Instruction/ maintenance manual of the product XPS 210 Dell
Go to page of 136
www .dell.com | support.dell.com Dell™ XPS™ 210 Owner’ s Manual Model DCCY * Not present on certain computers. front panel door (push to open) power button power light diagnostic lights headphon.
Notes, Notices, and Cautions NOTE: A NOTE indicates important i nformation that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential da mage to hardware or loss of da ta and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for propert y damage, personal injury , or death.
Contents 3 Contents Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 Setting Up and Using Y our Computer . . . . . . . . . . . . . . . . 13 Front and Back V iew of the Computer . . . . . . . . . . . . . . . . . .
4 Contents Intel ® Viiv™ T echnology (Optional) . . . . . . . . . . . . . . . . . . . . . . . 30 Using Intel ® Viiv™ Quick Resume T echnology (Optional) . . . . . . . . . 30 Enabling the QRT Feature in Sy stem Setup . . . . . . . . . . . . . . .
Contents 5 Sound and Speak er Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 46 No sound from speakers . . . . . . . . . . . . . . . . . . . . . . . . . . 46 No sound from headphones . . . . . . . . . . . . . . . . . . . . . . . . 47 Video and Monitor Problems .
6 Contents Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Connecting Drive Cables . . . . . . . . . . . . . . . . . . . . .
Contents 7 Cleaning Y our Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Computer , Keyboa rd, and Monitor . . . . . . . . . . . . . . . . . . . . 109 Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 CDs and DVDs .
8 Contents.
Finding Information 9 Finding Information NOTE: Some features or media may be optional and may not sh ip with your computer . So me features or media may not be available in certain countries. NOTE: This Owner’ s Manual is av ailable as a PDF at support.
10 Finding Information • How to set up my computer Setup Diagram • Service T ag and Express Service Code • Microsoft ® W indows ® P roduct Key Label Service T ag and Microsoft Windows Product Key These labels are located on your computer . • Use the Service T ag to identify your computer when you use support.
Finding Information 11 • Solutions — T roubleshooting hints and tips, articles from technicians, online courses, and frequently ask ed questions • Community — Online disc ussion with other Del.
12 Finding Information • How to reinstall my operating system Operating Sy stem CD NOTE: The Operating Sy stem CD may be optional and may not ship with your computer . The operating system is alread y installed on your computer . T o reinstall your operating system see "Restoring Y o ur Operating System" on page 56.
Setting Up and Using Y our Computer 13 Setting Up and Using Y our Computer Front and Back V iew of the Computer Front View NOTE: The front panel door d oes not close when you are using the Flash Media, IEEE 1394, USB, or headphone connectors.
14 Setting Up and Using Y our Computer 1 CD/D VD drive eject button P ress this button to eject a CD/DVD from the drive. 2 CD/D VD drive-activity light The drive activity light is on when the computer reads data from the CD or D VD drive.
Setting Up and Using Y our Computer 15 Back View 1 voltage selection switch See the safety instructions in the Pr o d u c t Information Guide for more information. 2 power connector Insert the power cable. 3 back panel connectors Plug IEEE 1394, USB and other devices into the appropriate connector .
16 Setting Up and Using Y our Computer Back I/O Connectors 12 4 10 3 5 6 7 11 12 13 14 9 8 1 link integrity light • Green — A good connection e xists between a 10-Mbps network and the computer . • Orange — A good connection exists between a 100-Mbps network and the computer .
Setting Up and Using Y our Computer 17 Setting Up a Printer NOTICE: Complete the operating sy stem setup before you connect a printer to the computer . See the documentation that came with the p rinter for setup informat ion, including how to: • Obtain and install updated drivers.
18 Setting Up and Using Y our Computer Connecting a USB Printer NOTE: Y ou can connect USB devices wh ile the computer is turned on. 1 Complete the operating system setup, if you have not already done so . 2 Install the printer driver if necessary . See th e documentation that came with your printer .
Setting Up and Using Y our Computer 19 • MultiMediaCard (MMC) • Reduced size MMC • Memory Stick (MS/MS P ro/Duo Pro) F or information on installing a Media Card Reader , see "Installing a Media Card Reader" on page 87. T o use the Media Card Reader: 1 Check the media or card to determine the proper orientation for insertion.
