Instruction/ maintenance manual of the product 160L Dell
Go to page of 16
Dell™OptiPlex™160LServiceManual Removing the Computer Cover Control Panel I/O Panel Power Supply System Board Replacing the Computer Cover To remove or replace all other 160L components, see the 160L Systems User's Guide .
Back to Contents Page Control Panel Dell™OptiPlex™160LServiceManual Removing the Control Panel Replacing the Control Panel 1. Shut down the computer through the Start menu. 2. Ensure that your computer and attached devices are turned off.
Replacing the Control Panel 1. Insert the control panel tab into the notch on the chassis. 2. Ensure that the control panel lever is secured by the tab on the chassis. 3. Connect the control panel cable to the connector on the system board.
Back to Contents Page Replacing the Computer Cover Dell™OptiPlex™160LServiceManual 1. Ensure that all cables are connected, and fold cables out of the way. 2. Ensure that no tools or extra parts are left inside the computer.
Back to Contents Page I/O Panel Dell™OptiPlex™160LServiceManual Removing the I/O Panel Replacing the I/O Panel 1. Shut down the computer through the Start menu. 2. Ensure that your computer and attached devices are turned off.
4. Remove the two screws that secure the I/O panel to the computer. 5. Remove the I/O panel and disconnect the sound/USB cable from the I/O panel.
Replacing the I/O Panel 1. Attach the sound/USB cable to the new I/O panel. 2. Insert the I/O panel into the I/O cage and replace the screws that you removed in step4 . 3. Reattach the front panel to the side hinges, and then rotate it until it snaps onto the front of the computer.
5. Replace the computer cover. 6. Connect your computer and devices to electrical outlets, and turn them on. Back to Contents Page NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
Back to Contents Page Power Supply Dell™OptiPlex™160LServiceManual Removing the Power Supply Replacing the Power Supply DC Power Connectors 1. Shut down the computer through the Start menu. 2. Ensure that your computer and attached devices are turned off.
5. Remove the power supply from the computer. Replacing the Power Supply 1. Slide the power supply into place. 2. Replace the four screws that secure the power supply to the back of the computer. 3. Reinstall the fan assembly. 4.
12 - volt Power Connector Peripheral Power Connectors Floppy Drive Power Connector Back to Contents Page 2 +3.3 VDC Orange 3 COM Black 4 +5 VDC R.
Back to Contents Page System Board Dell™OptiPlex™160LServiceManual System Board Components Jumper Settings Replacing the System Board System Board Componen.
To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated. Resetting CMOS Settings 1. Shut down the computer through the Start menu. 2. Ensure that your computer and attached devices are turned off.
a. Locate the Clear Password and Clear CMOS jumpers on the system board. b. Remove the password jumper from its pins. c. Place the password jumper on the Clear CMOS pins and wait approximately 5 seconds. d. Remove the jumper from the Clear CMOS pins and place the jumper back on the password pins.
8. Lift the system board out from the computer. 9. Place the system board that you just removed next to the replacement system board. Visually compare the replacement system board to the existing system board to ensure that you have the correct part.
Back to Contents Page Removing the Computer Cover Dell™OptiPlex™160LServiceManual 1. Shut down the computer through the Start menu.
An important point after buying a device Dell 160L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 160L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 160L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 160L you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 160L will certainly help you make a decision on the purchase.
If you already are a holder of Dell 160L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 160L.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 160L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 160L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
