVD HDP TV/CBL VCR V .AUX [Selectable items] Auto : Automatically detect video material type. Video1 : Select mode suitable for video playbac k. Video2 : Select mode suit able f or video and 30-frame film material playbac k.
h Rename Change the display name for this source. Names containing up to 8 characters can be input. [Characters that can be input] A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - .
Getting Star ted Connections Setup Playbac k Remote Control Multi-zone Infor mation T roubleshooting ENGLISH Shuffl e Make settings for shuffl e mode. n When DENON control dock for iPod ASD-1R is connected [Selectable items] Songs : Shuffl e all songs.
Depending on the program source being played, it may not be possible to achieve a satisfactory surround effect. In this case, try other modes to achieve a sound field suited to your tastes. w DSP Simulation Playback The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes .
P arameter [AUDIO DELA Y] [NIGHT] MUL TEQ RESTORER DYNAMIC VOLUME [SOURCE CONTROL 1] uiop ENTER ENTER, op RETURN DYNAMIC VOLUME ui MUL TEQ <MENU> RESTORER uiop [STD] RETURN [MUSIC] [CINEMA] [A.
Surround Parameter Adjust surround sound parameters. The parameters (items) which can be adjusted differ depending upon the following conditions. • Whether an input signal is present (when playing) or not (when stopped, etc.
j P anorama Assign front L/R signal also to surround c hannels, for wider sound. If the surround ef fect seems w eak, set “P anorama” to “ ON” . [Selectable items] ON OFF k Dimension Shif t sound image center to front or rear , to adjust playbac k balance.
A7 Default Resets the settings to the default values. A4 SB CH Out (f or 2-channel sources) Determine whether to use surround bac k speakers. [Selectable items] ON : The surround bac k c hannel signal is played. OFF : The surround bac k c hannel signal is not played.
S2 Dynamic EQ Audy ssey Dynamic EQ solv es the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audysse y Dynamic EQ works in t andem with Audy ssey MultEQ to provide well-balanced sound for every listener at any v olume level.
RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound.
F Menu screen F 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.Preset Station 1.Status 5.Information Inf ormation Status Shows information about current settings. a MAIN ZONE Shows information about settings for MAIN ZONE.
F Menu screen F 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.Preset Station 1.Status 5.Information F Menu screen F 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.Preset Station 1.Status 5.
Preparations 1 Press <POWER> . The power indicator lights red and the power is set to the standby mode. 2 Press <ON/STANDBY> or [ON/SOURCE] . The power indicator fl ashes green and the power turns on. b Also press SOURCE SELECT when in standby mode, the power turns on.
1 Either turn <SOURCE SELECT> or press [TUNER] to select “TUNER”. 2 Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCE CONTROL 2] to “TUNER”. ( v page 56 “Remote Control Unit Operations”) 3 Press BAND to select “FM” or “AM”.
T raf fi c Pr ogram (TP) TP identifi es programs that carr y traf fi c announcements. This allows you to easily fi nd out the latest traffi c conditions in your area before lea ving home. Radio T ext (RT) RT allows RDS stations to send text messages that appear on the display .
1 Either tur n <SOURCE SELECT> or pr ess [TUNER] to select “TUNER”. 2 Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCE CONTROL 2] to “TUNER”. ( v page 56 “Remote Control Unit Operations”) 3 Press <RDS> to select “R T”.
• With the default settings, the iPod can be used connected to the VCR (iPod) connector. • Use the RESTORER mode to expand the low and high frequency components of compressed audio fi les and achieve a richer sound. The default setting is “Mode3” ( v page 43).
Listening to Music 1 Use ui to select the menu, then press ENTER or p to select the music fi le to be played. 2 Press ENTER or p . Playback starts. n Stopping playback temporarily During playback, press ENTER or [ 1 ] . Press again to resume playback.
• To cancel, press <ZONE2/REC SELECT> , then turn <SOURCE SELECT> until “ZONE2 SOUR CE” is displayed. • Make a test recording before starting the actual recording. • Sources selected with the REC OUT mode are output from ZONE2 as well.
Con v enient Functions HDMI Contr ol F unction When A VR-2309 is connected to a TV and player compatible with HDMI control function, you can perf orm the following operations. Settings other than AVR-2309 settings must be made on the respective devices.
<SPEAKERS> <INPUT MODE> <SELECT/ENTER>, op ui QUICK SELECT <POWER> [CH SELECT/ ENTER] uiop QUICK SELECT uiop ENTER [Front] [Rear] But ton located on both the main unit and the .
Last Function Memory This stores the settings as they were directly before the standby mode was set. When the power is turned back on, the settings are restored to as they were directly before the standby mode was set.
1 Set [SOURCE CONTROL 1] to “AUDIO”. 2 Set [SOURCE CONTROL 2] to the position for the component to be operated (CD, iPod/NETWORK or TUNER). 3 Operate the audio component. b For details, refer to the component’s operating instructions.
