Instruction/ maintenance manual of the product 78-904 Delta
Go to page of 12
INSTRUCTION MANUAL D A T E D 3-5-96 P A R T NO. 1349984 'Delt a International Machinery Corp. 1996 Biesemeyer fi T -Square fi Commercial Fence Systems 5 0 C a p acity (Model 78-904) 3 0 C a p a.
INTRODUCTION The 50 cap acity (model 78-904) and 30 c a p acity (model 78-907) Biesemeyer fi T -Square fi Commercial fence systems are specially designed to be used with: Delt a 1 0 T i l t i n g Ar.
If you purchased the accessory right extension t able (model 78-925 for 50 c a p acity fence or model 78-927 for 30 c a p acity fence) carefully unp ack the extension t able from the shipping cont ainer . Figure 3 illustrates the right extension t able removed from the cont ainer .
Fig. 4 If you purchased the accessory leg kit (model 78-952) for use with the right extension t able, Figure 4 illustrates the legs and loose items supplied with this accessory .
Fig. 5 Fig. 6 Fig. 7 Fig. 8 2 . Assemble the front rail (A) Fig. 5, to front of saw t able using the two 3/8-16 x 1-1/4 long flat head Phillip s screws (B), 7/8 flat washers, lock washers and 3/8-16 hex nut s supplied.
6 Fig. 9 Fig. 10 Fig. 1 1 8 . Position the two legs (H) Fig. 10, at the two far corners of the inside of one end of the extension t able, as shown, and mark the position of the eight holes to be drilled into the bottom of the t able.
Fig. 12 Fig. 13 Fig. 14 Fig. 15 1 0. Fasten the leg bracket (L) Fig. 12, to the end piece (J) of the t able using the two 1-1/2 long flat head P h i l l i p s screws, flat washers and hex nut s (M ) Figs. 1 1 and 12. Fasten the remaining leg to the extension t able in the same manner .
Fig. 17 Fig. 18 Fig. 19 1 6. Figure 19 illustrates the switch and nipple (W) assembled to the switch adapter (X). The switch adapter will be fastened to the front rail (A) and guide tube through holes (Y) i n the front rail af ter the guide tube is fastened to the front rail (A).
Fig. 20 Fig. 21 Fig. 22 Fig. 23 1 7 . Lay the guide tube (B) Fig. 20, on the saw t able as shown, and line up the threaded holes (C) on bottom of guide tube (B) with the through holes (D) on the front rail ( A ) .
Fig. 24 Fig. 25 Fig. 26 FENCE OPERA TION IMPORT A N T : Before operating fence, make sure the fence is adjusted p arallel to the miter gage slot, as explained later on in this manua l . 1 . T o move the fence along the guide rail, simply lif t up clamp lever (A) a s shown in Fig.
Fig. 27 Fig. 28 Fig. 29 Fig. 30 ADJUSTING FENCE P ARALLEL T O MITER GAGE SLOTS NOTE: Delt a t able saws have been aligned at the factory so that the miter gage slot s i n the t able are p arallel with the saw blade.
LUBRICA TION 1 . Apply p aste wax to fence and guide tube sliding sur - faces weekly . Also, saw t able and extension t able surface should be waxed of t e n . 2 . Apply grease to cam lock (A) Fig. 31, and cam foot (B) occasionally to prevent wear . Fig.
An important point after buying a device Delta 78-904 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 78-904 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 78-904 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 78-904 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 78-904 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 78-904, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 78-904.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 78-904. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 78-904 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
