Instruction/ maintenance manual of the product In-Wall Loudspeaker Definitive Technology
Go to page of 8
Congratulations Congratulations on your purchase of the Definitive T echnology Ultimate In-W all RLS II Loudspeaker . This reference quality loudspeaker provides the highest level of sonic performance and construction quality and is designed for easy flush mount installation in walls of homes and commercial spaces.
The Ultimate In-W alls have been voiced by Definitive engineers (using the superb facilities of the Definitive T echnology Advanced Research Facility) to the same high-end standards as all Definitive loudspeakers.
Please Inspect For Shipping Damage Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely will have occurred in handling after it left the plant and should be reported at once to your Definitive dealer or the delivery company that delivered your loudspeakers.
Planning for Installation Please allow a minimum of 1 1 / 2 " of clearance all around the cutout behind the wallboard for your speakers. There must be at least 3 7 / 8 " depth from the front of the drywall to the back of the cavity .
5 • Also note that the size of the RLS II may require some modification of the stud structure in your wall. This should only be done by a competent professional who will configure the studs to maintain their structural integrity . • Speaker wire must be run inside your wall as part of the installation process of in-wall loudspeakers.
If you experience any difficulties with your Ultimate In-W all Loudspeakers, try the suggestions described below . If you are still having problems, please consult your Definitive T echnology authorized dealer for assistance. • Make sure all your system interconnections and power cords are solidly in their place.
In-W all Loudspeaker Specifications UIW RLS II Outer Dimension: 8 1 / 8 " W x 29 3 / 4 " H Cut-out Size: 7" W x 28 1 / 2 " H x 3 7 / 8 " D Recommended Amplification: 10 – 350 watts Efficiency: 92 dB Frequency Response: 22Hz – 30kHz Nominal Impedance: Compatible with 8 ohm outputs Driver Complement: Two 6.
This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly .
An important point after buying a device Definitive Technology In-Wall Loudspeaker (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Definitive Technology In-Wall Loudspeaker yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Definitive Technology In-Wall Loudspeaker - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Definitive Technology In-Wall Loudspeaker you will learn all the available features of the product, as well as information on its operation. The information that you get Definitive Technology In-Wall Loudspeaker will certainly help you make a decision on the purchase.
If you already are a holder of Definitive Technology In-Wall Loudspeaker, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Definitive Technology In-Wall Loudspeaker.
However, one of the most important roles played by the user manual is to help in solving problems with Definitive Technology In-Wall Loudspeaker. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Definitive Technology In-Wall Loudspeaker along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