20 Setting Up and Using Y our Computer Connecting a TV (Optional) NOTE: T o connect a TV to your computer , you must have a vid eo card that has TV-out func tionality and an S-video cable, which is available at most consumer electronics stores. An S-video cable is not included with your computer .
Setting Up and Using Y our Computer 21 Network Setup Wizard The Microsoft ® W indows ® XP operating system provides a Networ k Setup W izard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office.
22 Setting Up and Using Y our Computer Connecting to the Internet NOTE: ISPs and ISP offerings vary by country . T o connect to the Internet, you need a modem or netwo rk connection and an Internet service provider (ISP), such as AOL or MSN.
Setting Up and Using Y our Computer 23 6 Click the appropriate option under How do you want to co nnect to the Internet? , and then click Next . NOTE: If you do not know which type of conn ection to select, contact your ISP . 7 Use the setup information provided by your ISP to complete the setup.
24 Setting Up and Using Y our Computer T o format CDs for storing data, to create music CDs, or to copy CDs, see the CD software that came with your computer .
Setting Up and Using Y our Computer 25 Adjusting the V olume NOTE: When the speakers are muted, you do not hear the CD or DVD playing. 1 Click the Start button, point to All P rograms → Accessories → Entertainment , and then click V olume Control .
26 Setting Up and Using Y our Computer 1 Click the Start button, point to All P rograms → Rox io → Creator P rojects , and then click RecordNow Copy . 2 Under the Copy tab, click Disc Copy . 3 T o copy the CD or DVD: • If you have one CD/DVD drive , ensure that the settings ar e correct and click the Disc Copy button.
Setting Up and Using Y our Computer 27 DVD-Writable Drives Helpful T ips • Use Microsoft ® W indows ® Explorer to drag and drop files to a CD-R or CD-R W only after you start Roxio Creator Plus and open a Cr eator project. • Use CD-Rs to burn music CDs that you want to play in regular ster eos.
28 Setting Up and Using Y our Computer Power Management The Microsoft ® W indows ® XP power management features can r e duce the amount of electricity your computer uses when it is on and you are not using it .
Setting Up and Using Y our Computer 29 Because hibernate mode requir es a special file on yo ur hard drive with enough disk space to store the contents of the computer memory , Dell creates an appropriately sized hibernate mode file before shipping the computer to you.
30 Setting Up and Using Y our Computer Advanced T ab The Advanced tab allows you to: • Place the power options icon in the W indows taskbar for quick access. • Set the computer to prompt you for your W indows password befor e the computer exits from standby mode or hibernate mode.
Setting Up and Using Y our Computer 31 Enabling the QRT Feature in Sy stem Setup The QR T drivers must be installed before this feature becomes active . These drivers ar e installed when this option is order ed. Also, Quick Resume is ena bled in system setup when this featur e is ordered.
32 Setting Up and Using Y our Computer T o determine if your computer is using Hyper - Threading technology : 1 Click the Start button, right-click My Computer , and then click P roperties . 2 Click Hardware , then click Device Manager . 3 In the Device Manager window , click the plus (+) sign n ext to P rocessors .
Solving Problems 33 Solving Problems T roubleshooting T ips F ollow these tips when you tr oubleshoot your computer: • If you added or removed a part befor e the proble m started, review the installation procedures and ensure that the part is corr ectly installed.
34 Solving Problems Drive Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . CD and DVD drive problems NOTE: High-speed CD or DVD drive vibrati on is normal and may cause noise, which does not i ndicate a defect in the drive or the CD or DVD.
Solving Problems 35 Problems writing to a CD/DVD-RW drive Hard drive problems E-Mail, Modem, and Internet Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
36 Solving Problems C HECK THE TELEPHONE LINE CONNECTION — C HECK THE TELEPHONE JACK — C ONNECT THE MODEM DIRECTLY TO THE TELEPHONE WALL JACK — U SE A DIFFERENT TELEPHONE LINE — • V erify that the telephone line is connected to the jack on the modem (the jack has either a green label or a connector -shaped icon next to it).
