Instruction/ maintenance manual of the product 50-868 Deltaco
Go to page of 11
INSTRUCTION MANUAL Air Cleaner 50-868 P ART NO. 410-09-651-0004 - 09-23-02 Copyright © 2002 Delta Machinery ESP AÑOL: PÁGINA 11 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 ADDITIONAL SAFETY RULES FOR AIR CLEANERS 1. DO NOT USE THIS UNIT TO FIL TER MET AL DUST . Combining wood and metal dust can cre- ate an explosion or fire hazar d. This unit is intended to filter non-explosive atmospheres only . 2 . WARNING: DUST GENERA TED BY CERT AIN WOODS AND WOOD PRODUCTS CAN BE HAZ- ARDOUS TO YOUR HEAL TH.
3 13. DO NOT A TTEMPT TO REMOVE OR REPLACE THE FIL TER(S) WHILE THE UNIT IS RUNNING. Make certain that the unit is disconnected from the power sour ce. 14. MAINT AIN THE UNIT IN TOP CONDITION . Keep filters clean for optimum performance. Follow all instructions for changing and cleaning filters.
INTRODUCTION Model 50-868 Delta Air Cleaner is specifically designed to quietly circulate and filter non-metallic dust which is generated throughout the work ar ea.
5 A - Air cleaner B - Four 1” eye-bolts C - Four 1/4-20 flange nuts D - Four rubber feet E - Remote Control Unit (Batteries not included) A B C Fig. 2 D E ASSEMBL Y INSTRUCTIONS Determine whether the Air Cleaner will be used on the floor , on a bench, or hanging from an overhead support.
This machine weighs 50 pounds. When mounting overhead, be certain that the unit is secure- ly fastened and supported. 6 MOUNTING THE AIR CLEANER TO THE CEILING OR OVERHEAD SUPPOR T USING THE AIR CLEANER ON A BENCH OR FLOOR SURF ACE 1. Locate (4) self-adhesive rubber feet (A) Fig.
7 1. Locate the four 1" eye bolts and the four 1/4-20 flange nuts supplied with the unit. 2. Use a 5/32” Allen wrench (not supplied) to remove the four screws, (C) Fig. 5 fr om the top of air cleaner (D). 3. Thread one flange nut on the bolt approximately 3/4" of the threaded portion of the bolt.
8 Fig. 7A USING THE REMOTE CONTROL T o reduce the risk of fire or electric shock, do not use this unit with any solid-state speed control device. The r emote control pr ovided with this unit is not considered a solid-state device. The Air Cleaner is equipped with a REMOTE CONTROl (A) Fig.
9 MAINTENANCE CHANGING AND CLEANING FIL TERS 1. T o remove the outer first stage filter (A) Fig. 8, lift and pull out the bottom of the filter as shown. 2. Remove inner bag filter (B) Fig. 9 in the same manner . 3. The first stage filter can be replaced or cleaned depending on its condition.
10 P AR TS, SERVICE OR WARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standards and ar e serviced by a net- work of Porter -Cable • Delta Factory Service Centers and Delta Authorized Service Stations.
The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): Auto-Set ® , BAM- MER ® , B.O.
An important point after buying a device Deltaco 50-868 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Deltaco 50-868 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Deltaco 50-868 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Deltaco 50-868 you will learn all the available features of the product, as well as information on its operation. The information that you get Deltaco 50-868 will certainly help you make a decision on the purchase.
If you already are a holder of Deltaco 50-868, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Deltaco 50-868.
However, one of the most important roles played by the user manual is to help in solving problems with Deltaco 50-868. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Deltaco 50-868 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
