Instruction/ maintenance manual of the product 5150 Dell
Go to page of 74
Dell Inspiron 1100, 5100, and 5150 Service Manual Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Before You Begin System Components Memory, CD or DVD Drive, Modem, and Mini PCI Card Hard Driv.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Before You Begin Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Preparing to Work Inside the Computer.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual NOTE: Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the computer operating system, press and hold the power button for 4 seconds.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual 7. To avoid possible damage to the system board, wait 10 to 20 seconds and then disconnect any attached devices. 8. Disconnect all other external cables from the computer. 9. Remove any installed PC Cards from the PC Card slot.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 back 2 right 3 front 4 left Screw Identification When you are removing and replacing components, photocopy " Screw Identification " as a tool to lay out and keep track of the screws.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual Hard Drive Door: (2 each) Modem to System Board: (2 each) Optical Drive: (1 each) Keyboard to Computer Base: (4 each) Display Assemb.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual EMI Shield: (1 each) Top of Palm Rest to Computer Base: (2 each) Palm Rest to Base Plastics: (12 each) Video Card to System Board: (.
Before You Begin: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/beginb.
System Components: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page System Components Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
System Components: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 display 11 base plastics 2 display-feed flex cable 12 battery 3 hinge cover 13 CD or DVD drive 4 keyboard 14 left antenna (Inspir.
System Components: Dell Inspiron 1100, 5100, and 5150 Service Manual file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/systemb.htm (3 of 3) [2/28/2004 6:46:36 AM].
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Memory, CD or DVD Drive, Modem, and Mini PCI Card Dell™ Inspiron™ 1100, 5.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 captive screw 2 memory module cover 3. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 memory module 2 securing clips Installing the Memory Modules NOTE: If the memory module is not installed properly, the computer may not boot properly.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 5. Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 captive screw 2 memory module cover 4. Press the lever next to the memory module connectors in the direction of the arrow on the lever (towards the drive) to release the drive.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 lever 2 CD or DVD drive 3 M2.5 x 8-mm screw labeled "O" 5. Pull the drive out of the bay. Installing the CD or DVD Drive 1. Slide the new drive into the bay until the drive is fully seated.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual Modem Removing the Modem CAUTION: Before working inside your Dell™ computer, read the safety instructions in your Owner's Manual .
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 2 modem/Mini PCI card cover 3. Remove the two M2 x 3-mm screws securing the modem to the system board, and set them aside.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual NOTICE: The cable connectors are keyed for correct insertion; do not force the connections. 2. Align the modem with the screw holes, and press the modem into the connector on the system board.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 captive screw 2 modem/Mini PCI card cover 3. Disconnect the Mini PCI card from the attached cables. file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/upgrades.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 antenna cables 2 metal securing tabs (2) 3 Mini PCI card connector 4 Mini PCI card 4. Use your fingertips to carefully spread apart the securing taps on each end of the Mini PCI card connector until the card pops up.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual 1. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector until it clicks. 1 antenna cables 2 Mini PCI card connector 3 Mini PCI card 2.
Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1100, 5100, and 5150 Service Manual file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/upgrades.
Hard Drive: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Hard Drive Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Removing the Hard Drive CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
Hard Drive: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 M2.5 x 5-mm screws (2) 2 hard drive NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in your Owner's Manual .
Hard Drive: Dell Inspiron 1100, 5100, and 5150 Service Manual NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector. 2. Insert the drive into the bay, and push the hard drive until it is fully seated in the bay.
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Keyboard Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Removing the Keyboard CAUTION: Before working inside your Dell™ computer, read the safety instructions in your Owner's Manual .
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 notched edge 2 hinge cover 3. Lift the hinge cover up and away from the hinges and computer base. 4. Remove the four M2 x 3-mm keyboard screws. file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/keyboard.
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 M2 x 3-mm screws (4) 2 keyboard NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace.
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 keyboard connector 2 interface connector 7. Remove the keyboard from the computer base. Installing the Keyboard NOTICE: To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector on the system board, and do not reverse the keyboard connector.
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 securing tabs (4) 2 keyboard connector 3 interface connector 4 M2 x 3-mm screws (4) 2. Insert the four securing tabs on the keyboard into their respective slots in the palm rest, and lower the keyboard into the computer base.
Keyboard: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/keyboard.htm (6 of 6) [2/28/2004 6:46:39 AM].
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Display Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Display Assembly Display Bezel Display Panel Display Latch Assembly Display Assembly CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 7. Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position. 8. Remove the two M2.5 x 5-mm screws from each hinge bracket.
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 4 computer base 9. Pull straight up on the pull-tab that is attached to the display-feed flex cable to disconnect the cable from the system board. 10. Lift the display assembly up and out of the computer base.
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 screw covers (2) display bumpers (3) 2 M2.5 x 5-mm screws (5) 3 display bezel 4 display panel 5 M2 x 3-mm screws (8) file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/display.
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 6 top cover 7 display-feed flex cable Display Bezel CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 8. Disconnect the bottom flex-cable connector from the inverter connector on the system board by peeling up the pull-tab and pulling the tab down and away from the inverter connector. 1 inverter connector 2 bottom flex-cable connector 3 pull-tab Installing the Display Panel 1.
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual Display Latch Assembly Removing the Display Latch Assembly CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 spring 2 spring hook (display latch) 3 display latch assembly 4 M2.5 x 5-mm screws (2) 5 top cover 6 spring hook (top cover) Installing the Display Latch Assembly 1.
Display: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/display.htm (10 of 10) [2/28/2004 6:46:40 AM].
