Instruction/ maintenance manual of the product ESAM 3600 DeLonghi
Go to page of 16
INDEX 1 DESCRIPTION OF THE APPLIANCE (see page 3) . . . . . . . . . . . . . . . . . . . . . . .24 2 SAFETY W ARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 3 INST ALLA TION . . . . . . . . . . . . . . . .
24 1 DESCRIPTION OF THE APPLIANCE (SEE P AGE 3) A. Grinding coarseness regulator B. Coffee beans container C. Bean container lid D. Central lid for ground coffee E. Compartment for measure F. Cup warmer tray G. Ground coffee funnel H. Milk container lid/milk frother I.
3 INST ALLA TION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard.
3. Place a cup under the hot water spout (fig. 3). (If the water spout is not in place, INSERT W A TER SPOUT is displayed. Attach it as shown in figure 4, making sure the arrow on the spout is lined up with the arrow on the control panel of the appliance, fig.
27 GB 3. Press the button to make a short cof fee (fig. 11), the button for a normal coffee or the but- ton for a long coffee. To make 2 cof fees, press the button twice (within 2 seconds). To change the quantity of coffee delivered automatically into the cup, follow the instructions in section 7.
28 Empty the grounds container and clean thoroughly , making sure all residues deposited on the bottom are removed. IMPORT ANT : when removing the drip tray , the grounds container MUST be emptied, even if it is not com- pletely full.
9 PREP ARING ESPRESSO COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) 1. Press the button (fig. 16) to select the ground coffee function. This disables the cof fee mill function. The appliance displays: READY PRE-GROUND 2. Lift the lid in the centre, place one level measure of ground coffee in the funnel (see fig.
11 CHANGING THE QUANTITY OF HOT W A TER The appliance is factor y preset to automatically deliver 250 ml of hot water . To change these quantities, proceed as follows: 1. Attach the water spout (fig. 4). 2. Position a container under the spout (fig. 3).
13 PREP ARING FROTHED MILK (WITHOUT COFFEE) 1. Remove the lid of the milk container . 2. Fill the container with the quantity of milk you want to prepare (fig.19). 3. Replace the milk container lid. 4. Attach the milk container to the appliance (fig. 22).
32 CORRECT INCORRECT The two red buttons have snapped out CORRECTL Y The two red buttons have not snapped out 1. turn the appliance off by pressing the button (fig. 6) (do not unplug) and wait for the display to go off; 2. open the ser vice door (Fig.
GB 33 NOTE 3: If it is still hard to insert the infuser , leave it out of the appliance, close the ser vice door , unplug from the mains, then plug in again. W ait for all the lights to go off after the self-diagnosis, then open the door and replace the infuser .
34 3. Press the button to set the auto-start time. (If you hold the button down, the time is changed rapidly). 4. Press the button to confirm the value; 5. Press once and the appliance displays the message: AUTO-START NO Press the button to modify the function (the appliance displays: AUTO-START Yes ) 6.
RINSING 15. When the water tank is empty , the appliance displays the message: RINSING COMPLETE PRESS OK 16. Press the OK button and refill the water tank with clean water . 17. The descale programme is now terminated and the appliance is ready to make cof fee again.
16.7 RESETTING F ACTORY DEF AULT SETTINGS (RESET) If you change the original values, the factor y default values can be reset as follows: 1. Press the button then press repeatedly until the appliance displays: RESET TO DEFAULT NO 2. Press the button and the appliance displays "RESET TO DEF AUL T YES: 3.
37 GB PRESS NEXT CHANGE • After cleaning, the infuser has probably been left out of the coffee maker . • Leave the ser vice door closed and the infuser out of the appliance, then follow the instructions displayed.
38 The coffee does not come out of the spouts, but rather around the ser vice door . • The holes in the spouts are clogged with dr y coffee. • The mobile drawer inside the ser vice door is blocked and cannot swing. • Scrape the holes with a needle (see section 15.
An important point after buying a device DeLonghi ESAM 3600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi ESAM 3600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi ESAM 3600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi ESAM 3600 you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi ESAM 3600 will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi ESAM 3600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi ESAM 3600.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi ESAM 3600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi ESAM 3600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
