
Owner’s Manual
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

of your projector.
data and tells you how to avoid the problem.
injury, or death.
Information in this document is subject to change without notice. © 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
January 2006 P/N CG356 Rev. A00
Model 1200MP





Your projector comes with all the items shown below. Ensure that you have all the items, and contact Dell if anything is missing. For more information see, "Contacting Dell".
Power cable (1.8m) VGA cable (D-sub to D-sub) (1.8m)


S-Video cable (2.0m) USB cable (1.8m)

Composite cable (1.8m) VGA to component cable (1.8m)

RCA to audio cable (1.8m) Mini pin to Mini pin cable (1.8m)


Your Dell™ Projector 5
Package Contents

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m


6 Your Dell™ Projector
Package Contents (continued) · Remote control Batteries · Carrying Case Documentation

1 2 3 4 5 6 7 8

Connecting Your Projector 7

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m


Previous Page features on the remote control.
8 Connecting Your Projector



Connecting Your Projector 9

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
for the cable and RS232 remote control software.



10 Connecting Your Projector

Turning Your Projector On
1 Remove the lens cap.
2 Connect the power cord and appropriate cables. For information about connecting the projector, see "Connecting Your Projector" on page 7.
3 Press the Power button (see "About Your Projector" on page 6 to locate the Power button). The Dell logo displays for 30 seconds.
4 Turn on your source (computer, DVD player, etc.). The projector automatically detects your source.
If the "Searching..." message appears on the screen, ensure that the appropriate cables are securely connected.
If you have multiple sources connected to the projector, press the Source button on the remote control or control panel to select the desired source.
following procedure.
1 Press the Power button twice. The cooling fan continues to operate for 90 seconds.
2 Disconnect the power cord from the electrical outlet and the projector.
following message appears: " Press Power button to Turn Off Projector. Projector must cool down for 90 seconds before unplugging or restarting." The message disappears in 5 seconds or you can press any button on the control panel to erase it.
Using Your Projector 11

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
1 Press the elevator button.
2 Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position.
3 Use the tilt adjustment wheel to fine-tune the display angle; if necessary, press the side elevator buttons to raise the rear side of the projector to the desired display angle.
1 Press the elevator button.
2 Lower the projector, and then release the button to lock the elevator foot into position.

12 Using Your Projector


Using Your Projector 13

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
elevator foot are fully retracted before moving the projector or placing the projector in its carrying case.
1 Rotate the zoom tab to zoom in and out.
2 Rotate the focus ring until the image is clear. The projector focuses at distances from 3.3ft to 32.8ft (1m to 10m).

Protect your projector and restrict access to it with Password Security feature. This security utility enables you to impose a variety of access restrictions to protect your privacy and stop others from tampering with your projector. This means that the projector cannot be used if it is taken without authorization, and thus serves as a theft-prevention feature.
When Password Protect is enabled (On), a Password Protect screen requesting you to enter a password will be displayed when the power plug is inserted into the electrical outlet and the power for the projector is first turned on.
By default, this function is disabled. You can enable this feature using the Password menu. Refer to section in this manual titled "Management Menu-Password" for further details. This password security feature will be activated on the next time you turn on the projector.
14 Using Your Projector
1 Zoom tab · 2 Focus ring

If you enable this feature, you will be asked to enter the projector's password after you turn on the projector:

1 1st time password input request:
a Use the directional keys to enter the
password.
b Press the Menu button to confirm.
c If the password verification is successful, you
may resume with accessing the projector's functions and its utilities.

2 If you have entered incorrect password, you will be given another 2 chances. After the three invalid attempts, the projector will automatically turn off.
Dell. For more information see, "Contacting Dell".
Using Your Projector 15

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

1 Power Turn the projector on and off. For more information, see "Turning Your Projector On" on page 11 and "Turning Your Projector Off" on page 11.
2 Source Press to toggle through Analog RGB, Composite, Component-i, S-video, and Analog YPbPr sources when multiple sources are connected to the projector.
3 Four Directional Keys
The four directional keys can be used to toggle through the tabs in the OSD.
5 LAMP warning light If the Lamp light is solid orange, replace the lamp.
6 Keystone adjustment If your image is not perpendicular to the screen, then it does not appear square. Press to adjust image distortion caused by tilting the projector. (±16 degrees)
7 Resync Press to synchronize the projector to the input source. Resync does not operate if the on-screen display (OSD) is displayed.
16 Using Your Projector

8 Menu Press to activate the OSD. Use the directional keys and the Menu button to navigate through the OSD.

1 Video Mode Press once to show the current display mode. Press the button again to toggle between PC, Movie, sRGB, or User mode.
2 Next Page Press to move to the next page.
use this function.
3 Menu Press to activate the on-screen display (OSD). Use the directional keys and the Menu button to navigate through the OSD.
4 4:3/16:9 Press to switch the aspect ratio: 1:1, 16:9, 4:3.
5 Hide button Press to hide the image, press again to display the image.
6 Volume +/- Press to increase (+) or decrease (-) the volume or toggle through the OSD tabs.
Using Your Projector 17