Solving Problems 37 Error Messages CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . If the error message is not listed , see the documentation for the opera ting system or the program that was running when the message appeared.
38 Solving Problems Media Card Reader Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Solving Problems 39 Keyboard Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
40 Solving Problems A program stops responding A program crashes repeatedly NOTE: Most software includes install ation instructions in its documentati on or on a floppy disk or CD.
Solving Problems 41 Other software problems Memory Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
42 Solving Problems Mouse Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Solving Problems 43 Network Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . Power Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
44 Solving Problems Printer Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: If you need technical assistan ce for your printer , contact the printer’ s manufacturer .
Solving Problems 45 Scanner Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: If you need technical assistan ce for your scan ner , contact the scanner’ s manufacturer .
46 Solving Problems Sound and Speaker Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . No sound from speakers NOTE: The volume control in MP3 and o ther media players may override the Windows volume setting.
Solving Problems 47 No sound from headphones V ideo and Monitor Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: See the monitor documentation for troubleshooting procedures.
48 Solving Problems The screen is difficult to read T EST THE ELECTRICAL OUTLET — Ensure that the electrical outlet is working by testing it with another device, such as a lamp. C HECK THE DIAGNOSTIC LIGHTS — See "Diagnostic Lights" on page 49.
T roubleshooting T ools 49 T roubleshooting T ools Diagnostic Lights CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide .
50 T roubl eshooting T ools A possible graphics card failur e has occurred. • Reseat any installed graphics cards (see "Cards" on page 70).
T roubleshooting T ools 51 A possible expansion car d failure has occurred. 1 Determine if a conflict exists by removing an e xpansion card (not a graphics card) and r estarting the computer (see "Cards" on page 70). 2 If the problem persists, reinstall the card that you r e moved, then remove a different car d and restart the computer .
52 T roubl eshooting T ools Dell Diagnostics CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
T roubleshooting T ools 53 Dell Diagnostics Main Menu The following tests can be r un from the Dell Diagnostics Main Menu : F or any problem encountered during a test, a message a ppears with an error code and a description of the problem.
54 T roubl eshooting T ools Drivers What Is a Driver? A driver is a program that controls a device such as a printer , mouse, or keyboar d. All devices require a driver program. A driver acts like a translator between the device and any other programs that use the device.
T roubleshooting T ools 55 Reinstalling Drivers NOTICE: The Dell Support website at support.dell.com provides approved drivers for your Dell™ computer .
56 T roubl eshooting T ools If Device Driver Rollback and manua lly reinstalling the driver do not resolve the problem, use System Restore to r eturn your computer to the operating state that existed before you installed the new driver (see "Using Microsoft W indows XP System Restore" on page 56).
T roubleshooting T ools 57 Restoring the Computer to an Earlier Operating State NOTICE: Before you restore the computer to an earlier operating state, save and close any open files and exit any open programs. Do not alter , open, or delete any files or programs until the sy stem restoration process is complete.
58 T roubl eshooting T ools Enabling Sy stem Restore If you reinstall W indows XP with less than 200 MB of fr ee hard-disk space available, System Restore is automatically disabled. T o determine if System Restore is enabled: 1 Click Start , then click Control Pa n e l .
T roubleshooting T ools 59 7 Click Next . The System Restore screen appears and the computer r estarts. 8 After the computer restarts, click OK . Removing Dell PC Restore NOTICE: Removing Dell PC Restore from the hard drive perma nently deletes the PC Restore utility from your computer .
60 T roubl eshooting T ools.
Removing and Installing Parts 61 Removing and Installing Parts Before Y ou Begin This chapter provides procedures for r emoving and installing the components in your computer .
62 Removing and Installing Parts Before W orking Inside Y our Computer Use the following safety guidelines to help protec t your computer from potential damage and to help ensure your own personal safety . CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Removing and Installing Parts 63 3 Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board. CAUTION: T o guard against electrical shock, alway s unplug your computer from the electrical outlet before opening the cover .
64 Removing and Installing Parts Inside V iew of Y our Computer CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electrical shock, alway s unplug your computer from the electrical outlet before opening the cover .
