Instruction/ maintenance manual of the product ESAM 4000.B DeLonghi
Go to page of 15
6 CONTENTS INTRODUCTION .................................. 7 Symbols used in these instructions .................. 7 Letters in brackets ............................................. 7 T roubleshooting and repairs .............................. 7 SAFETY .
7 INTRODUCTION Thank you for choosing the ESAM4 automatic coffee and cappuccino maker . We hope you enjoy using your new appliance. T ake a few minutes to read these instructions. This will avoid all risks and damage to the ma- chine. Symbols used in these instructions Important warnings are identified by these symbols.
8 DESIGNA TED USE This appliance is designed and made to prepare coffee and heat drinks. All other use is conside- red improper . This appliance is not suitable for commercial use. The manufacturer is not liable for damage deri- ving from improper use of the appliance.
9 PRELIMINARY CHECKS Checking the appliance After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
10 coffee spouts and is collected in the drip tray un- derneath. Avoid contact with splashes of water . • T oturnthe applianceon, pressthe but- ton (fig. 4). The and lights flash while the appliance is heating up and per for - ming an automatic rinse cycle.
11 clockwise, other wise the coffee may be de- livered too slowly (a drop at a time), particu- larly when making two cups of coffee. Selecting the quantity of coffee in the cup Adjust the coffee quantity selection knob (B9) to set the required quantity .
12 section “Meaning of lghts” on page 17. Making coffee using pre-ground coffee Important! • Never add pre-ground coffee when the ma - chine is off or it could spread through the inside of the machine and dirty it. This could damage the appliance.
13 maker into a container until the lights and stop flashing. Danger of burns! Avoid contact with splashes of water . Cleaning the cappuccino maker after use. Clean the cappuccino maker each time you use it to avoid the build-up of milk residues or blocka- ges.
14 and clean. • Empty the grounds container and clean tho - roughly to remove all residues left on the bottom. Important! When removing the drip tray , the grounds con- tainer must be emptied, even if it contains few grounds.
15 Please note! If the infuser is difficult to insert, before insertion, adapt it to the right size by pressing the two levers shown in the figure. 7. Once inserted, make sure the two red buttons have snapped out. 8. Replace the drip tray and grounds container .
16 SETTING WA TER HARDNESS The light comes on after a period of time established according to water hardness. The machine is set by default for a hardness va- lue of 4 (very hard water). The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.
17 MEANING OF LIGHTS DURING NORMAL OPERA TION LIGHTS DESCRIPTION MEANING 1 8 9 2 3 4 5 6 7 10 11 The lights flash The coffee maker is not ready to make coffee (the water has not yet reached the ideal temperature).
18 MEANING OF THE ALARM LIGHTS LIGHTS DESCRIPTION MEANING WHA T TO DO 1 2 3 4 5 6 7 8 9 10 11 The light is on steadily Insufficient water in tank or tank not correctly in place Fill the tank with water and/or in- sert it correctly , pushing it as far as it will go until it clicks into place.
19 LIGHTS DESCRIPTION MEANING WHA T TO DO 1 2 3 4 5 6 7 8 9 10 11 The lights flash alternately The coffee maker has just been turned on, the infu- ser is not inserted correct- ly and the service door is not correctly closed. Press the word PUSH on the infu- ser until it clicks into place.
20 PROBLEM POSSIBLE CAUSE SOLUTION Coffee does not come out of one of the spouts. • Thespoutsareblocked. • Cleanthespoutswithatoothpick. The coffee does not come out of the spouts, but from around the service door .
An important point after buying a device DeLonghi ESAM 4000.B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi ESAM 4000.B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi ESAM 4000.B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi ESAM 4000.B you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi ESAM 4000.B will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi ESAM 4000.B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi ESAM 4000.B.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi ESAM 4000.B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi ESAM 4000.B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