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
7 Keystone adjustment If your image is not perpendicular to the screen, then it does not appear square. Press to adjust image distortion caused by tilting the projector (±16 degrees).
8 Resync Press to synchronize the projector to the input source. Resync does not operate if the OSD is displayed.
9 Source Press to toggle through Analog RGB, Composite, Component-i, S-video, and Analog YPbPr sources when multiple sources are connected to the projector.
10 Directional keys Use the or button to select OSD items, use the ◁ or button to make adjustments.
11 Previous Page Press to go to the previous page.
use this function.
12 Power Turn the projector on and off. For more information, see "Turning Your Projector On" on page 11 and "Turning Your Projector Off" on page 11.
The projector has a multi-language On-Screen Display (OSD) that can be displayed with or without an input source present.
In the Main Menu, press the or button on the control panel or the or button on the remote control navigate through the tabs. Press the button on the control panel or the Menu button on the remote control to select a submenu.
In the submenus, press the or button on the control panel or the or button on the remote control to make a selection. When an item is selected, the color changes to dark gray. Use the or button on the control panel or the ◁ or button on the remote control make adjustments to a setting.
To exit the OSD, go to the Exit tab and press the button on the control panel or the Menu button on the remote control.
18 Using Your Projector


BRIGHTNESS—Use the or button on the control panel or the ◁ or button on the remote control to adjust the brightness of the image.

CONTRAST—Use the or button on the control panel or the ◁ or button on the remote control to adjust the degree of difference between the brightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
COLOR TEMP—Adjust the color temperature. The screen appears more blue at higher temperatures. The screen appears more red at lower temperatures.
User mode activates the values in the color setting menu.
COLOR SETTING—Manually adjust red, green, and blue color.
KEYSTONE—Adjust the image distortion caused by tilting the projector (±16 degrees).
AUTO KEYSTONE—Select Yes to enable the auto correction for vertical image distortion caused by tilting the projector. To manually adjust the keystone, press the button on the control panel or the Menu button on the remote control.
Using Your Projector 19

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
SEMI-AUTO KEYSTONE—Press the button on the control panel or the Menu button on the remote control to activate the Semi-Auto Keystone correction for image distortion.
ASPECT RATIO—Select an aspect ratio to adjust how the image appears.
VIDEO MODE—Select a mode to optimize the display image based on how the projector is being used: Movie, PC, sRGB (provides more accurate color representation), and User (set your preferred settings). If you adjust the settings for White Intensity or Degamma, the projector automatically switches to User.
WHITE INTENSITY—Select 0 to maximize the color reproduction and 10 to maximize the brightness.
DEGAMMA—Adjust between 1 and 6 to change the color performance of the display. The default setting is 0.

FREQUENCY—Change the display data clock frequency to match the frequency of your computer graphics card. If you see a vertical flickering bar, use Frequency control to minimize the bars. This is a coarse adjustment.
TRACKING—Synchronize the phase of the display signal with the graphics card. If you experience an unstable or flickering image, use Tracking to correct it. This is a fine adjustment.
20 Using Your Projector

HOR. POSITION—Press the button on the control panel or the ◁ button on the remote control to adjust the horizontal position of the image to the left and press the
button on the control panel or the button on the remote control to adjust the horizontal position of the image to the right.
VER. POSITION—Press the button on the control panel or the ◁ button on the remote control to adjust the vertical position of the image downward and press the
button on the control panel or the button on the remote control to adjust the vertical position of the image upward.
is connected.

SATURATION—Press the button on the control panel or the ◁ button on the remote control to decrease the amount of color in the image and press the button the control panel or the button on the remote control to increase the amount of color in the image.
SHARPNESS—Press the button on the control panel or the ◁ button on the remote control to decrease the sharpness and press the button on the control panel or the button on the remote control to increase the sharpness.
TINT—Press the button on the control panel or the◁ button on the remote control to increase the amount of green in the image and press the button on the control panel or the button on the remote control to increase the amount of red in the image.
VOLUME—Press the button on the control panel or the - button on the remote control to decrease the volume and press the button on the control panel or the + button on the remote control to increase the volume.

MUTE—Allows to mute the volume.
Using Your Projector 21

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

MENU LOCATION—Select the location of the OSD on the screen.
SIGNAL TYPE—Manually select the signal type (RGB, YCbCr, or YPbPr).
LAMP HOUR—Displays the operating hours since the last timer reset.
LAMP RESET—After you install a new lamp, select Yes to reset the lamp timer.
POWER SAVING—Select Yes to set the power saving delay period. The delay period is the amount of time you want the projector to wait without signal input. After that set time, the projector enters power saving mode and turns off the lamp. The projector turns back on when it detects an input signal or you press the Power button. After two hours, the projector turns off and you need to press the Power button to turn the projector on.
OSD LOCK—Select On to enable the OSD Lock for hiding the OSD menu. To display OSD menu, press the button on the control panel or the Menu button on the remote control for 15 seconds.
AUTO SOURCE—Select On (the default) to auto detect the available input signals. When the projector is on and you press Source, it automatically finds the next available input signal. Select Off to lock the current input signal. When Off is selected and you press Source, you select which input signal you want to use.
ECO MODE—Select On to use the projector at a lower power level (150 Watts), which may provide longer lamp life, quieter operating, and dimmer luminance output on the screen. Select Off to operate at normal power level (200 Watts).
OSD TIMEOUT —Use this function to set the duration OSD menu stay active (at idle state).
22 Using Your Projector

PASSWORD —Select On to enable you to impose a variety of access restrictions to protect your privacy and stop others from tampering with your projector.
a Press the ◁ button to select On.
b Set your password with the directional keys and press the Menu button to
confirm.

will be asked to enter the correct password. If the password verification is successful, only then the Password can be set to Off.

