Instruction/ maintenance manual of the product TP20110 Demco
Go to page of 12
ASSEMBLY OPERATION REPLACEMENT PARTS READ complete manual CAREFULLY BEFORE attempting operation. 3-07 TP20110, REV.5 BOLT TORQUE SPECIFICATIONS Size Grade Torque 5/16" 5 20 ft/lbs. 3/8" 5 35 ft/lbs. 7/16" 5 56 ft/lbs. 1/2" 5 85 ft/lbs.
1. Extent and Duration of this Warranty: Your Demco product has a Lifetime Limited warranty to be free from defects in materials and workmanship under normal use and service from date of purchase by the original (first) retail owner, or until it is resold or transferred by the original owner.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN LOSS OF TOWING VEHICLE CONTROL, SEPARATION OF THE TOW BAR FROM THE TOWING VEHICLE, SEPARATION OF THE TOWED VEHICLE FROM THE TOW BAR, CAUSING SEVERE PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE.
2. Remove one plastic push fastener on top of facia. 3. Remove fasteners from front of belly pan to bottom of facia. 4. Remove one screw from facia to fender on each side and carefully remove facia. 2. Remove three plastic push fasteners on top of facia.
7. Cut plastic side shields even with bottom of bumper on each side. 8. Slide baseplate up from bottom. On driver’s side, start two bolts that were removed from tow eye bracket. 9. On passenger’s side, push baseplate up and temporal- ity clamp in place.
10. On passenger’s side, drill top hole of baseplate using 3/8 ” drill bit, using baseplate hole as template. This hole must line up with hole on inside of box frame. 11. Install 3/8 ” x 3-1/2 ” bolt, 3/8 ” lock washer, and install through base plate frame, and thread into threaded nut plate on inside of frame.
15. Reinstall ceramic box on driver’s side. 14. Slide long nut strip into end of bumper and use 3/8 ” x 1 ” bolt and 3/8 ” lock washer and tighten bolt. 13. Drill 3/8 ” hole through bottom of bumper, using base- plate as template. This is located under bumper on passenger’s side.
16. Cut facia crossbar out according to picture on each side. 17. Reinstall facia and hardware. 16. Drill 3/8 ” hole through bottom of bumper, using base- plate as template. This is located under bumper on passenger’s side. 17. Slide short nut strip into hole in bumper and use 3/8 ” x 1 ” bolt and 3/8 ” lock washer and tighten bolt.
How satisfied are you with our product? ❍❍ ❍ ❍ How satisfied are you with the dealership/distributor sales staff? ❍❍ ❍ ❍ Dealer/Distributor Name City State How satisfied are you with t.
P ostage Dethmers Manufacturing Company 4010 320th Street, Box 189 Boyden, Iowa 51234.
NO TES.
DETHMERS MFG. COMPANY P.O. BOX 189 4010 320th St., BOYDEN, IA. 51234 PH: (712) 725-2311 FAX: (712) 725-2380 or 1-800-845-6420 TOLL FREE: 1-800-54DEMCO (1-800-543-3626) www.
An important point after buying a device Demco TP20110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Demco TP20110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Demco TP20110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Demco TP20110 you will learn all the available features of the product, as well as information on its operation. The information that you get Demco TP20110 will certainly help you make a decision on the purchase.
If you already are a holder of Demco TP20110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Demco TP20110.
However, one of the most important roles played by the user manual is to help in solving problems with Demco TP20110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Demco TP20110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