Removing and Installing Parts 65 Sy stem Board Components 2 4 3 5 28 10 13 16 18 27 11 9 15 14 1 29 24 25 23 22 21 20 12 6 19 7 8 26 17 30.
66 Removing and Installing Parts Memory Y ou can increase your computer memory by ins talling memory modules on the system boar d. Y our computer supports unbuffered, non-ECC, DDR2 memory .
Removing and Installing Parts 67 The r ecommended memory configurations are: • A pair of matched memory modules installed in DIMM connectors 1 and 2 (white securing clips) or • A pair of matched m.
68 Removing and Installing Parts Addressing Memory With 4-GB Configurations Y our computer supports a maximum of 4 GB of memory when you use two 2-GB DIMMs.
Removing and Installing Parts 69 5 Align the notch on the bottom of the mo dule with the crossbar in the connector . NOTICE: T o avoid damage to the memory module, press the modul e straight down into th e connector while you apply equal force to ea ch end of the module.
70 Removing and Installing Parts Removing Memory CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Removing and Installing Parts 71 If you are installing or r eplacing a PCI Express car d, fo llow the procedures in the next section. If you ar e removing but not r eplacing a card, see "R emoving a PCI Express Card" on page 74. If you are r eplacing a card, r emove the current driver for the card from the operating system.
72 Removing and Installing Parts 5 P repare the car d for installation. See the documentation that came with the card fo r information on configuring the car d, making internal connections, or otherwise customizing it for your computer . CAUTION: Some network adapters automatically start the computer when the y are connected to a network.
Removing and Installing Parts 73 10 Close the card r etention door by snapping it into place. NOTICE: Do not route card cables over or behind the cards. Ca bles routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.
74 Removing and Installing Parts Removing a PCI Express Card 1 F ollow the procedures in "Befor e Y ou Begin" on page 61. 2 If necessary , disconnect any cables connected to the card. 3 Gently pull back the securing tab, grasp the card by it s top corners, and then ease it out of its connector .
Removing and Installing Parts 75 Connecting Drive Cables When you install a drive, you connect two cables—a DC power cable and a data cable—or a single interface cable to the back of t he drive and to the system boar d.
76 Removing and Installing Parts Connecting and Disconnecting Drive Cables When connecting and disconnecting a serial A T A data cable , hold the cable by the black connector at each end.
Removing and Installing Parts 77 NOTICE: Do not pull the drive out of the computer by the dr ive cables. Doing so may cause damage to cables and the cable connectors. 3 Lift the drive out of the computer and disconnec t the power and hard-drive cables from the drive.
78 Removing and Installing Parts Installing a Hard Drive 1 Unpack the replacement har d drive, and prepare it for installation. 2 Check the documentation for the drive to verify that it is configured for your computer .
Removing and Installing Parts 79 3 Connect the power cable and hard-dri ve or SA T A cable to the drive. 4 Check all connectors to be certain that th ey are properly cabled and firmly seated. 5 Gently slide the drive into the open bay until the ha rd drive plastic latch att aches to the har d drive holder on the chassis.
80 Removing and Installing Parts 6 Align the drive screw holes with the scr ews projecting up on the heat sink holder . 7 F irmly press on the blue tab on each side of the drive until you hear a click. 8 Replace the computer cover ("Replac ing the Computer Cover" on page 96).
Removing and Installing Parts 81 CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the sa fety instructions in the Product Information Guide . CAUTION: T o guard against electrical shock, alway s unplug your computer from the electrical outlet before removing the computer cover .
82 Removing and Installing Parts 5 Disconnect the data cable from the system board connector . 6 Disconnect the power cable and data cable from the back of the drive.
Removing and Installing Parts 83 Installing a CD/DVD Drive 1 Unpack the drive and prepar e it for installation. Check the documentation that accompanied the drive to verify that the drive is configured for your computer . 2 Connect the power and data cables to the drive.
84 Removing and Installing Parts 4 Gently position the drive until it clicks into place. 5 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 6 Replace the computer cover (see "Repl acing the Computer Cover" on page 96).