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page EMI Shield, Video Card, and Palm Rest Dell™ Inspiron™ 1100, 5100, and 5150 Service Ma.
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual Video Card Removing the Video Card CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual 2. Remove the keyboard . 3. Remove the EMI shield . 4. Remove the two M2.5 x 8-mm screws that secure the video card to the system board. 1 pull-tab 2 video card 3 M2.
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual Installing the Video Card 1. Align the posts on the video card with the screw holes in the system board. 2. Press down on the two areas on the video card that are labeled "PUSH" until you feel the video card click into place.
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual 9. Turn the computer back over and remove the two M2.5 x 5-mm screws from the top of the palm rest. file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/palmrest.
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual 10. Disconnect the touch pad connector from the system board. NOTICE: Carefully separate the palm rest from the base plastics to avoid damage to the palm rest. file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/palmrest.
EMI Shield, Video Card, and Palm Rest: Dell Inspiron 1100, 5100, and 5150 Service Manual 11. Starting at the back center of the palm rest, use your fingers to separate the palm rest from the base plastics by lifting the inside edge of the palm rest. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/palmrest.
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Microprocessor Thermal-Cooling Assembly Dell™ Inspiron™ 1100, 5100, and 5150 Servic.
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 captive screws (4) 2 fan power-cable connector 7. Pull up the microprocessor thermal-cooling assembly by the pull-tab to lift the assembly out of the system board.
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 1100, 5100, and 5150 Service Manual 1. If you are installing a replacement microprocessor thermal-cooling assembly, remove the mylar that covers the thermal grease on the assembly. If you are installing the assembly that you removed in the previous section: a.
Microprocessor Module: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Microprocessor Module Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Removing the Microprocessor Module CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Microprocessor Module: Dell Inspiron 1100, 5100, and 5150 Service Manual The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw. 1 ZIF-socket cam screw 2 ZIF socket 3 microprocessor module 4 pin-1 corner of microprocessor 5 triangle on system board 7.
Microprocessor Module: Dell Inspiron 1100, 5100, and 5150 Service Manual NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in the ZIF socket does not require force.
Microprocessor Module: Dell Inspiron 1100, 5100, and 5150 Service Manual file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/cpu.htm (4 of 4) [2/28/2004 6:46:44 AM].
Speakers: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Speakers Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Removing the Speakers CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Speakers: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 left speaker 2 routing clips (3) 3 speaker connector 4 right speaker NOTICE: Remove the speaker cables from their routing clips with care to avoid damaging the cables. 9. Remove the speaker cables from under or between their routing clips.
Speakers: Dell Inspiron 1100, 5100, and 5150 Service Manual Installing the Speakers 1. Slide the speakers down into the base plastics. NOTICE: Ensure that the speaker cables are under or between their routing clips. NOTE: Speakers face out in the base plastics holders.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page System Board Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual Removing the System Board CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual 11. Remove the palm rest . 12. Remove the microprocessor thermal-cooling assembly . 13. Remove the microprocessor . 14. Remove the speakers . 15. Remove the two M2.5 x 5-mm screws from the battery bay shield, and remove the shield.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual 16. Remove the three M2.5 x 5-mm system board screws from the hard drive cage. 17. Remove the two M2.5 x 5-mm system board screws from the optical drive cage. 1 hard drive cage 2 M2.5 x 5-mm screws (3) 3 optical drive cage 4 M2.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual 1 optical drive cage 2 M2.5 x 5-mm screws (2) 3 left antenna 4 hard drive cage 19. Remove the two hex nuts that secure the video connector to the base plastics. file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/sysboarb.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual 20. Lift the front of the system board out and away from the base plastics. Installing the System Board 1. Insert the video connector on the replacement system board through the back of the base plastics.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual secure the shield to the system board. 7. Replace the speakers . 8. Replace the microprocessor . NOTICE: Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel.
System Board: Dell Inspiron 1100, 5100, and 5150 Service Manual 20. Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the screen. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/sysboarb.
Flashing the BIOS: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Flashing the BIOS Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
Base Plastics: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Base Plastics Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual .
Base Plastics: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/base.htm (2 of 2) [2/28/2004 6:46:46 AM].
Pinout Assignments for I/O Connectors: Dell Inspiron 1100, 5100, and 5150 Service Manual Back to Contents Page Pinout Assignments for I/O Connectors Dell™ Inspiron™ 1100, 5100, and 5150 Service Ma.
Pinout Assignments for I/O Connectors: Dell Inspiron 1100, 5100, and 5150 Service Manual 3 DLUMA-L 4 DCRMA-L Composite Video Pin Signal 5 NC 6 DCMPS-L 7 COMP/B USB Connector Pin Signal 1 USB5V+ 2 USBP– 3 USBP+ 4 GND file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/pinoutsb.
Pinout Assignments for I/O Connectors: Dell Inspiron 1100, 5100, and 5150 Service Manual Video Connector Pin Signal Pin Signal 1 CRT_R 9 5V+ 2 CRT_G 10 GND 3 CRT_B 11 MONITOR_DETECT– 4 NC 12 DDC_DATA 5 GND 13 CRT_HS 6 GND 14 CRT_VS 7 GND 15 DDC_CLK 8 GND IEEE 1394 Connector file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/pinoutsb.
Pinout Assignments for I/O Connectors: Dell Inspiron 1100, 5100, and 5150 Service Manual Pin Signal 1 TPB- 2 TPB+ 3 TPA- 4 TPA+ Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/pinoutsb.
An important point after buying a device Dell 5150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 5150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 5150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 5150 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 5150 will certainly help you make a decision on the purchase.
If you already are a holder of Dell 5150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 5150.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 5150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 5150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
