Instruction/ maintenance manual of the product AP200 Delta
Go to page of 12
INSTRUCTION MANUAL Air Cleaner (Model AP200) P ART NO. 906565 - 07-18-02 Copyright © 2002 Delta Machinery ESP AÑOL: PÁGINA 13 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury .
3 ADDITIONAL SAFETY RULES FOR AIR CLEANERS 1. DANGER: DO NOT USE THIS UNIT TO FIL TER MET AL DUST . Combining wood and metal dust can create an explosion or fire hazar d. This unit is intended to filter non-explosive atmospher es only . 2. WARNING: DUST GENERA TED BY CER T AIN WOODS AND WOOD PRODUCTS CAN BE HAZARDOUS TO YOUR HEAL TH.
4 POWER CONNECTIONS A separate electrical circuit should be used for your machines. This cir cuit should not be less than #12 wir e and should be protected with a 20 Amp time lag fuse.
Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and matching r eceptacle which will accept the machine’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the curr ent of the machine.
6 AIR CLEANER P ARTS Fig. 2 1 - Air cleaner 2 - Four 5/16-18x1½" eye-bolts 3 - Four 5/16-18 flange nuts 4 - Four rubber feet 1 2 3 4.
7 ASSEMBL Y INSTRUCTIONS WARNING: FOR YOUR OWN SAFETY , DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETEL Y ASSEMBLED AND YOU READ AND UNDERST AND THE ENTIRE INSTRUCTION MANUAL.
8 MOUNTING THE AIR CLEANER TO THE CEILING OR OVERHEAD SUPPOR T WARNING: THIS TOOL WEIGHS APPROXIMA TEL Y 50 POUNDS. MAKE CERT AIN THE UNIT IS SECUREL Y SUPPORTED WHEN MOUNTING TO A CEILING OR OVERHEAD SUPPORT . 1. Remove four screws, one of which is shown at (C) Fig.
OPERA TING CONTROLS ON/OFF SWITCH The Air Cleaner is equipped with an in-line rocker switch (M) Fig.11, located on the power cord (N). T o start or stop the motor , press downwar d on the rocker switch. NOTE: The switch has markings on the side to determine the on/off position.
10 Fig. 16 5. Fig. 16, illustrates the air cleaner being used in a floor sanding application. Fig. 17 6. Fig. 17, illustrates the air cleaner suspended fr om wooden ceiling supports for overhead operation. WARNING: Keep a minimum of seven feet between bottom of air cleaner and the floor surface.
11 3. Remove inner bag filter (J) Fig. 19, in the same manner . Fig. 19 J 4. The first stage filter (H) Fig. 18, can be replaced or cleaned depending on its condition. This filter can be cleaned in one of two methods: a shop-vac can be used to remove the dust, or compr essed air can be used to blow the dust out of the filter .
T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in wo.
An important point after buying a device Delta AP200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta AP200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta AP200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta AP200 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta AP200 will certainly help you make a decision on the purchase.
If you already are a holder of Delta AP200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta AP200.
However, one of the most important roles played by the user manual is to help in solving problems with Delta AP200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta AP200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