CHANGE PASSWORD—Use this function to modify the password to your preference.
a Enter your current password with the
directional keys.
b Set your new password.
c Verify again your new password.
d Press the Menu button to confirm.
reset if the Password setting is set to Off.
Using Your Projector 23

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

Press the or button on the control panel or the or button on the remote control to select the preferred language for the OSD.
Press the on the control panel or the Menu button on the remote control to confirm the language selection.

Press the button on the control panel or the Menu button on the remote control to display the test pattern chart. Use this function to adjust the focus of the projected screen. Use the or button on the control panel or the ◁ or button on the remote control to exit from this mode.

Select Yes to reset the projector to its factory default settings. Reset items include both computer image and video image settings.
24 Using Your Projector

If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact Dell. For more information see, "Contacting Dell".
No image appears on the screen

search for the source.
Troubleshooting Your Projector 25
Problem Possible Solution

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Problem (continued) Possible Solution (continued)
Partial, scrolling, or incorrectly displayed image
1 Press the Resync button on the remote control or the control panel.
2 If you are using a Dell portable computer, set the resolution of the computer to XGA (1024 x 768):
a Right-click the unused portion of your
Windows desktop, click Properties and then select Settings tab.
b Verify the setting is 1024 x 768 pixels for the
external monitor port.
c Press .
If you experience difficulty in changing resolutions or your monitor freezes, restart all the equipment and the projector.
If you are not using a Dell portable, see related documentation.
The screen does not display your presentation
If you are using a Dell portable computer, press
Image is unstable or flickering
Adjust the tracking in the OSD Computer Image tab.
Image has vertical flickering bar
Adjust the frequency in the OSD Computer Image tab.
Image color is not correct • If your graphic card output signal appears green, and you would like to display VGA at 60Hz signal, please go into the OSD select Management, select Signal Type, and then select RGB.
Image is out of focus 1 Adjust the focus ring on the projector lens.
2 Ensure that the projection screen is within the required distance from the projector (3.3ft [1m] to 32.8ft [10m]).
26 Troubleshooting Your Projector

Problem (continued) Possible Solution (continued)
The image is stretched when displaying a 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect ratio to full screen with a 4:3 (letter-box) default setting. If the image is still stretched, adjust the aspect ratio as follows:
Image is reversed Select Management from the OSD and adjust the projection mode.
Lamp is burned out or makes a popping sound
When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on, and displays Lamp Defective in the LCD display until the lamp is replaced. To replace the lamp, see "Changing the Lamp" on page 28.
The remote control is not operating smoothly or in very limited range
The battery may be low. If so, replace it with 2 new AAA batteries.
OSD display window does not appear on the screen after pressing the Menu button on the remote control or on the control panel
Try the following procedures:
1 Press the Menu button on the remote control or on the control panel for 15 seconds until OSD pops up.
2 Select Management from the OSD.
3 Set OSD Lock to "Off".
LAMP light is solid orange If the Lamp light is solid orange, replace the lamp.
TEMP light is solid orange The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell.
TEMP light is blinking orange
A projector fan has failed and the projector automatically shuts down. If this problem persists, contact Dell.
Troubleshooting Your Projector 27

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Replace the lamp when the message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" appears on the screen. If this problem persists after replacing the lamp, contact Dell. For more information see, "Contacting Dell".
the lamp until the projector has been allowed to cool down for at least 30 minutes.
1 Turn off the projector and disconnect the power cord.
2 Let the projector cool for at least 30 minutes.
3 Loosen the 2 screws that secure the lamp cover, and remove the cover.
sharp and can cause injury. Remove all broken pieces from the projector and dispose or recycle according to state, local or federal law. Go to www.dell.com/hg for addtitional information.
4 Loosen the 2 screws that secure the lamp.
lamp glass at any time. Projector lamps are very fragile and may shatter if touched.
5 Pull up the lamp by its metal handle.
under warranty be returned to Dell.
6 Replace with the new lamp.
7 Tighten the 2 screws that secure the lamp.
8 Place the lamp cover and tighten the 2 screws.
9 Reset the lamp usage time by selecting Yes for Lamp Reset icon in the OSD Management tab. (Refer to Management Menu in Owner's Manual)
28 Troubleshooting Your Projector

