Instruction/ maintenance manual of the product IN1920F Dell
Go to page of 31
Dell™IN1720/IN1920FlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™IN1720/IN1920FlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts and .
Product Features The Dell™IN1720/IN1920 flat panel display has an active matrix, Thin - film Transistor, Liquid Crystal Display. The monitors features include: ■ IN1720: 17 - inch (433.0 mm) viewable area display. 1440x900 resolution, plus full - screen support for lower resolutions.
Side View Bottom View Label Description Use 1 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 2 Regulatory rating label List the regulatory approvals. 3 VESA mounting holes (100mm) T o mount the monitor.
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Video input signals Analog RGB: 0.7 Volts +/ - 5%, 75 ohm input impedance Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free TTL level, SOG (Composite SYNC on green) AC input voltage / frequency / current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.
Back to Contents Page.
Back to Contents Page Appendix Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™IN1720/IN1920FlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com ,enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ IN1720/IN1920 Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Front panel Key Use the keys onthefrontofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Accessing the Menu System Exit Use the Exit key to exit on - screen display (OSD) from menu and sub - menus.
The table below provides a list of all the OSD menu options and their functions. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again.
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
l Standard : Loads the monitor's default color settings. This is the default preset mode. l Multimedia : Loads color settings ideal for multimedia applications. l Game : Loads color settings ideal for most gaming applications. l Warm : Increase the color temperature.
DISPLAY SETTINGS Use the Displays Settings menu to adjust the monitor's display settings. Back Press to go back to the main menu . Horizontal Position Press to go back to the main menu. Horizontal Position Use the or buttons to adjust image left and right.
Back Language Press to go back to the main menu. Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Japanese, Brazilian Portuguese, Simplified Chinese or Russian Menu Transparency Allows you to adjust the OSD background from opaque to transparent.
OSD Messages Factory Reset ResetsallOSDsettingstothefactorypresetvalues . Personalize Allows you to adjust shortcut key for: 1. Preset modes, 2. Brightness / Contrast, 3. Auto Adjust. Back Press to go back to the main menu.
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920).
The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a LED for power indication, and two audio headset jacks. Using the Tilt Tilt With the stand assembly, you can tilt the monitor for the most comfortable viewing angle.
Back to Contents Page Setting Up Your Monitor Dell™ IN1720/IN1920 Flat Panel Monitor Setting the display resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920) ( Maximum) For optimal di.
Dell™ IN1720/IN1920 FlatPanelMonitor Information in this document is subject to change without notice. © 2010 DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide Attaching the Stand Connecting Your Monitor Removing the Stand Base .
Removing the Stand Base CAUTION: The graphics are used for the purpose of illustration only. Appearance on the computer may vary. IN1720: IN1920: .
Attaching the Dell Soundbar(for IN1920 only) To attach the soundbar: Removing the Stand for VESA Wall Mount IN1720: IN1920: To remove stand base from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Press and hold the release latch, while pulling the stand base away from the monitor.
Back to Contents Page To remove the stand assembly from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Remove the three screws on the stand of the monitor as shown above. 3. Remove the stand assembly from the monitor.
Back to Contents Page Troubleshooting Dell™ IN1720/IN1920 Flat Panel Monitor Self - Test Common Problems Product Specific Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds.
Product Specific Problems Back to Contents Page Wrong Color Picture color not good l Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. l Try different Color Preset Settings in Color Settings OSD.
An important point after buying a device Dell IN1920F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell IN1920F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell IN1920F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell IN1920F you will learn all the available features of the product, as well as information on its operation. The information that you get Dell IN1920F will certainly help you make a decision on the purchase.
If you already are a holder of Dell IN1920F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell IN1920F.
However, one of the most important roles played by the user manual is to help in solving problems with Dell IN1920F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell IN1920F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
