Instruction/ maintenance manual of the product 780 Dell
Go to page of 73
Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual Working on Your Computer Removing and Replacing Parts Specifications System Board Layout System Setup Diagnostics Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.
Back to Contents Page Working on Your Computer Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual Before Working Inside Your Computer Recommended Tools Turning Off Your Computer After Wo.
Small flat - blade screwdriver Phillips screwdriver Small plastic scribe Flash BIOS update program media Turning Off Your Computer CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
Back to Contents Page Removing and Replacing Parts Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual Cover Drive Cage Optical Drive Wireless Local Area Network (WLAN) Card System Fan He.
Back to Contents Page Specifications Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start ® Help and Support and select the option to view information about your computer.
Drives Externally accessible slimline drive bays one bay for SATA DVD- ROM / DVD+/– RW Internally accessible 2.5 - inch drive bays one External Connectors Audio back panel two connectors: line - out.
Height 23.7 cm (9.3 inches) Width 6.5 cm (2.6 inches) Depth 24.0 cm (9.4 inches) Weight 3.2 kg (7 lb) Environmental Temperature Operating 10 °C to 35 °C (50 °F to 95 °F) Storage –40 °C to 65 °C (–40 °F to 149 °F) Relative humidity (noncondensing) operating: 20% to 80% storage: 5% to 95% Maximum vibration Operating 5–350 Hz at 0.
Back to Contents Page System Board Layout Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
Back to Contents Page System Setup Dell™ OptiPlex™ 760 Ultra Small Form Factor—Service Manual Overview System Setup Options Booting to a USB Device Password Protection Clearing Forgotten Passwor.
Use the Tab and Up/Down arrow keys on your keyboard to navigate or click to navigate using the mouse. System Setup Options NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.
Disable AT PS/2 (default) EPP ECP No DMA ECP DMA 1 ECP DMA 3 Parallel Port Address Sets the base I/O address of the integrated parallel port. Serial Port #1 Identifies and defines the serial port settings.
password to be assigned and verified. This option is not set by default. Password Changes Enables or disables the user from changing the system password without the administrative password. This option is enabled by default. TPM Security Enables or disables the trusted platform module (TPM) security.
Sets the power management suspend mode to: S1 S3 (default) NOTE: If the AMT Management Engine (ME) of the system is disabled , the S1 suspend mode is unavailable in the system setup. Fan Control Override Controls the speed of the system fan. NOTE: When enabled, the fan runs at full speed.
Post Behavior Fast Boot When enabled (default), your computer starts more quickly because it skips certain configurations and tests. NumLock LED Enables or disables the NumLock feature when your computer starts. When enabled (default), this option activates the numeric and mathematical features shown at the top of each key.
Changing the Boot Sequence for Future Boots 1 . Enter System Setup (see Entering System Setup ). 2 . Click to expand SystemBoard and then click Boot Sequence . 3 . Highlight the appropriate device from the list of devices on the right and then click the up or down arrows to move the item you want to change.
You can only assign a system password when the following option is displayed: Not Set — No system password is assigned and the password jumper on the system board is in the enabled position (the default setting).
computer, and then repeat steps 3 and 4. 5 . To assign a new password, follow the procedure in Assigning a System Password . 6 . Exit system setup. Administrator Password Option Settings You cannot change or enter a new administrator password if either of the following two options is displayed: Set — An administrator password is assigned.
To change an existing administrator password, you must know the administrator password. 1 . Enter system setup (see Entering System Setup ). 2 . Type the administrator password at the prompt. 3 . Highlight Admin Password and press the left - or right - arrow key to delete the existing administrator password.
1 . Follow the procedures in Working on Your Computer . 2 . Remove the computer cover. 3 . Locate the 2 - pin password jumper (PSWD) on the system board, and remove the jumper to clear the password. See Password Protection . 4 . Replace the computer cover .
.
Back to Contents Page Diagnostics Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual Dell Diagnostics Power Button Light Codes Beep Codes Diagnostic Lights Dell Diagnostics When to Use the Dell Diagnostics It is recommended that you print these procedures before you begin.
6 . Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer. 7 . When the Dell Diagnostics Main Menu appears, select the test you want to run. Dell Diagnostics Main Menu 1 .
Amber Second state of the light at power up. Indicates the POWER_GOOD signal is active and it is probable that the power supply is fine. Look at the diagnostic lights for further information. Blinking Green System is in a low power state, either S1 or S3.