Light Valve Single-chip DLP™ DDR (double data rate) technology
Brightness 2000 ANSI Lumens (Max)
Contrast Ratio 2100:1 Typical (Full On/Full Off)
Uniformity 80% Typical (Japan Standard - JBMA)
Lamp 200-watt user-replaceable UHP 2500- hour lamp(up to 3000 hours in eco mode)
Number of Pixels 800 x 600 (SVGA)
Displayable Color 16.7M colors
Color Wheel Speed 100~127.5Hz (2X)
Projection Lens F/2.4-2.58, f=19~21.9mm with 1.15x manual zoom lens
Projection Screen Size 28.57-285.7 inches (diagonal)
Projection Distance 3.3~32.8 ft (1m~10m)
Video Compatibility NTSC, NTSC 4.43, PAL, PAL-M, PAL- N, SECAM, and HDTV (1080i, 720P, 576i/P, 480i/P) compatibility Composite video, Component video and S-video capability
H. Frequency 31kHz-79kHz (Analog)
V. Frequency 50Hz-85Hz (Analog)
Power Supply Universal 100-240V AC 50-60Hz with PFC input
Power Consumption 250 Watts full power (typical), 200 Watts in eco mode
Specifications 29

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Audio 1 speaker, 2 Watts RMS
Noise Level 36dB(A) Full-on mode, 33dB(A) Eco-mode
Weight 2.24kg (4.94 lbs)
Dimensions (W x H x D) External 9.9 x 3.96 x 8.4 ± 0.04 inches (251 x 101 x 213 ± 1mm)
Regulatory FCC, CE, VCCI, UL, cUL, Nemko-GS, ICES-003, MIC, C-Tick, GOST, CCC, PSB, NOM, IRAM, SABS
One mini-DIN RS232 for wired remote projector control from PC
30 Specifications


w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Size of the Payload (WORD)
CRC16 for the entire packet (WORD)
0xefbe 0x10 0x0005 0xffc6 0x1111 0x0001 0x01 Power on 0xbfc7 0x02 Menu 0x7e07 0x03 Up 0x3fc5 0x04 Down 0xfe05 0x05 Left 0xbe04 0x06 Right 0x7fc4 0x07 Resync 0x3fc0 0x08 Source 0xfe00 0x09 Volume+ 0xbe01 0x0a Volume- 0xffc3 0x0d Mute 0x7e02 0x0f Hide 0x3fca 0x10 Video Mode 0x7fcb 0x13 V. Keystone Up 0x3e09 0x14 V. Keystone Down 0x7e08 0x17 Aspect ratio
(4:3/16:9) 0x3e0c 0x18 Power OFF 0xffcc 0x19 Source-VGA
0xbfcd 0x1a Source-VGA YPbPr
1080i) 0x7e0d 0x1b Source-VGA YCbCr
(480i/576i) 0xbe1f 0x22 Source-S-Video
0x7fdf 0x23 Source-Composite 0xbfd9 0x2a ECO Mode ON
0x7e19 0x2b ECO Mode OFF 0x3fdb 0x2c Auto Source ON
0xfe1b 0x2d Auto Source OFF
0xbe1a 0x2e Factory Reset
0x7fda 0x2f Lamp Hour
0x3e12 0x30 Firmware Version
0x7e46 0xff System Status

V. Frequency (Hz) H. Frequency (KHz)
VGA 640x350 70 31.5
VGA 640x350 85 37.9
VGA 640x400 85 37.9
VGA 640x480 60 31.5
VGA 640x480 72 37.9
VGA 640x480 75 37.5
VGA 640x480 85 43.3
VGA 720x400 70 31.5
VGA 720x400 85 37.9
SVGA 800x600 56 35.2
SVGA 800x600 60 37.9
SVGA 800x600 72 48.1
SVGA 800x600 75 46.9
SVGA 800x600 85 53.7
XGA 1024x768 43.4 35.5
XGA 1024x768 60 48.4
XGA 1024x768 70 56.5
XGA 1024x768 75 60.0
XGA 1024x768 85 68.7
SXGA 1280x1024 60 63.98
SXGA+ 1400x1050 60 63.98
MAC LC13" 640x480 66.66 34.98
MAC II 13" 640x480 66.68 35
MAC 16" 832x624 74.55 49.725
MAC 19" 1024x768 75 60.24
MAC 1152x870 75.06 68.68
MAC G4 640x480 60 31.35
MAC G4 640x480 120 68.03
IMac DV 640x480 117 60
IMac DV 800x600 95 60
IMac DV 1024x768 75 60
IMac DV 1152x870 75 68.49
IMac DV 1280x960 75 75
Compatibility Modes · Mode Resolution (ANALOG) · Specifications 33

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
34 Specifications

To contact Dell electronically, you can access the following websites:
For specific web addresses for your country, find the appropriate country section in the table below.
listed.
is available at a separate telephone number listed for participating countries. If you do not see a telephone number listed that is specific for XPS portable computers, you may contact Dell through the support number listed and your call will be routed appropriately.
When you need to contact Dell, use the electronic addresses, telephone numbers, and codes provided in the following table. If you need assistance in determining which codes to use, contact a local or an international operator.

