Instruction/ maintenance manual of the product PE Datamax
Go to page of 100
PE Seri es Operator’s Man u al.
.
CG T r iu m vir ate is a trad em ark of A g f a Corp or ation . C G Ti m e s , ba s e d upo n Ti m e s N e w R o m a n unde r li c e ns e f r o m T he Mo no t y pe Co r po r a t i o n. SE A Q is a trad em ar k of Datam ax Barcod e P rod u cts Corp or ation .
.
Ag ency Comp l i ance and A ppr ov al s U L: U L1950 S afety of In for m ation T ech n ol og y Eq u ip m en t 1 . Nur f ür Ge br a uc h i nne r ha lb e i ne s G e bä ude s ge e i gne t .
I mpo rta n t S afety Ins tru cti on s T h is prin ter h as be en c arefully desig n e d to g ive you m an y yea rs of safe, r eliab le per for m an ce. As w it h all elect ri cal equi pm en t, th er e are a f ew basic pr ecauti on s you sh ould take to avoid h urtin g your s elf or dam a g ing th e prin ter.
i Co n ten ts Prin ter Ov erv iew 1.0 I n tr oduction ........................................................................ 1 1.1 About T h is Prin ter ............................................................... 2 1.1 .1 S ta n d ar d F eat u re s.
ii Using Yo ur P r i nte r 4.0 U sin g t h e P ri n t er ’ s F r on t P an el ............................................28 4.1 Ac cessi n g th e M en u Tr e e ...................................................3 0 4.1 .1 B asi c Fu n c ti on s .
iii Appe ndi c e s A ppe ndix A AS CI I Co n t r ol Ch a rt..................................................................A- 1 A ppe ndix B Av ai la bl e F on ts a n d B ar co des .................................................... B - 1 H u m a n - R ea dab l e F on ts .
.
PE Seri es Op er at or’ s M an u al 1 P ri n ter Ov erv i ew 1 .0 Intr oduc tion T h e PE Series , h erea fter referred to a s th e prin te r, is a hig h quality, h ig h volum e, e x trem ely durable prin t e n g in e, des ig n ed ex c lusive ly for us e with labe l ap plic ato r sys te m s .
PE Se ries O perat o r’s M an u al 2 1 .1 About This Pr inte r T h is prin te r offers th e followin g sta n da rd and option al fe atu res : 1.1.1 St an d ard F eat u r es Adv anc ed T e chnology T.
PE Seri es Op er at or’ s M an u al 3 1.1.2 O p t i on al Feat u res 300 DP I T h is fac tory i n s ta lled option pr ovide s a prin th ead res olution of 300 dots pe r in ch w ith a 4. 16 in ch prin t w idt h a n d 1MB DR A M . Left-Hand L ef t-h an d labe l output m odel for s ys tem con fig uration flex ibility.
PE Se ries O perat o r’s M an u al 4.
PE Seri es Op er at or’ s M an u al 5 G etti n g Started 2 .0 Bef or e U s ing This Pr inte r Unpacki ng the Pri nter Th e pr in t er w as car eful ly p ackag ed t o avoi d an y d am ag e du ri n g tr an sit . B efo re op en in g , cl osely i n spect t h e box for dam ag es .
PE Se ries O perat o r’s M an u al 6 I nspecti ng th e P ri nter After rem ov in g th e prin te r fr o m th e b ox , ch e c k th e rem a in in g c onten ts of th e pa c ka g e .
PE Seri es Op er at or’ s M an u al 7 2. 1 G en eral O vervi ew T h e follow in g illus tration s s h ow th e m ajor com pon e n ts of your prin ter. I t m ay be helpful to refer ba ck to th is s e ctio n for th e n a m e s an d loca tion s of th e prin ter ’s various pa rts.
PE Se ries O perat o r’s M an u al 8 F igur e 2-2 R ight -hand Mod e l, I nter ior F ron t V iew F igur e 2-3 R ight -Hand Mod e l, M edia P ath.
PE Seri es Op er at or’ s M an u al 9 Setti n g Up th e P ri n ter 3 .0 Intr oduc tion Th is ch ap ter ex plai n s h ow t o con n ect th e p rin ter to t h e h ost, lo ad m edia a n d prin t a c on fig uratio n la bel.
PE Se ries O perat o r’s M an u al 10 3 .2 Loa ding Me dia Th is secti on ex pl ain s t h e load in g o f m ed ia. n Move th e H e ad -L if t L ev er ‘up’ to rais e th e prin th ea d, as sh own i n Fig ure 3-2. F igur e 3-2 Head- L ift L e v er o P ush ‘u p’ o n t h e h i n g ed D ri v e P lat e at t h e p oi n t sh o w n in Fig ure 3-3.
PE Seri es Op er at or’ s M an u al 11 p Pee l th e first 12 in c h e s of la be l m ate rial from th e liner an d disc ard. ; Not e : I f you w is h to lea ve th e la bel attac h ed to th e lin er do n ot th read t h e m ed ia th r oug h th e D ri ve Pl ate.
PE Se ries O perat o r’s M an u al 12 F igur e 3-5 M edia Loading ( detail) r T o c los e , raise th e Drive Plate ba c k up, un til th e pla te s naps in to pl ace. See F ig u re 3 . 3. s L ow er th e H e a d-L if t L ev er un til the prin th ea d is loc ke d in th e d ow n position.