Functions of Buttons by Component [OFF] [SOURCE CONTROL 1] [ 1 ], [ 2 ], [SHIFT], [ 3 ], [ 0 ], [SKIP + / FA VORITE], [TUNING], [ 6 7 ], [ 8 9 ], [CH +/–] [ON/SOURCE] [SOURCE CONTROL 2] [SETUP], [ u.
n Rear [TUNING +/–], [TV VOL +/–], [MODE / TOP MENU], [BAND / PICTURE ADJUST], [MEMORY / SUBTITLE] [SETUP], [ uiop ], [AUDIO], [ENTER], [DISPLA Y], [RETURN] [NUMBER] (0~9, +10) Device operated CD .
[SOURCE CONTROL 1] [ 1 ], [ 2 ], [ 3 ], [ 0 ], [ 6 7 ], [ 8 9 ] [SOURCE CONTROL 2] 1 Set [SOURCE CONTROL 1] to “VIDEO”. 2 Set [SOURCE CONTROL 2] to the component to be registered (TV or SAT/CABLE). 3 Press [MEMORY] and [RETURN] at the same time.
The AVR-2309 is compatible with the following types of playback: • Multi-zone playback (ZONE2) • Bi-amp playback (front speakers) NO TE • For bi-amp playback, use speakers compatible with that type of connection. • When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker terminals.
Setting 3 : F Making bi-amp connections for the FL and FR channels in the MAIN ZONE and conducting 5.1-channel playback (switching with other modes not possible) FL SW C FR SL SR MAIN ZONE 5.
Multi-zone Operations Turning the Power On and Off G Operation on the main unit H Press <ZONE2 ON/OFF> . When the power turns on, the multi-zone indicator ( ) lights on the display. G Operation on the remote control unit H Press [ZONE2 ON] or [ZONE2 OFF] .
Surround back speakers Sound positioning directly to the rear can be achieved easily by adding a surround back speaker to a 5.1-channel system. In addition, the acoustic image extending between the si.
60 to 90 cm F ront speaker Surround speaker G 2 H When not using surround back speakers Subwoofer Surround speakers Monitor Center speaker Front speakers 60° 120° G As seen from above H G As seen from the side H Dolby Digital Dolby Digital is a multichannel digital signal format developed by Dolby Laboratories.
Audyssey DTS 96/24 DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization on DVD-Video. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 & other U.
Surround mode Signals and adjustabilit y in the dif ferent modes Channel output Parameter (def ault values are shown in parentheses) F ront L/R Center Surround L/R Surround Bac k L/R Subwoof er D.
Surround mode Signals and adjustabilit y in the dif ferent modes Parameter (def ault values are shown in parentheses) PRO LO GIC g / g x MUSIC mode only NEO:6 MUSIC mode only EXT . IN only T one (NO TE5) Night Mode (NO TE5) MultEQ Dynamic EQ (NO TE6) Dynamic V olume (NO TE7) REST ORER Panorama Dimension C.
But ton Note Input signals ANALOG PCM DTS-HD DTS DOLB Y DOLB Y DIGIT AL Surround mode Linear PCM (multi c h) Linear PCM (2c h) DTS-HD Master Audio DTS-HD High Resolution Audio DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
But ton Note Input signals ANALOG PCM DTS-HD DTS DOLB Y DOLB Y DIGIT AL Surround mode Linear PCM (multi c h) Linear PCM (2c h) DTS-HD Master Audio DTS-HD High Resolution Audio DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
0 Getting Star ted Connections Setup Playback Remot e Control Multi-zone Infor mation T roubleshooting ENGLISH Specifications Relationship Between Video Signals and Monitor Output Video convert In.
If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below.
Sympt om Cause Counter measure P age No sound is produced from subwoofer. • Subwoofer’s power not turned on. • The “Subwoofer” setting at “Speaker Configuration” is set to “No”. • The subwoofer is not properly connected. • The subwoofer’s volume is turned off.
Sympt om Cause Counter measure P age No picture appears. • The connections between the AVR-2309 and monitor are faulty. • The monitor’s input setting is wrong. • PURE DIRECT mode is set. • The player is connected using the component input connectors, the monitor is connected using the video (yellow) or S-Video output connectors.
n Audio section • Power amplifier Rated output: Front (A, B): 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.
PRESET CODE DVD Player/Bul-Ray Disc Player A Aiwa 009 D Denon 014, [111] z , 121 H Hitachi 010 J JVC 006, 011 K Konka 012, 013 M Magnavox 005 Mitsubishi 004 P Panasonic 014 Philips 005, 015, 016, .
PRESET CODE MGA 001, 039, 048, 056, 057, 058, 065, 081, 083 Midland 125 Minutz 066 Mitsubishi 001, 016, 039, 048, 056, 057, 058, 065, 081, 082, 083, 105 Montgomery Ward 011, 020, 144, 145, 146 Mot.
Denon Brand Company, D&M Holdings Inc. Printed in China 5411 10091 008D www.denon.com.
An important point after buying a device Denon AVR-2309 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denon AVR-2309 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denon AVR-2309 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denon AVR-2309 you will learn all the available features of the product, as well as information on its operation. The information that you get Denon AVR-2309 will certainly help you make a decision on the purchase.
If you already are a holder of Denon AVR-2309, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denon AVR-2309.
However, one of the most important roles played by the user manual is to help in solving problems with Denon AVR-2309. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denon AVR-2309 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