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Antigua and Barbuda General Support 1-800-805-5924
Argentina (Buenos Aires) International Access Code: 00 Country Code: 54 City Code: 11
E-mail for desktop and portable computers: la-techsupport@dell.com
E-mail for servers and EMC®
Hardware And Warranty Support Services
Australia (Sydney) International Access Code: 0011 Country Code: 61 City Code: 2
Austria (Vienna) International Access Code: 900 Country Code: 43 City Code: 1
Home/Small Business Sales 0820 240 530 00
Home/Small Business Fax 0820 240 530 49
0820 240 530 14
Home/Small Business Customer Care
Preferred Accounts/Corporate Customer Care
0820 240 530 16
Support for XPS portable computers only
0820 240 530 81
Home/Small Business Support for all other Dell computers
0820 240 530 14
Switchboard 0820 240 530 00

Barbados General Support 1-800-534-3066
Belgium (Brussels) International Access Code: 00 Country Code: 32 City Code: 2
02 481 92 96
Hardware And Warranty Support for XPS portable computers only
Hardware And Warranty Support for all other Dell computers
02 481 92 88
Hardware And Warranty Support Fax
02 481 92 95
Customer Care 02 713 15 65
Corporate Sales 02 481 91 00
Fax 02 481 92 99
Switchboard 02 481 91 00
Bermuda General Support 1-800-342-0671
Customer Support, Hardware and Warranty Support 0800 90 3355
Hardware and Warranty Support Fax
Customer Care Fax 51 481 5480
Sales 0800 90 3390
British Virgin Islands General Support toll-free: 1-866-278-6820
Hardware and Warranty Support (Penang, Malaysia)
Customer Care (Penang, Malaysia) 604 633 4888
Transaction Sales (Penang, Malaysia)
51 481 5470 · 604 633 4966 · 604 633 4955

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Canada (North York, Ontario) International Access Code: 011
AutoTech (automated Hardware and Warranty Support)
Customer Service (Home Sales/Small Business)
Customer Service (med./large business, government)
Customer Service (printers, projectors, televisions, handhelds, digital jukebox, and wireless)
Hardware Warranty Support (Home Sales/Small Business)
Hardware Warranty Support (med./large bus., government)
Hardware Warranty Support (printers, projectors, televisions, handhelds, digital jukebox, and wireless)
Sales (Home Sales/Small Business) toll-free: 1-800-387-5752
Sales (med./large bus., government) toll-free: 1-800-387-5755
Spare Parts Sales & Extended Service Sales
1 866 440 3355
Cayman Islands General Support 1-800-805-7541
1-877-335-5767

Hardware and Warranty Support Fax
Hardware and Warranty Support (Dell™ Dimension™ and Inspiron)
Hardware and Warranty Support (OptiPlex™, Latitude™, and Dell Precision™)
Hardware and Warranty Support (servers and storage)
Hardware and Warranty Support (projectors, PDAs, switches, routers, and so on)
Hardware and Warranty Support (printers)
Customer Care Fax 592 818 1308
Large Corporate Accounts Key Accounts
Large Corporate Accounts North Government and Education
Large Corporate Accounts East Government and Education
Large Corporate Accounts Queue Team
Large Corporate Accounts Spare Parts
592 818 1350

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Colombia General Support 980-9-15-3978
Costa Rica General Support 0800-012-0435
Czech Republic (Prague) International Access Code: 00 Country Code: 420
Hardware and Warranty Support 22537 2727
Customer Care 22537 2707
Hardware and Warranty Fax 22537 2728
Denmark (Copenhagen) International Access Code: 00 Country Code: 45
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell computers
Customer Care (Relational) 7023 0184
Home/Small Business Customer Care
Switchboard (Relational) 3287 1200
Switchboard Fax (Relational) 3287 1201
Switchboard Fax (Home/Small Business)
Dominican Republic General Support 1-800-148-0530
El Salvador General Support 01-899-753-0777

Finland (Helsinki) International Access Code: 990 Country Code: 358 City Code: 9
Hardware and Warranty Support 09 253 313 60
Customer Care 09 253 313 38
Fax 09 253 313 99
Switchboard 09 253 313 00
France (Paris) (Montpellier) International Access Code: 00 Country Code: 33 City Codes: (1) (4)
Home and Small Business
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell computers
Customer Care 0825 823 833
Switchboard 0825 004 700
Switchboard (calls from outside of France)
04 99 75 40 00
Sales 0825 004 700
Fax 0825 004 701
Fax (calls from outside of France) 04 99 75 40 01
Hardware and Warranty Support 0825 004 719
Customer Care 0825 338 339
Switchboard 01 55 94 71 00
Sales 01 55 94 71 00
Fax 01 55 94 71 01
0825 387 129 · 0825 387 270 · Corporate

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Germany (Langen) International Access Code: 00 Country Code: 49 City Code: 6103
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell computers
Home/Small Business Customer Care
Global Segment Customer Care 06103 766-9570
Preferred Accounts Customer Care 06103 766-9420
Large Accounts Customer Care 06103 766-9560
Public Accounts Customer Care 06103 766-9555
Hardware and Warranty Support 00800-44 14 95 18
00800-44 14 00 83
Gold Service Hardware and Warranty Support
Gold Service Switchboard 2108129811
Guatemala General Support 1-800-999-0136

Hardware and Warranty Support (Dimension and Inspiron)
Hardware and Warranty Support (OptiPlex, Latitude, and Dell Precision)
Hardware and Warranty Support (PowerApp™, PowerEdge™, PowerConnect™, and PowerVault™)
Customer Care 3416 0910
Large Corporate Accounts 3416 0907
Global Customer Programs 3416 0908
Medium Business Division 3416 0912
Home and Small Business Division 2969 3105
Hardware And Warranty Support 1600338045 and 1600448046
Sales (Large Corporate Accounts) 1600 33 8044
Sales (Home and Small Business) 1600 33 8046
2969 3188 · 2969 3191 · 2969 3196

