Instruction/ maintenance manual of the product 23-589 Delta
Go to page of 9
INSTRUCTION MANUAL 6" Bench Grinder (Model 23-589) P ART NO. 901908 (013) Copyright © 2001 Delta Machinery ESP AÑOL: PÁGINA 11 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury .
3 ADDITIONAL SAFETY RULES FOR GRINDERS 1. DO NOT OPERA TE your tool until it is completely assembled and installed according to the instructions. 2. IF YOU ARE NOT thoroughly familiar with the oper- ation of grinders, obtain advice from your supervisor , instructor or other qualified person.
4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the carton. Remove the pr otective coating from all unpainted parts. This coating may be removed with a soft cloth moistened with ker osene (do not use acetone, gasoline, or lacquer thinner for this purpose).
5 Fig. 3 ASSEMBL Y ASSEMBLING TOOL RESTS 1. Assemble the v-grooved tool r est (A) Fig. 3, to the inside of the right wheel guard using two 5/16-18x5/8" hex head screws (B), and 3/4" flat washers (C). 2. Assemble the remaining flat surfaced tool r est (D) Fig.
6 Fig. 7 2. Align the holes in the eye shield with the holes in the spark guard and place the eye shield bushing (A) Fig. 7, in between the space in the spark guard. Fig. 8 3. Insert the eye shield bolt (A) Fig. 8, through the hole in the eye shield (B), eye shield bushing (C), and spark guard (D).
7 EXTENSION CORDS Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and a 3-hole receptacle which will accept the tool’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the current of the tool.
8 Fig. 14 ST AR TING AND STOPPING GRINDER The switch (A) Fig. 14, is located on the front of the grinder . T o turn the grinder “ON” push the left hand portion of the switch and to turn the grinder “OFF” push the right hand portion of the switch.
9 Delta Building T rades and Home Shop Machinery T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine accessory whi.
An important point after buying a device Delta 23-589 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 23-589 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 23-589 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 23-589 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 23-589 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 23-589, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 23-589.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 23-589. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 23-589 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
