Instruction/ maintenance manual of the product 435MT Dell
Go to page of 40
DellStudioXPS™435MTServiceManual Model DCMMF Notes, Cautions, and Warnings Information in this document is subject to change without notice. © 2008DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Replacing the Badge Back Light DellStudioXPS™435T/9000ServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Remove the front panel (see Replacing the Front Panel ).
Back to Contents Page Before You Begin DellStudioXPS™435MTServiceManual Technical Specifications Recommended Tools Turning Off Your Computer Safety Instructions This chapter provides procedures for removing and installing the components in your computer.
3. Disconnect all telephone or network cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Press and hold the power button while the system is unplugged to ground the system board.
Back to Contents Page Replacing a PCI Express Card DellStudioXPS™435MTServiceManual Removing a PCI Express Card Installing a PCI Express Card Replacing the Card Retention Bracket Configuring Your Computer After Removing or Installing a PCI Express Card Removing a PCI Express Card 1.
9. Install a filler bracket in the empty card - slot opening. 10. Replace the card retention bracket (see Replacing the Card Retention Bracket ). 11. Replace the computer cover (see Replacing the Computer Cover ). 12. Connect the computer and devices to electrical outlets, and then turn them on.
12. Connect the computer and devices to electrical outlets, and then turn them on. 13. To complete the installation, see Configuring Your Computer After Removing or Installing a PCI Express Card .
Back to Contents Page Replacing the Battery DellStudioXPS™435MTServiceManual 1. Record all the screens in system setup (see System Setup ) so that you can restore the correct settings in step 10 . 2. Follow the procedures in Before You Begin .
Back to Contents Page Replacing the Computer Cover DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Lay your computer on its side with the computer cover facing up. 3. Open the padlock, if applicable.
Back to Contents Page Replacing the Processor DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin .
9. If the release lever on the socket is not fully extended, move it to that position. 10. Orient the front and back alignment - notches on the processor with the front and back alignment - notches on the socket. 11. Align the pin - 1 corners of the processor and socket.
Back to Contents Page .
Back to Contents Page Replacing Drives DellStudioXPS™435MTServiceManual Replacing a Hard Drive Replacing an Optical Drive Replacing the FlexDock Rem.
8. Align the four screw holes on the hard drive with the screw holes on the hard drive bay. 9. Replace the four screws that secure the hard drive to the chassis. 10. Connect the power and data cables to the hard drive. 11. Ensure that all the cables are properly connected and firmly seated.
13. Replace the computer cover (see Replacing the Computer Cover ). 14. Connect your computer and devices to their electrical outlets, and turn them on. Replacing the FlexDock 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ).
14. Replace the computer cover (see Replacing the Computer Cover ). 15. Connect your computer and devices to electrical outlets, and then turn them on.
Back to Contents Page CAUTION: To comply with FCC regulations, it is recommended that you replace the drive panel insert whenever the FlexDock or optical drive is removed from the computer.
Back to Contents Page Replacing Fans DellStudioXPS™435MTServiceManual Replacing the Chassis Fan Replacing the Processor Fan and Heat Sink Assembly Replacing the Chassis Fan 1. Follow the procedures in Before You Begin .
4. Carefully move away any cables that are routed over the processor fan and heat sink assembly. 5. Loosen the four captive screws securing the processor fan and heat sink assembly. 6. Lift the processor fan and heat sink assembly out of the computer, and set it aside.
Back to Contents Page Replacing the Front Panel DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Grasp and lift the front panel grips one at a time to release it from the front of the computer.
Back to Contents Page Replacing the Front I/O Panel DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Remove the front panel (see Replacing the Front Panel ).
.
Back to Contents Page Replacing Memory Module(s) DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Locate the memory modules on the system board (see System Board Components ).
8. Insert the module into the connector until the module snaps into position. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 9. Replace the computer cover (see Replacing the Computer Cover ).
Back to Contents Page Replacing the Power Supply DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Follow the DC power cables that stem from the power supply and disconnect each connected power cable.
Back to Contents Page .
Back to Contents Page Replacing the Rubber Foot DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin .
Back to Contents Page Replacing the System Board DellStudioXPS™435MTServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Remove any expansion cards on the system board (see Replacing a PCI Express Card ).
10. Replace the eight screws that secure the system board to the chassis. 11. Connect the cables that you removed from the system board. 12. Replace the memory modules (see Replacing Memory Module(s) ). 13. Replace the processor (see Replacing the Processor ).
Back to Contents Page System Setup DellStudioXPS™435MTServiceManual Overview Clearing Forgotten Passwords Clearing CMOS Settings Flashing the BIOS .
Processor Cache L3 Displays the processor L3 cache size. Memory Installed Indicates the amount of installed memory in MB. Memory Available Indicates the amount of memory available in MB. Memory Speed Indicates the memory speed in MHz. Memory Technology Indicates the memory technology; DDR3.
Boot Sequence This feature allows you to change the boot sequence for devices. Boot Options l Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.
Clearing Forgotten Passwords 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Locate the 3 - pin password connector (PSWD) on the system board (see System Board Components ).
4. Remove the 2 - pin jumper plug from pins 2 and 3 and fix it on 1 and 2. 5. Wait for approximately five seconds to clear the CMOS setting. 6. Remove the 2 - pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3. 7. Replace the computer cover (see Replacing the Computer Cover ).
Back to Contents Page Technical Overview DellStudioXPS™435MTServiceManual Inside View of Your Computer System Board Components Inside View of Your Computer System Board Components WARNING: Before working inside your computer, read the safety information that shipped with your computer.
Back to Contents Page (DIMM_5) (DIMM_2) 7 memory module connector (DIMM_6) 8 memory module connector (DIMM_3) 9 main power connector (PWR1) 10 password jumper (PSWD) 11 serial ATA drive connector .
Back to Contents Page DellStudioXPS™435T/9000ServiceManual Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Replacing the Top Cover DellStudioXPS™435T/9000ServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Remove the front panel (see Replacing the Front Panel ).
8. Remove the I/O panel (see Replacing the I/O Panel ). 9. Set the computer top cover aside in a secure location. 10. To replace the top cover, perform the removal procedure in reverse order.
Back to Contents Page Replacing the I/O Panel DellStudioXPS™435T/9000ServiceManual 1. Follow the procedures in Before You Begin . 2. Remove the computer cover (see Replacing the Computer Cover ). 3. Remove the front panel (see Replacing the Front Panel ).
An important point after buying a device Dell 435MT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 435MT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 435MT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 435MT you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 435MT will certainly help you make a decision on the purchase.
If you already are a holder of Dell 435MT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 435MT.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 435MT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 435MT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