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Ireland (Cherrywood) International Access Code: 00 Country Code: 353 City Code: 1
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell computers
U.K. Hardware and Warranty Support (dial within U.K. only)
Home User Customer Care 01 204 4014
Small Business Customer Care 01 204 4014
U.K. Customer Care (dial within U.K. only)
Corporate Customer Care 1850 200 982
Corporate Customer Care (dial within U.K. only)
Ireland Sales 01 204 4444
U.K. Sales (dial within U.K. only) 0870 907 4000
Fax/Sales Fax 01 204 0103
Switchboard 01 204 4444
Home and Small Business
Hardware and Warranty Support 02 577 826 90
Customer Care 02 696 821 14
Fax 02 696 821 13
Switchboard 02 696 821 12
Hardware and Warranty Support 02 577 826 90
Customer Care 02 577 825 55
Fax 02 575 035 30
Switchboard 02 577 821

Jamaica General Support (dial from within Jamaica only)
Japan (Kawasaki) International Access Code: 001 Country Code: 81 City Code: 44
Hardware And Warranty Support (servers)
Hardware And Warranty Support outside of Japan (servers)
Hardware And Warranty Support (Dimension and Inspiron)
Hardware And Warranty Support outside of Japan (Dimension and Inspiron)
Hardware And Warranty Support (Dell Precision, OptiPlex, and Latitude)
toll-free:0120-198-433
Hardware And Warranty Support outside of Japan (Dell Precision, OptiPlex, and Latitude)
Hardware And Warranty Support (PDAs, projectors, printers, routers)
Hardware And Warranty Support outside of Japan (PDAs, projectors, printers, routers)
24-Hour Automated Order Service 044-556-3801
Business Sales Division (up to 400 employees)
Preferred Accounts Division Sales (over 400 employees)
Large Corporate Accounts Sales (over 3500 employees)
Public Sales (government agencies, educational institutions, and medical institutions)
Global Segment Japan 044-556-3469

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Support (Dimension, PDA, Electronics and Accessories)
Latin America Customer Hardware and Warranty Support (Austin, Texas, U.S.A.)
Customer Service (Austin, Texas, U.S.A.)
Fax (Hardware and Warranty Support and Customer Service) (Austin, Texas, U.S.A.)
Sales (Austin, Texas, U.S.A.) 512 728-4397
SalesFax (Austin, Texas, U.S.A.) 512 728-4600 or 512 728-3772
Support 342 08 08 075
Home/Small Business Sales +32 (0)2 713 15 96
Corporate Sales 26 25 77 81
Customer Care +32 (0)2 481 91 19
Fax 26 25 77 82
Customer Service (Xiamen, China) 34 160 910
Transaction Sales (Xiamen, China) 29 693 115

Malaysia (Penang) International Access Code: 00 Country Code: 60 City Code: 4
Hardware And Warranty Support (Dell Precision, OptiPlex, and Latitude)
Hardware And Warranty Support (Dimension, Inspiron, and Electronics and Accessories)
Hardware And Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault)
Customer Hardware And Warranty Support
Sales 50-81-8800 or 01-800-888-3355
Customer Service 001-877-384-8979 or 001-877-269-3383
Main 50-81-8800 or 01-800-888-3355
Netherlands Antilles General Support 001-800-882-1519
001-877-384-8979 or 001-877-269-3383

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Netherlands (Amsterdam) International Access Code: 00 Country Code: 31 City Code: 20
020 674 45 94
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell computers
020 674 45 00
020 674 47 66
Hardware and Warranty Support Fax
Home/Small Business Customer Care
020 674 42 00
Relational Customer Care 020 674 4325
Home/Small Business Sales 020 674 55 00
Relational Sales 020 674 50 00
Home/Small Business Sales Fax 020 674 47 75
Relational Sales Fax 020 674 47 50
Switchboard 020 674 50 00
Switchboard Fax 020 674 47 50
General Support 0800 441 567
Nicaragua General Support 001-800-220-1006
Norway (Lysaker) International Access Code: 00 Country Code: 47
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell products
Relational Customer Care 671 17575
Home/Small Business Customer Care
Fax Switchboard 671 16865
Panama General Support 001-800-507-0962
Peru General Support 0800-50-669

Poland (Warsaw) International Access Code: 011 Country Code: 48 City Code: 22
Customer Service Phone 57 95 700
Customer Care 57 95 999
Sales 57 95 999
Customer Service Fax 57 95 806
Reception Desk Fax 57 95 998
Switchboard 57 95 999
Hardware and Warranty Support 707200149
Customer Care 800 300 413
Sales 800 300 410 or 800 300 411 or 800 300 412 or 21 422 07 10
Fax 21 424 01 12
Puerto Rico General Support 1-800-805-7545
St. Kitts and Nevis General Support toll-free: 1-877-441-4731
St. Lucia General Support 1-800-882-1521
St. Vincent and the Grenadines
Singapore (Singapore) International Access Code: 005 Country Code: 65
Hardware and Warranty Support (Dimension, Inspiron, and Electronics and Accessories)
Hardware and Warranty Support (OptiPlex, Latitude, and Dell Precision)
Hardware and Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault)

