Instruction/ maintenance manual of the product 2200 Dell
Go to page of 2
www .dell.com | support.dell.com 0K5672A00 Dell™ PowerConnect™ 2200/2300 Series Ethernet Switches Introduction This document describes changes to the technical specifications of the P o werConnect 2200/2300 series Ethernet switches.
www .dell.com | support.dell.com Additional T roubleshooting Step The following information is in addi tion to that found in T able 2-1 in the Dell P owerConnect 2216/2224/2324 Switches User ’s Guide . ____________________ Information in this document is subject to change without notice.
An important point after buying a device Dell 2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 2200 will certainly help you make a decision on the purchase.
If you already are a holder of Dell 2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 2200.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center