Instruction/ maintenance manual of the product 955 3M
Go to page of 9
Operators Manual Book check unit 3M Model 955.
Index of Contents 1 Compone nts ................................................................................................................... .. 1-1 2 De signa ted applic ation ....................................................................
Components 1 Component s Togg le switch (sensitise/ desensitise) Togg le switch (veri fy) Optical sensor 1-1.
Designated Application 2 Designated applicati on 2.1 Compatible media BEATLES buch cd The Model 955 has been designed for sensitising and desensitising print ed medi a and compact discs only. The f ollowing security marker s can be used: Sensitise / Desensitise - Books: DS- B1-N/B1 DS-B2-N/ B2 DS-B0 - Compact Discs: DCD-1/DCD-2 2.
Safety 3 Safety In or der to be able to use the Model 955 without any problems, k indly observe the section titled General Safet y, and take note of any product specif ic safety instructions in this section. The Model 955 does not have an on/off - sw itch of its ow n.
Operation 4 Operation Switch the sensitise/desensitise switch t o the required operating mode. r a t o r ' s M a n u a l Sensitize Desensitize O p e Slide the book t hrough t he Model 955 as illustrated adjacent. The light beam f rom the opt ical sensor w ill be interrupt ed.
Operation 4.1 Verification The " Verify" funct ion can be used to check whether a security strip has been sensitised or not . Place the book in t he Model 955 as illustrated adjacent. Make sure that the light beam fr om the optical sensor is not interr upted.
Troubleshooting 5 T roubleshooti ng Malfunct ion Possible causes Remedy The sensitising / desensitising pulse is not trig ger ed. The optical sensor is dirty. Clean the optical sensor with suitable mater ials (e.g. cotton wool buds). The security mark er is not activated / deactivated althoug h the sensitising / desensitising pulse is trig gered.
Technical Data 6 T echnical Dat a Design: T able-top model A pplication: Sensitising and desensit ising of 3M Security Strips Method of re/ desensitizing: Electromag netic pulse Sensitisi ng and de-sensiti sing time: Less than 0.1 seconds Surrounding requirements: Recommended operat ing temper ature 10 °C to 35 °C.
An important point after buying a device 3M 955 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 955 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 955 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 955 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 955 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 955, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 955.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 955. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 955 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