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Slovakia (Prague) International Access Code: 00 Country Code: 421
Hardware and Warranty Support 02 5441 5727
Customer Care 420 22537 2707
Fax 02 5441 8328
Tech Fax 02 5441 8328
Switchboard (Sales) 02 5441 7585
South Africa (Johannesburg) International Access Code: 09/091 Country Code: 27 City Code: 11
Gold Queue 011 709 7713
Hardware and Warranty Support 011 709 7710
Customer Care 011 709 7707
Sales 011 709 7700
Fax 011 706 0495
Switchboard 011 709 7700
Southeast Asian and Pacific Countries
Hardware and Warranty Support, Customer Service, and Sales (Penang, Malaysia)
Home and Small Business
Hardware and Warranty Support 902 100 130
Customer Care 902 118 540
Sales 902 118 541
Switchboard 902 118 541
Fax 902 118 539
Hardware and Warranty Support 902 100 130
Customer Care 902 115 236
Switchboard 91 722 92 00
Fax 91 722 95 83
604 633 4810 · Corporate

Sweden (Upplands Vasby) International Access Code: 00 Country Code: 46 City Code: 8
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support for all other Dell products
08 590 05 199
Relational Customer Care 08 590 05 642
Home/Small Business Customer Care
08 587 70 527
Employee Purchase Program (EPP) Support
20 140 14 44
Hardware and Warranty Support Fax
08 590 05 594
Sales 08 590 05 185
Switzerland (Geneva) International Access Code: 00 Country Code: 41 City Code: 22
Hardware and Warranty Support for XPS portable computers only
0848 33 88 57
Hardware and Warranty Support (Home and Small Business) for all other Dell products
Hardware and Warranty Support (Corporate)
Customer Care (Home and Small Business)
Customer Care (Corporate) 0848 821 721
Fax 022 799 01 90
Switchboard 022 799 01 01

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Hardware and Warranty Support (OptiPlex, Latitude, Inspiron, Dimension, and Electronics and Accessories)
Hardware and Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault)
Hardware and Warranty Support (OptiPlex, Latitude, and Dell Precision)
Hardware and Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault)
Trinidad/Tobago General Support 1-800-805-8035
Turks and Caicos Islands General Support toll-free: 1-866-540-3355

U.K. (Bracknell) International Access Code: 00 Country Code: 44 City Code: 1344
Hardware and Warranty Support (Corporate/Preferred Accounts/PAD [1000+ employees])
Hardware and Warranty Support for XPS portable computers only
Hardware and Warranty Support (direct and general) for all other products
Global Accounts Customer Care 01344 373 186
Home and Small Business Customer Care
Corporate Customer Care 01344 373 185
Preferred Accounts (500–5000 employees) Customer Care
Central Government Customer Care
Local Government & Education Customer Care
Health Customer Care 01344 373 194
Home and Small Business Sales 0870 907 4000
Corporate/Public Sector Sales 01344 860 456
Home and Small Business Fax 0870 907 4006

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
U.S.A. (Austin, Texas) International Access Code: 011 Country Code: 1
AutoTech (portable and desktop computers)
Hardware and Warranty Support (Dell TV, Printers, and Projectors) for Relationship customers
Consumer (Home and Home Office) Support for all other Dell products
Employee Purchase Program (EPP) Customers
Financial Services (lease/loans) toll-free: 1-877-577-3355
Financial Services (Dell Preferred Accounts [DPA])
Employee Purchase Program (EPP) Customers
Printers and Projectors Support toll-free: 1-877-459-7298
Public (government, education, and healthcare)
Employee Purchase Program (EPP) Customers
Dell Outlet Store (Dell refurbished computers)
Extended Service and Warranty Sales
Dell Services for the Deaf, Hard-of- Hearing, or Speech-Impaired
toll-free 1-877-459-7298 · Business

U.S. Virgin Islands General Support 1-877-673-3355
Venezuela General Support 8001-3605

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

ANSI Lumens—A standard for measuring light output, used for comparing projectors.
Aspect Ratio—The most popular aspect ratio is 4:3 (4 by 3). Early television and computer video formats are in a 4:3 aspect ratio, which means that the width of the image is 4/3 times the height.
Backlit (Backlight)—Refers to a remote control, or a projector control panel, that has buttons and controls that are illuminated.
Bandwidth—The number of cycles per second (Hertz) expressing the difference between the lower and upper limiting frequencies of a frequency band; also, the width of a band of frequencies.
Brightness—The amount of light emitting from a display or projection display or projection device. The brightness of projector is measured by ANSI lumens.
Color Temperature—A method of measuring the whiteness of a light source. Metal halide lamps have a higher temperature compared to halogen or incandescent lights.
Component Video—A method of delivering quality video in a format that contains all the components of the original image. These components are referred to as luma and chroma and are defined as Y'Pb'Pr' for analog component and Y'Cb'Cr' for digital component. Component video is available on DVD players and projectors.
Composite Video—The combined picture signal, including vertical and horizontal blanking and synchronizing signals.
Compression—A function that deletes resolution lines from the image to fit in the display area.
Compressed SVGA—To project an 800x600 image to a VGA projector, the original 800x600 signal must be compressed down. The data displays all the information with only two thirds of the pixels (307,000 vs 480,000). The resulting image is SVGA page size but sacrifices some of the image quality. If you are using an SVGA computers, connecting VGA to a VGA projector provide better results.
Compressed SXGA—Found on XGA projectors, compressed SXGA handling allows these projectors to handle up to 1280x1024 SXGA resolution.
Compressed XGA—Found on SVGA projectors, compressed XGA handling allows these projectors to handle 1024x768 XGA resolution.
Glossary 57

