Instruction/ maintenance manual of the product DTC1000R Delta Electronics
Go to page of 25
Delt a T emperature Controller User Manual.
Delta T emperature Controller User Manual 2007-09-17 - 2 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Foreword The user manual details the process of using Delt a DT series temperature controllers step by step for beginners to easily set up all kinds of parameters in a short time.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 3 - 2007-09-17 CHAPTER 1: D EF AUL T S ETTINGS OF P ARAMETERS 1.1 Default Settings in T emperature Controller DT A DTB DTC Model: DT A4896R1 Model: DTB4896RR Model: DTC1000R PV SV PV SV PV SV Not connected to sensor 0.
Delta T emperature Controller User Manual 2007-09-17 - 4 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED DT A DTB DTC Model: DT A4896R1 Model: DTB4896RR Model: DTC1000R PV SV PV SV PV SV Adjust temperature Input compensation 0.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 5 - 2007-09-17 Display Explanations PV SV S tatus of the temperature controller Default value Press “down” key continuously until the value reaches 1357 (please DO NOT modify this value; otherwise system con f usion may occur) .
Delta T emperature Controller User Manual 2007-09-17 - 6 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller Communication address Comm.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 7 - 2007-09-17 DTCOM Sof tw are Explanations Clear the user ’s settings. Function address = 4724; Write dat a = 1234 (Please DO NOT modify this value; otherwise system confusion may occur .
Delta T emperature Controller User Manual 2007-09-17 - 8 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller Press “down” key continuously until the value reaches 1357 (please DO NOT modify this value; otherwise system con f usion may occur) .
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 9 - 2007-09-17 Display Explanations PV SV S tatus of the temperature controller OFF: communication write-i.
Delta T emperature Controller User Manual 2007-09-17 - 10 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED DTCOM Sof tw are Explanations Clear the user ’s settings. Function address = 474E; Write dat a = 1234 (Please DO NOT modify this value; otherwise system confusion may occur .
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 1 1 - 2007-09-17 DTCOM Sof tw are Explanations Function address = 472A; Write dat a = 1234 (Please DO NOT modify this value; otherwise system confusion may occur .
Delta T emperature Controller User Manual 2007-09-17 - 12 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller Message displayed when DT A has not yet been connected to a sensor . Press for more than 3 seconds to enter initial setting mode Select the sensor connected.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 13 - 2007-09-17 Parameters relevant to ON/OFF control Press in the main screen of DT A to enter the “regulation mode”. Display Explanations PV SV S tatus of the temperature controller or Set up hysteresis.
Delta T emperature Controller User Manual 2007-09-17 - 14 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller The control modes include: PID, ON/OFF , MANUAL. Default = PID. Select “PID” here.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 15 - 2007-09-17 CHAPTER 3: C ONTROL M ODES IN D TB 3.1 ON/OFF There are four control modes in DTB: ON/OFF , MANUAL, PID and PID PROG . T o switch to ON/OFF mode, first press for 3 seconds to enter the “initi al setting” mode.
Delta T emperature Controller User Manual 2007-09-17 - 16 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller Set up Alarm mode 2. Defaul t = alarm output disabled. Set up Alarm mode 3. Defaul t = alarm output disabled.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 17 - 2007-09-17 Display Explanations PV SV S tatus of the temperature controller The control modes include: ON/OFF , MANUAL, PID and PID PROG . Default = PID.
Delta T emperature Controller User Manual 2007-09-17 - 18 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller ON/OFF of auto-tuning The 0 th PID p arameter . There are 4 groups of PID p arameters built in DTB.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 19 - 2007-09-17 3.4 PID PROG Press for 3 seconds in the main screen to enter the “initial setting mode”. Press several times until the parameter is displayed.
Delta T emperature Controller User Manual 2007-09-17 - 20 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Display Explanations PV SV S tatus of the temperature controller ＋ Remaining time in the.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 21 - 2007-09-17 Display Explanations PV SV S tatus of the temperature controller Set up the position of decimal point Key-locked function Output volume. In PID PROG cont rol mode, this is a read-only parameter and cannot be modified.
Delta T emperature Controller User Manual 2007-09-17 - 22 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED Set up hysteresis. Default = heating hysteresis.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 23 - 2007-09-17 4.2 MANUAL Switch the control mode to MANUAL mode. Set up heating or cooling control cycle. Default = heating, 20 seconds per cycle. Manually adjust the output per centage.
Delta T emperature Controller User Manual 2007-09-17 - 24 - © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED 4.3 PID Switch the contro l mode to PID mode Y ou can conduct auto-tuning on the defau.
Delta T emperature Controller User Manual © DEL T A ELECT RONICS, INC. ALL RIGHTS RESERVED - 25 - 2007-09-17 4.4 PID PROG Switch the control mode to PID PROG mode The 64 step s come from the combination of 8 patterns and 8 step s for each pattern.
An important point after buying a device Delta Electronics DTC1000R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta Electronics DTC1000R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta Electronics DTC1000R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta Electronics DTC1000R you will learn all the available features of the product, as well as information on its operation. The information that you get Delta Electronics DTC1000R will certainly help you make a decision on the purchase.
If you already are a holder of Delta Electronics DTC1000R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta Electronics DTC1000R.
However, one of the most important roles played by the user manual is to help in solving problems with Delta Electronics DTC1000R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta Electronics DTC1000R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
