Instruction/ maintenance manual of the product EUROCHEF - PRO DeLonghi
Go to page of 16
1 Air-2 EUROCHEF - PRO W ALL HOOD INST ALLA TION INSTR UCTIONS Shown with accessory Duct Cover Kit and accessory W arming Lamp Kit APPROVED FOR ALL RESIDENTIAL APPLIANCES FOR RESIDENTIAL USE ONL Y PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING . INST ALLA TION MUST COMPL Y WITH ALL LOCAL CODES.
2 Air-2 EUROCHEF - PRO W ALL HOOD HOODS WEIGHT MODEL NUMBER 24” range hood with 600 CFM blower 22 lbs E C PH24S 30” range hood with 600 CFM blower 30 lbs E C PH30S 36” range hood with 600 CFM bl.
3 Air-2 EUROCHEF - PRO W ALL HOOD CONSIDERA TIONS BEFORE INST ALLING HOOD 1 . For the most efficient air flow exhaust, use a straight run or as few elbows as possible. 2 . Do not use flex ducting use metal ductwork only to reduce the risk of fire. 3 .
4 Air-2 EUROCHEF - PRO W ALL HOOD CONTENTS AND P AGE NUMBER Product Dimensions....................................................... pg.4 Advance Planning...........................................................pg.5 Using Duct Cover Accessories....
5 Air-2 EUROCHEF - PRO W ALL HOOD Cabinetry and electrical placement for 24-inch deep wall hoods. lnstallatian dimensions for 24 deep wall hoods. ADV ANCE PLANNING USING DUCT COVER ACCESSORIES T o avoid gap s, plan the hood inst allation height for duct cover use.
6 Air-2 EUROCHEF - PRO W ALL HOOD REMOVE THE RANGEHOOD P AR TS PROVIDED Locate the parts packed with the hood. no. 4 screws to fix duct transition (torx 20) 3,9 x 9,5 mm no.3 screws and no.3 wall anchors (Philips) M5 x 57 mm Screws to hang and secure hood to the Wood Bracket (torx 20) 4,5 x 20 mm no.
7 Air-2 EUROCHEF - PRO W ALL HOOD STEP 1 DETERMINE HOOD, DUCTWORK AND WIRING LOCA TIONS • Use a level to draw the cooktop centerline vertically up the wall to the ceiling. • Measure desired distance from the bottom of the hood to the cooking surface, 24" min.
8 Air-2 EUROCHEF - PRO W ALL HOOD model 30 36 model 48 two blowers V ertical Discharge (with Blower Upgrade Kit) BLOWER POSITION CHART model 24 V ertical Discharge BLOWER POSITION OPTION model 30 36 V.
9 Air-2 EUROCHEF - PRO W ALL HOOD IF CHANGING BLOWER POSITION WARNING: • disconnect the motor before changing position; reconnect after it is moved. A TTENTION: Débrancher le moteur avant de change.
10 Air-2 EUROCHEF - PRO W ALL HOOD • Secure the Wood Bracket to 2 or more vertical studs, using at least 2 of the 4 supplied long screws. IMPORT ANT : Screws must penetrate at least 1-1/2" into verti- cal studs. Countersink screws into support.
11 Air-2 EUROCHEF - PRO W ALL HOOD STEP 3B: AL TERNA TE MOUNTING METHOD INST ALL HOOD T O SOFFIT OR BENEA TH CABINETS SKIP THIS STEP IF USING W ALL MOUNTING METHOD When necessary , the hood may be installed so that it is supported by the soffit. • The soffit should be constructed with 2 x 4’s.
12 Air-2 EUROCHEF - PRO W ALL HOOD ASSEMBL Y AND INST ALLA TION OF THE DUCT COVERS & RECIRCULA TING KIT COVER Optional duct covers shown in advance planning section may be used to fill the space between the hood and ceiling in wall mount installations.
13 Air-2 EUROCHEF - PRO W ALL HOOD • Use screws removed in S tep 2 to re-install Filter Frame, per photograph. STEP 7: TIGHTEN - HANGING SCREWS STEP 8: RE-INST ALL THE FIL TER FRAME • With Filter Frame still removed from S tep 2 • Adjust hood up to eliminate any gaps at ceiling.
14 Air-2 EUROCHEF - PRO W ALL HOOD STEP 10: TEST FUNCTION OF HOOD - Blower - Light STEP 9: INST ALL FIL TER • Place filter drip trays into the bottom rear of the hood. • Insert top of grease filter first, than rotate bottom filter and drop into grease tray .
15 Air-2 EUROCHEF - PRO W ALL HOOD CARE AND USE REPLACING HALOGEN BULB OPERA TION Press any speed to turn hood on. Press same button to turn hood off. Active speed is shown by a button back light.
16 Air-2 EUROCHEF - PRO W ALL HOOD EUROCHEF U.S.A. 41 MERCEDES W A Y SUITE 25 EDGEWOOD NEW YORK 1 1717 – TEL. 866-844-6566 WWW .DELONGHIMAJORAPPLIANCES.
An important point after buying a device DeLonghi EUROCHEF - PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi EUROCHEF - PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi EUROCHEF - PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi EUROCHEF - PRO you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi EUROCHEF - PRO will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi EUROCHEF - PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi EUROCHEF - PRO.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi EUROCHEF - PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi EUROCHEF - PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