Removing and Installing Parts 85 Media Card Reader F or information about using the Media Card Reader , see "Using a Media Card Reader (Optional)" on page 18. CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
86 Removing and Installing Parts 5 P u ll up on the drive release latch and slide the Me dia Car d Reader towards the back of the computer , then lift to remove the drive from the computer .
Removing and Installing Parts 87 Installing a Media Card Reader 1 F ollow the procedures in "Befor e Y ou Begin" on page 61. 2 Remove the Media Card Reader from its packaging. 3 Slide the drive into place until you hear a c lick or feel the drive securely installed.
88 Removing and Installing Parts 4 Connect the interface cable to the back of the Me dia Card Reader and to the Media Car d Reader connector on the system board. 5 Replace the CD/D VD drive (see "Installing a CD/DVD Drive" on page 83). 6 Replace the hard drive (see "Instal ling a Har d Drive" on page 78).
Removing and Installing Parts 89 Floppy Drive (Optional) CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electrical shock, alway s unplug your computer from the electrical outlet before removing the cover .
90 Removing and Installing Parts 5 Disconnect the interface cable from the system board (see "System Boar d Components" on page 65). NOTE: The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
Removing and Installing Parts 91 Installing a Floppy Drive NOTE: The interface cable is held in place by the metal dr ive bracket and does not need to be removed from the drive. 1 F ollow the procedures in "Befor e Y ou Begin" on page 61. 2 Gently slide the drive into place until you hear a click or feel the drive securely installed.
92 Removing and Installing Parts 3 Attach the interface cable to the system boar d (see "System Boar d Components" on page 65). 4 Check all cable connections, and fold cables out of th e way to provide airflow fo r the fan and cooling vents.
Removing and Installing Parts 93 Modem CAUTION: Before you begin any of the procedures in this section, follow the sa fety instructions in the Product Information Guide . NOTICE: Before you remove or install the mo dem, make sure to d isconnect all telephone an d network cables from your computer .
94 Removing and Installing Parts 2 Remove the existing modem: a Remove the modem cable from the RJ11 internal connector . b Use a small Phillips screwdriver to r emove the two screws securing the modem to the system board, and set the scr ews aside.
Removing and Installing Parts 95 3 Remove the computer cover (see "Remov ing the Computer Cover" on page 62). 4 Locate the battery socket (see "System Board Components" on page 65). NOTICE: If you pry the battery out of its so cket with a blunt object, be careful not to touch the sy stem board with the object.
96 Removing and Installing Parts Replacing the Computer Cover CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . 1 Ensure that all cables ar e connect ed, and fold cables out of the way .
Specifications 97 Specifications Processor P rocessor types Intel ® P entium ® 4, P entium ® D, Celeron ® D, Intel Core™ processor Level 2 (L2) cache 1 MB for P entium 4 5XX processors (with Hyp.
98 Specifications Vide o T ype integrated Intel Graphics Medi a Accelerator X3000 or PCI Expr ess x16 graphics expansion slot Audio T ype Internal 7.1 channel Intel High Definition Audio (Sigmatel ST .
Specifications 99 USB 10-pin header for optional Media Card Reader (3.5 inch bay device) and two front-panel and six ba ck-panel USB 2.0–compliant connectors NOTE: The 10-pin header connector used for the optional Media Card Reader is popu la ted with only nine pins for keying purposes.
100 Specifications Controls and Lights P ower control push button P ower light green light — Blinking gr een in sleep state; solid green for power -on state. amber light — Blinking amber indica tes a problem with an installed device; solid amber indicates an in ternal power problem (see "P ower P r oblems" on page 43).
Specifications 101 Sy stem Setup Overview Use system setup as follows: • T o change the system configuration information after yo u add, change, or remove any hardwar e in your computer • T o set .
102 Specifications Entering Sy stem Setup 1 T urn on (or restart) your computer . 2 When the DELL logo appears, press <F2> immediately . NOTE: Keyboard failure may result when a key on the ke yboard is held down for exte nded periods of time.
