Instruction/ maintenance manual of the product BGCU DCS
Go to page of 24
US CA Installation instructions Backguard f or prof essional ranges and cookt ops Models BGRU and BGCU Modèles BGRU et BGCU Guide d’ installation Dosseret pour cuisinières et tables de cuisson pro.
.
1 US CA WARNING! Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing, using or servicing this equipment.
2 US CA.
3 US CA TABLE OF CONTENTS Backguards for ranges – BGRU models SPECIFICATIONS 4 RANGE MOUNT STANDARD BACKGUARD INSTALLATION 4 WALL MOUNT FULL BACKGUARD INSTALLATION 5 Backguards for cooktops – BGCU.
4 US CA SPECIFICATIONS RANGE MOUNT STANDARD BACKGUARD INSTALLATION 1. Unpack the backguard and screw the front section onto the back section, as shown (Fig. 01) 2. Align the backguard with the range, so that it rests on the island trim. Fasten the bottom of the backguard to the rear of the range using all the screws provided, as shown (Fig.
5 US CA WALL MOUNT FULL BACKGUARD INSTALLATION RECOMMENDED INSTALLATION ORDER : 1) VENT HOOD 2)BACKGUARD SYSTEM 3) RANGE 1. Locate and level range per installation instructions. 2. After unpacking all backguard system parts, locate the Back Section 1/4” (see fig.
6 US CA WALL MOUNT FULL BACKGUARD INSTALLATION Fig.05 Fig.06 #8 Self- tapping sheet metal screws Back Section Front Section Rack Holes* Tabs* *Insure tabs and holes engage to secure top of backguard. CARE AND MAINTENANCE This is made of stainless steel.
7 US CA NOTES.
8 # 8 Self-tapping sheet metal screws Back Section Back Section Front Section Trim Slots to choose desired spac- ing between Cooktop Trim and Backguard. Fig.07 Fig.08 32” US CA SPECIFICATIONS WALL MOUNT STANDARD BACKGUARD INSTALLATION 1. Locate and level cooktop per installation instructions.
9 US CA 1/4” WALL MOUNT FULL BACKGUARD INSTALLATION RECOMMENDED INSTALLATION ORDER : 1) VENT HOOD 2) BACKGUARD SYSTEM 3) COOKTOP 1. Locate and level cooktop per installation instructions. 2. After unpacking all backguard system parts, locate the Back Section 1/4” (see fig.
10 US CA WALL MOUNT FULL BACKGUARD INSTALLATION Back Section Front Section Rack Holes* Tabs* *Insure tabs and holes engage to secure top of backguard. Fig.11 Fig.12 CARE AND MAINTENANCE This is made of stainless steel. Use the mildest cleaning procedure first.
11 US CA NOTES.
12 US CA FR.
13 US CA FR AVERTISSEMENT! Toute installation, ajustement, altération, maintenance ou entretien incorrect peut causer des dommages matériels, des blessures ou la mort. Veuillez lire soigneusement ces instructions d’installation, d’utilisation et d’entretien avant d’installer, utiliser ou effectuer l’entretien de cet appareil.
14 US CA FR TABLE DES MATIÈRES Dosserets pour cuisinières – modèles BGRU SPÉCIFICATIONS 15 INSTALLATION DU DOSSERET ORDINAIRE 15 INSTALLATION DU DOSSERET MURAL INTÉGRAL 16 Dosserets pour .
15 US CA FR SPÉCIFICATIONS INSTALLATION DU DOSSERET ORDINAIRE 1. Déballez le dosseret et vissez la section avant sur la section arrière, comme illustré (Fig.01). 2. Alignez le dosseret sur l’arrière de la cuisinière de façon à ce qu’il repose sur la garniture d’îlot, puis fixez.
16 US CA FR INSTALLATION DU DOSSERET MURAL INTÉGRAL ORDRE D’ INSTALLATION RECOMMANDÉ : 1) HOTTE À ÉVACUATION 2) DOSSERET 3) CUISINIÈRE 1. Positionnez la cuisinière et mettez-la de niveau conformément aux instructions d’installation. 2.
17 US CA FR INSTALLATION DU DOSSERET MURAL INTÉGRAL Fig.05 Fig.06 Vis à tôle autota- raudeuses n° 8 Section arrière Section avant Grille Languettes* Trous* *Assurez-vous que les languettes pénètrent dans les trous cor- respondants de sorte à fixer le haut du dosseret.
18 US CA FR.
19 US CA FR SPÉCIFICATIONS A 22,23 cm (8-3/4 po) 30,5 cm (12 po) 76,2cm (30 po) 30,5cm (12 po) A 3,33 cm (1-5/16 po) 3,33 cm (1-5/16 po) INSTALLATION DU DOSSERET MURAL ORDINAIRE 1. Positionnez la table de cuisson et mettez-la de niveau conformément aux instructions d’installation.
20 US CA FR INSTALLATION DU DOSSERET MURAL INTÉGRAL ORDRE D’ INSTALLATION RECOMMANDÉ : 1) HOTTE À ÉVACUATION 2) DOSSERET 3) TABLE DE CUISSON 1. Positionnez la table de cuisson et mettez-la de niveau conformément aux instructions d’installation.
21 US CA FR INSTALLATION DU DOSSERET MURAL INTÉGRAL Vis à tôle autotarau- deuses n° 8 Section arrière Section avant Grille Trous* Languettes* Fig.11 Fig.12 ENTRETIEN ET MAINTENANCE Ce produit est en acier inoxydable. Employez d’abord la méthode de nettoyage la plus douce.
ww w .dcsappliances.c om Copyright © F isher & Paykel 2010. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
An important point after buying a device DCS BGCU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DCS BGCU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DCS BGCU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DCS BGCU you will learn all the available features of the product, as well as information on its operation. The information that you get DCS BGCU will certainly help you make a decision on the purchase.
If you already are a holder of DCS BGCU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DCS BGCU.
However, one of the most important roles played by the user manual is to help in solving problems with DCS BGCU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DCS BGCU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
