Instruction/ maintenance manual of the product 78-8135-4353-1-A 3M
Go to page of 8
J anuary 2006 78-8135-4353-1-A Better Buried Closures Instructions.
2 Contents: 1.0 General ......................................................................................................................................................... 3 2.0 Kit Contents ......................................................
3 1.0 General 1.1 The 3M ™ Better Buried Closures are rigid body splice closures designed for direct burial. When filled with a reenterable encapsulating compound, the closure can be reentered for splice re work.
4 Connector 2" x 12" 2" x 24" 3"x 24" 4" x 24" 5" x 26" 6 x 26" 7 x 26" 9 x 26" 50 x 305mm 50 x 610mm 76 x 610mm 102 x 610mm 127 x 660mm 152 x 660mm 178 x 660mm 229 x 660mm 3M ™ MS 2™ 50 pair 100 pair 200 pair 400 pair 600 pair 900 pair 1200 pair 2400 pair Splicing Module 0.
5 4.0 LHS End Cap Installation 4.1 End Cap Installation on Cut Cables Procedur e: a. Select desired port(s). b . Cut of f cone(s) as close as possible to the diameter of the cable using the cut guides on either side of the cone(s). See cable diameter tape on back cov er .
6 e. Splice conductors per standard procedure. f. T o insure thorough encapsulation of conductors, do not tightly bind the splice bundle. g. Install second bond bar if required. h. Remov e vinyl tape from scuf fed sheaths. Keep these areas clean during the following bonding and sealing collar construction operations.
7 6.0 Closur e Assembly Note: Mak e sure all vinyl tape has been removed from splice encapsulation area. 6.1 Center lo wer closure half on splice bundle and attach upper half (upper half has fill ports) mating the tongue and groov e. 7.0 Closur e Reentry 7.
Important Notice All statements, technical information, and recommendations related to 3M’ s products are based on information believ ed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must ev aluate it and deter mine if it is suitable f or your intended application.
An important point after buying a device 3M 78-8135-4353-1-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 78-8135-4353-1-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 78-8135-4353-1-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 78-8135-4353-1-A you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 78-8135-4353-1-A will certainly help you make a decision on the purchase.
If you already are a holder of 3M 78-8135-4353-1-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 78-8135-4353-1-A.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 78-8135-4353-1-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 78-8135-4353-1-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