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Contrast Ratio—Range of light and dark values in a picture, or the ratio between their maximum and minimum values. There are two methods used by the projection industry to measure the ratio:
1 Full On/Off — measures the ratio of the light output of an all white image (full on) and the light output of an all black (full off) image.
2 ANSI — measures a pattern of 16 alternating black and white rectangles. The average light output from the white rectangles is divided by the average light output of the black rectangles to determine the ANSI contrast ratio.
Full On/Off contrast is always a larger number than ANSI contrast for the same projector.
dB—decibel—A unit used to express relative difference in power or intensity, usually between two acoustic or electric signals, equal to ten times the common logarithm of the ratio of the two levels.
Diagonal Screen—A method of measuring the size of a screen or a projected image. It measures from one corner to the opposite corner. A 9ft high, 12ft wide, screen has a diagonal of 15ft. This document assumes that the diagonal dimensions are for the traditional 4:3 ratio of a computer image as per the example above.
DLP—Digital Light Processing — Reflective display technology developed by Texas Instruments, using small manipulated mirrors. Light passes through a color filter is sent to the DLP mirrors which arrange the RGB colors into a picture projected onto screen, also known as DMD.
DMD—DMD — Digital Micro-mirror Device — Each DMD consists of thousands of tilting, microscopic aluminum alloy mirrors mounted on a hidden yoke.
DVI—Digital Visual Interface — Defines the digital interface between digital devices such as projectors and personal computers. For devices that support DVI, a digital to digital connection can be made that eliminates the conversion to analog and thereby delivers an unblemished image.
Focal Length—The distance from the surface of a lens to its focal point.
Frequency—It is the rate of repetition in cycles per seconds of electrical signals. Measured in Hz.
Hz—Frequency of an alternating signal. See Frequency.
Keystone Correction—Device that will correct an image of the distortion(usually a wide-top narrow-bottom effect) of a projected image caused by improper projector to screen angle.
58 Glossary

Laser Pointer—A small pen or cigar-sized pointer, that contains a small battery powered laser, which can project a small, red (typically), high intensity beam of light that is immediately very visible on the screen.
Maximum Distance—The distance from a screen the projector can be to cast an image that is useable (bright enough) in a fully darkened room.
Maximum Image Size—The largest image a projector can throw in a darkened room. This is usually limited by focal range of the optics.
Metal Halide Lamp—The type of lamp used in many medium and all high end portable projectors. These lamps typically have a "half-life" of 1000-2000 hours. That is they slowly lose intensity (brightness) as they are used, and at the "half-life" point, they are half as bright as when new. These lamps output a very "hot" temperature light, similar to mercury vapor lamps used in street lights. Their whites are extremely white (with a slight bluish cast) and make a halogen lamp's whites look very yellowish by comparison.
Minimum Distance—The closest position that a projector can focus an image onto a screen.
NTSC—The United States broadcast standard for video and broadcasting.
PAL—A European and international broadcast standard for video and broadcasting. Higher resolution than NTSC.
Power Zoom—A zoom lens with the zoom in and out controlled by a motor, usually adjusted from the projector's control panel and also the remote control.
Reverse Image—Feature that allows you to flip the image horizontally. When used in a normal forward projection environment text, graphics, etc, are backwards. Reverse image is used for rear projection.
RGB—Red, Green, Blue — typically used to describe a monitor that requires separate signals for each of the three colors.
S-Video—A video transmission standard that uses a 4 pin mini-DIN connector to send video information on two signal wires called luminance (brightness, Y) and chrominance (color, C). S-Video is also referred to as Y/C.
SECAM—A French and international broadcast standard for video and broadcasting. Higher resolution than NTSC.
SVGA—Super Video Graphics Array — 800 x 600 pixels count.
SXGA—Super Ultra Graphics Array, — 1280 x 1024 pixels count.
UXGA—Ultra Extended Graphics Array — 1600 x 1200 pixels count.
Glossary 59

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
VGA—Video Graphics Array — 640 x 480 pixels count.
XGA—Extra Video Graphics Array — 1024 x 768 pixels count.
Zoom Lens—Lens with a variable focal length that allows operator to move the view in or out making the image smaller or larger.
Zoom Lens Ratio—Is the ratio between the smallest and largest image a lens can projector from a fixed distance. For example, a 1.4:1 zoom lens ratio means that a 10-foot image without zoom would be a 14-foot image with full zoom.
60 Glossary





contact Dell, 25 remote control, 27
Troubleshooting, 25 · Index 63
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.