Specifications 103 Sy stem Setup Options NOTE: Depending on your comp uter , BIOS version, and ins talled devices, the items listed in this section may not appear , or may not appea r exactly as listed.
104 Specifications USB Controller Set to On (default) so that USB devices will be detected and supported in the operating system. The No Boot option enables a USB controller , but it does not recognize a USB storage device.
Specifications 105 Admin Password This option provides restricted access to the computer's system setup in the same way that access to the co mputer can be restricted with the System Pa s s w o r d option. NOTE: T o delete a password, enter the old password and press <Enter> two times.
106 Specifications Boot Sequence This feature allows you to chan ge the boot sequence for devices. NOTICE: If you modify any boot sequence settings, save the new se ttings to avoid losing the changes. Option Settings • Diskette Drive — T he computer attempts to boot from the floppy drive.
Specifications 107 4 At the Boot Device Menu , use the up- and down-arrow keys or pr ess the appropriate number on the keyboar d to highlight the device that is to be used for the current boot only , and then press <Enter>. F or example, if you ar e booting to a USB memory key , highlight USB Flash Device and press <Enter>.
108 Specifications Clearing Forgotten Passwords CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . NOTICE: This process erases both the sy s tem and administrator passwords.
Specifications 109 NOTE: In you sy stem setup (see "Sy stem Setup" on pa ge 101), both sy stem and administrator password options appear as Not Set . The password feature is enabled but a passw ord is not assigned. 13 Assign a new system and/or admini strator password, as needed.
110 Specifications • T o clean your monitor screen, lightly dampen a soft, clean cloth with water . If possible, use a special screen-cleaning tissue or solution suitab le for the monitor’s antistatic coating.
Specifications 111 Dell provides limited technical support for t he computer and any "Dell-installed" software and peripherals 1 . Support for third-party softwar e and peripherals is provid.
112 Specifications These limits are designed to provide r easonable pr otection against harmful int erference in a residential installation. However , there is no guarantee that int erfer ence will not occur in a particular installation.
Specifications 113 Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and T oll-Free Numbers Anguilla W ebsite: www .dell.com.ai E-mail: la-techsupport@dell.
114 Specifications Austria International Access Code: 900 We b s i t e : support.euro.dell.com E-mail: tech_support_central_europe@dell.com Home/Small Business Sales 0820 240 530 00 Home/Small Busines.
Specifications 115 Brazil International Access Code: 00 Country Code: 55 City Code: 51 W ebsite: www .dell.com/br E-mail: BR- T echSupport@dell.com Customer Care and T ech Support 0800 90 3355 T echni.
116 Specifications Chile (Santiago) Country Code: 56 City Code: 2 We b s i t e : www .dell.com/cl E-mail: la-techsupport@dell.com Sales and Customer Support toll-free: 1230-020-4823 T echnical Support.
Specifications 117 Colombia W ebsite: www .dell.com/cl E-mail: la-techsupport@dell.com T echnical Support toll-free: 1-800-915-5704 Costa Rica W ebsite: www .dell.com/cr E-mail: la-techsupport@dell.com T echnical Support toll-free: 800-012-0232 Czech Republic (P rague) International Access Code: 00 Country Code: 420 W ebsite: support.
118 Specifications Ecuador We b s i t e : www .dell.com/ec E-mail: la-techsupport@dell.com General Support (calling from Quito) toll-free: 999-119-877-655-3355 General Support (calling from Guayaquil) toll-free: 1800-999-119-877-655- 3355 El Salvador We b s i t e : www .
Specifications 119 F rance (P aris) (Montpellier) International Access Code: 00 Country Code: 33 City Codes: (1) (4) W ebsite: support.euro.dell.com Home and Small Business T echnical Support for XPS .
120 Specifications Greece International Access Code: 00 Country Code: 30 We b s i t e : support.euro.dell.com T echnical Support 00800-44 14 95 18 Gold Service T echnical Support 00800-44 14 00 83 Switchboard 2108129810 Gold Service Switchboard 2108129811 Sales 2108129800 Fa x 2108129812 Grenada E-mail: la-techsupport@dell.
