Instruction/ maintenance manual of the product ECAM 23.420.SB DeLonghi
Go to page of 16
6 CONTENTS INTRODUCTION .................................. 7 Symbols used in these instructions ...................7 Letters in brackets .............................................7 T roubleshooting and repairs ..............................7 SAFETY .
7 INTRODUCTION Thank you for choosing the ECAM 23.420 auto- matic coffee and cappuccino maker . We hope you enjoy using your new appliance. T ake a few minutes to read these instructions. This will avoid all risks and damage to the ma- chine. Symbols used in these instructions Important warnings are identified by these symbols.
8 DESIGNA TED USE This appliance is designed and made to prepare coffee and heat drinks. All other use is conside- red improper . This appliance is not suitable for commercial use. The manufacturer is not liable for damage deriving from improper use of the appliance.
9 Description of the accessories (page 2 - C ) C1. Measure C2. Cleaning brush C3. Descaler bottle C4. Water softener filter (certain models only) PRELIMINARY CHECKS Checking the appliance After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
10 TURNING THE APPLIANCE ON Please note: Before turning the appliance on, make sure the main switch on the back of the appliance is in the I position (fig. 1). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which can- not be interrupted.
11 Auto-start Y ou can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee imme- diately . Please note: T o activate this function, the time must already have been set correctly .
12 the machine each time the button is pressed or an accessor y is inserted/removed. The beep is active by default. 1. Press the P button to enter the menu; 2. T urn the selection knob (fig. 8) until “Beep” is displayed; 3. Press the button. “Deactivate?” or “Acti- vate?” is displayed; 4.
13 Please note: The grinding adjustment knob must only be tur- ned when the coffee mill is in operation. If the coffee runs off too slow- ly or not at all, turn one click clockwise towards “7”.
14 4. Press the 1 cup coffee button (fig. 12). 5. Preparation begins. The amount of coffee se- lected is displayed together with a progress bar which gradually fills as preparation pro- gresses. MAKING CAPUCCINO AND HOT MILK (NOT FROTHED) Important! Danger of burns During preparation, steam is given off.
15 1. Place a container under the cappuccino ma- ker (as close as possible to avoid splashes) (fig. 17). 2. T urn the steam knob to the I position (fig. 4).“HOT W A TER...” isdisplayed and deliver y begins. 3. Stop by turning the steam knob to the 0 po- sition.
16 2. Remove the residues with a vacuum cleaner (fig. 25). Cleaning the water tank 1. Clean the water tank (A9) regularly (about once a month and whenever you replace the water softener filter (if provided) with a damp cloth and a little mild washing up liquid.
17 Please note: Use De’Longhi descaler only . Under no circumstances should you use sulpha- mic or acetic based descalers. Their use invalida- tes the guarantee. Failure to descale the appliance as described also invalidates the guarantee. 1. T urn the machine on.
18 16. T urn the steam knob (fig. 4) to the “0” posi- tion. The appliance returns automatically to the “ready for coffee” state. The new filter is active and indicated by an aste- risk displayed under “Install filter”. Y ou can now use the coffee maker .
19 appliance of its removal as follows: 1. Extract the tank and exhausted filter; 2. Press the P button to enter the menu; 3. T urn the selection knob (fig. 8) until “Install filter*” is displayed; 4. Press the button; 5. “Deactivate?” is displayed; 6.
20 DISPLA YED MESSAGES DISPLA YED MESSAGE POSSIBLE CAUSE REMEDY FILLT ANK! • Insufcientwaterinthetank. • Fillthetankwithwaterand/orinsertit correctly , pushing it as far as it will go until it clicks into place (fig.
21 TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot • Thecupswerenotpreheated. • Warmthecupsbyrinsingthemwithhot water(N.
An important point after buying a device DeLonghi ECAM 23.420.SB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi ECAM 23.420.SB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi ECAM 23.420.SB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi ECAM 23.420.SB you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi ECAM 23.420.SB will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi ECAM 23.420.SB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi ECAM 23.420.SB.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi ECAM 23.420.SB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi ECAM 23.420.SB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