4-4- 2 Failure to decompress code to shadowed memory 4-4- 3 Math- coprocessor test failure 4-4- 4 Cache test failure Diagnostic Lights To help troubleshoot a problem, your computer has four lights labeled 1, 2, 3, and 4 on the bank panel. When the computer starts normally, the lights flash before turning off.
Repeat this process for each expansion card installed. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts. If the problem persists, contact Dell. Another failure has occurred. Ensure that all hard drive and optical drive cables are properly connected to the system board .
Back to Contents Page Cover Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
Replacing the Cover To replace the cover, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Cover Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
Replacing the Cover To replace the cover, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Drive Cage Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
5 . Disconnect the power and data cables from the optical drive. 6 . Flip over the drive cage and place it on the computer..
7 . Disconnect the power and data cables from the hard drive. 8 . Remove the drive cage from the computer..
Replacing the Drive Cage To replace the drive cage, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Optical Drive Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Remove the optical - drive bracket from the optical - drive assembly. Replacing the Optical Drive To replace the optical drive, perform the above steps in reverse order.
Back to Contents Page Wireless Local Area Network (WLAN) Card Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Push the levers that secure the WLAN card to the computer away from the WLAN card. 7 . Remove the WLAN card from the connector on the system board.
Replacing the WLAN Card To replace the WLAN card, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page System Fan Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Release the fan cable from its routing on the computer. 7 . Remove the screws that secure the fan to the computer chassis..
8 . Remove the system fan from the computer. Replacing the System Fan To replace the system fan, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Heat Sink and Processor Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Loosen the captive screws on the heat sink. 7 . Lift the heat sink out of the computer..
8 . Press the release lever down and out to release the processor cover. 9 . Open the processor cover..
10 . Remove the processor from the system board. Replacing the Heat Sink and Processor To replace the heat sink and processor, perform the above steps in reverse order.
Back to Contents Page Intrusion Switch Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Slide the chassis intrusion switch out of its slot in the metal bracket, and then push it down through the square hole in the bracket to remove the switch and its attached cable from the computer. Replacing the Intrusion Switch To replace the intrusion switch, perform the above steps in reverse order.
Back to Contents Page Coin - Cell Battery Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
9 . Lift the coin - cell battery up and remove it from the system board. Replacing the Coin- Cell Battery To replace the coin - cell battery, perform the above steps in reverse order.
Back to Contents Page System Board Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
12 . Disconnect the internal antenna cable. 13 . Remove the screws that secure the system board to the computer chassis..
14 . Remove the 7 mm hex screw from the system board. 15 . Remove the system board from the computer..
Replacing the System Board To replace the system board, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Front Bezel Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
4 . Rotate the front bezel away from the computer. 5 . Remove the front bezel from the computer. Replacing the Front Bezel To replace the front bezel, perform the above steps in reverse order.
Back to Contents Page Hard Drive Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Slide the hard drive out of the drive cage and remove the hard drive from the computer. Replacing the Hard Drive To replace the hard drive, perform the above steps in reverse order.
Back to Contents Page Control Panel Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Remove the cable from the routing guides on the computer chassis. 7 . Remove the screw that secures the control panel to the computer..
8 . Remove the control panel from the computer. Replacing the Control Panel To replace the control panel, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Internal Antenna Cable Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Remove the internal antenna cable from the routing guides on the computer chassis. 7 . Carefully release the internal antenna port from the computer chassis.
8 . Remove the internal antenna cable from the computer. Replacing the Internal Antenna Cable To replace the internal antenna cable, perform the above steps in reverse order.
Back to Contents Page Internal Speaker Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
7 . Push in on the release tab and rotate the speaker to release it from the computer chassis. 8 . Remove the speaker from the computer. Replacing the Internal Speaker To replace the internal speaker, perform the above steps in reverse order.
Back to Contents Page Memory Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Lift the memory module out of the connector and remove it from the computer. Replacing the Memory Module(s) To replace the memory, perform the above steps in reverse order.
Back to Contents Page I/O Panel Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
6 . Remove the screws that secure the I/O panel to the computer chassis. 7 . Remove the I/O board by pulling it away from the computer..
Replacing the I/O Panel To replace the I/O panel, perform the above steps in reverse order. Back to Contents Page.
Back to Contents Page Power Supply Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.
8 . Remove the screw that secures the power supply to the system board. 9 . Remove the screws that secure the power supply to the computer chassis..
10 . Slide the power supply towards the fan and remove it from the computer. Replacing the Power Supply To replace the power supply, perform the above steps in reverse order.
An important point after buying a device Dell 780 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 780 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 780 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 780 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 780 will certainly help you make a decision on the purchase.
If you already are a holder of Dell 780, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 780.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 780. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 780 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
