Instruction/ maintenance manual of the product MYW-MD Aiphone
Go to page of 4
- INSTRUCTIONS - The MYW-MD adaptor converts the video from a 2-wire signal to a standard coaxial video signal (Demodulator mode). It can also be used to convert a standard CCTV camera's signal to a 2-wire signal, compatible with Aiphone's MY series video monitors (Modulator mode).
Center cond. to MV+ Braid to MV- CCTV Camera 75 Ohm, 1V Peak-to-peak (Independently powered) Center cond. to MV+ Braid to MV- CCTV Camera 75 Ohm, 1V Peak-to-peak (Independently powered) MA1 MA2 MV+ MV.
DEMODULATOR MYW-MD used for VIDEO OUTPUT with Aiphone MY series Video Entry Systems The picture from the Video Door Station can be seen at standard monitors whenever the Aiphone system is activated. MY-1CD JUMPER CLIP: (Located under rubber cover in upper right corner of the faceplate of the MYW-MD) Move to Demodulator (lower) position.
IMPORTANT: Modulator Deviation Control: Contrast control located underneath the cover in the upper right corner of the unit. This applies only when the MYW-MD is used with a CCTV camera. To adjust the picture for more contrast, turn the variable resistor clockwise with a small screwdriver.
An important point after buying a device Aiphone MYW-MD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiphone MYW-MD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiphone MYW-MD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiphone MYW-MD you will learn all the available features of the product, as well as information on its operation. The information that you get Aiphone MYW-MD will certainly help you make a decision on the purchase.
If you already are a holder of Aiphone MYW-MD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiphone MYW-MD.
However, one of the most important roles played by the user manual is to help in solving problems with Aiphone MYW-MD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiphone MYW-MD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