Specifications 121 India E-mail: india_support_desktop@dell.com india_support_notebook@dell.com india_support_Server@dell.com T echnical Support 1600338045 and 1600448046 Sales (Large Corporate Accoun.
122 Specifications Italy (Milan) International Access Code: 00 Country Code: 39 City Code: 02 We b s i t e : support.euro.dell.com Home and Small Business T echnical Support 02 577 826 90 Customer Car.
Specifications 123 Japan (Kawasaki) International Access Code: 001 Country Code: 81 City Code: 44 W ebsite: support.jp.dell.com T echnical Support (servers) toll-free: 0120-198-498 T echnical Support .
124 Specifications Latin America Customer T echnical Support (Austin, T exas, U.S.A.) 512 728-4093 Customer Service (Austin, T exas, U.S.A.) 512 728-3619 F ax (T echnical Support and Customer Service) (Austin, T exas, U.S.A.) 512 728-3883 Sales (Austin, T exas, U.
Specifications 125 Mexico International Access Code: 00 Country Code: 52 E-mail: la-techsupport@dell.com T echnical Support (T elMex) toll-free: 1-866-563-4425 Sales 50-81-8800 or 01-800-888-3355 Customer Service 001-877-384-8979 or 001-877-269-3383 Main 50-81-8800 or 01-800-888-3355 Montserrat E-mail: la-techsupport@dell.
126 Specifications Norway (L ysaker) International Access Code: 00 Country Code: 47 We b s i t e : support.euro.dell.com T echnical Support for XPS 815 35 043 T echnical Support for all other Dell pro.
Specifications 127 St. Lucia W ebsite: www .dell.com/lc E-mail: la-techsupport@dell.com T echnical Support toll-free: 1-866-464-4352 St. V incent and the Grenadines W ebsite: www .
128 Specifications South Africa (Johannesburg) International Access Code: 09/091 Country Code: 27 City Code: 11 We b s i t e : support.euro.dell.com E-mail: dell_za_support@dell.
Specifications 129 Switzerland (Geneva) International Access Code: 00 Country Code: 41 City Code: 22 W ebsite: support.euro.dell.com E-mail: T ech_support_central_Europe@dell.
130 Specifications T urks and Caicos Islands We b s i t e : www .dell.com/tc E-mail: la-techsupport@dell.com General Support toll-free: 1-877-441-4735 U.K. (Bracknell) International Access Code: 00 Country Code: 44 City Code: 1344 We b s i t e : support.
Specifications 131 U.S.A. (Austin, T exas) International Access Code: 011 Country Code: 1 Automated Or der-Status Service toll-free: 1-800-433-9014 AutoT ech (portable and desktop computers) toll-free.
132 Specifications U.S. V irgin Islands E-mail: la-techsupport@dell.com T echnical Support toll-free: 1-877-702-4360 V enezuela We b s i t e : www .dell.
Index 133 Index A audio . See sound B battery problems, 3 3 replacing, 9 4 BIOS, 101 boot sequence, 106 c h a n g i n g , 106-107 option settings, 1 0 6 booting to a USB device, 1 0 6 C car ds install.
134 Index 134 Index End User License Agreement, 9 ergonomics information, 9 error messages diagnostic lights, 4 9 F floppy drive installing, 9 1 removing, 8 9 H hard drive installing, 7 8 problems, 3 .
Index 135 O operating system reinstalling, 1 2 restoring, 5 6 Operating System CD, 12 P passwor d clearing, 1 0 8 jumper , 1 0 8 PC Restore, 56 PCI Express car ds installing, 7 1 removing, 7 4 playing.
136 Index 136 Index sound problems, 4 6 volume, 4 6 speaker problems, 4 6 volume, 4 6 specifications audio, 9 8 computer information, 9 7 connectors, 9 8 controls and lights, 1 0 0 drives, 9 8 environ.
An important point after buying a device Dell XPS 210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell XPS 210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell XPS 210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell XPS 210 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell XPS 210 will certainly help you make a decision on the purchase.
If you already are a holder of Dell XPS 210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell XPS 210.
However, one of the most important roles played by the user manual is to help in solving problems with Dell XPS 210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell XPS 210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