PE Seri es Op er at or’ s M an u al 13 3 .3 Loa ding R ibbon ( The r ma l Tr a ns fe r ) Th e pr in t er can u s e tw o m eth ods to cr eate an im ag e o n th e m edia. Th e fi rst m eth o d, called dir ect th erm al , uses special ly t reated label stock con tai n in g dyes th at tu rn b lack w i th h eat an d pr essure.
PE Se ries O perat o r’s M an u al 14 q R e m ove th e J -H ook fr om th e Ribbon Take -up H ub, ( as a con ven ie n t option you m ay use an e m pty r ibbon core to rew in d th e spe n t ribbon , if usin g th is m eth od do n ot rein sta ll th e J -H ook).
PE Seri es Op er at or’ s M an u al 15 3 .4 R ibbon R e mov a l R e mov al of a P art ia lly Us e d R oll o f R ibbon Com plete th e follow in g steps to rem ove an d s ave a ribbon : n Cut th e ribbon at th e poin t sh own i n Fig ure 3-8. o T urn th e Ri bbon Take -up H ub un til th e e n d of th e ribbon h as clear ed t h e pr in th ead area.
PE Se ries O perat o r’s M an u al 16 R e mo v a l o f a C ompl e te ly Us e d Ribbon Com plete th e follow in g steps to rem ove a com plete ly use d ribbon : n U n la tc h and raise th e prin th e a d. o R ota te th e Ribbon Ta ke-up H ub, w in din g it un til th e ribbon clear s th e m edia pat h .
PE Seri es Op er at or’ s M an u al 17 3 .5 Ins ta lling a FLASH C a r tr idge FL AS H cart ri dg es pr ovi de t h e sam e f eatu res as DR AM , w ith t h e added be n efit of pr ovidin g perm an en t s torag e for custom fon ts, la bel form ats and im ag es .
PE Se ries O perat o r’s M an u al 18 p H olding th e FL ASH Ca rtridg e with th e la be l fac in g up , in s e rt it in to th e c onn ector, se e Fig ure 3-10. Push f irm ly, but do n ot f orce it, doin g s o could da m ag e th e ca rtr idg e a n d socket .
PE Seri es Op er at or’ s M an u al 19 3 .6 Pr int ing a C onfigur a t ion La be l B e for e beg in n in g , load th e prin t e r w ith 4” w ide m edia or con fig ure th e L ab el Width Adjus tm en t in the Adva n c ed Setup Men u to m e et your label w idth , (for th erm al tran sfer, also us e a m a tch in g ribbon .
PE Se ries O perat o r’s M an u al 20 COM M UNIC AT ION OPTIONS INP UT PO RT _ _ _ _ _ P ORT A BAUDR AT E _ _ _ _ 9600 PA RIT Y _ _ _ _ _ _ _ NONE WORD LENGT H _ _ _ 8 BIT S T O P BIT S _ _ _ _ _ _ .
PE Seri es Op er at or’ s M an u al 21.
PE Se ries O perat o r’s M an u al 22 3 .7 C onfigur a tion La bel E x pla na tion F ebr uar y 17, 1998 14:13 048 - Pr in te r da te a n d tim e , in clud in g J ulia n calen dar d ate.
PE Seri es Op er at or’ s M an u al 23 3. 8 T est P attern L abel T h e s e cond of th e lab els is the T es t Pa ttern L ab el, s ee Fig ure 3 -12. T h is m a trix is us e ful to de term in e th e Prin th ea d c on ditio n . For m ore in for m at ion co n cern in g m ain t en an ce, see Sect ion 6 .
PE Se ries O perat o r’s M an u al 24 3. 9 A p p li cato r Co nn ecti on T h e ap plic ator m e chan is m w ill r eceiv e th e pr in t ed lab el an d aff ix i t to an item . Applic a tor co n fig uration an d it’s c om m unication w ith th e pri n ter m ust be coor din ated.
PE Seri es Op er at or’ s M an u al 25 P in 5 - T h e Sta rt Pr int sig n a l is s e n t from th e A pplic a tor to th e Prin ter w h en th e Ap pl icato r is ready to b eg in an oth er cycl e. Also, dat a from th e h os t m u s t be s ent to th e Prin ter before th e Sta rt Prin t s ig n a l is s e n t from th e A pplic ato r.
PE Se ries O perat o r’s M an u al 26 3. 10 Op ti o ns Po rt T h e Optio n s Port is us e d for ex te rn al c on trol of th e prin te r via disc rete lin es . T h e Port con sis ts of +5V , Groun d, th r ee outputs, an d four in puts . T h is port can be m an ipulated via DPL ( Da tam ax Program min g L a ng ua ge).
PE Seri es Op er at or’ s M an u al 27.
PE Se ries O perat o r’s M an u al 28 Usi n g You r P ri n ter 4 .0 U s ing t he P r int e r ’s Fr ont P a ne l T h e prin ter’s de tac h a ble /rotata ble fron t panel con ta in s nin e button s , th ree li g h t s an d a 2 x 16 ch aracter di s play w it h con t rast adj ustm en t.
PE Seri es Op er at or’ s M an u al 29 Lights Po wer T h is illu m in a tes wh en th e prin te r is p ow e red ‘on ’. A delay of up to on e s ec on d is n orm al at ‘pow er up’ or ‘pow er dow n ’. R ibbo n/P ape r Th is illu m in ate s to indicate a fault in the m edia or ri bbon path .
PE Se ries O perat o r’s M an u al 30 4. 1 A ccessi ng th e Men u T ree T h e m en u is divided betw een ba s ic fun ction an d adva n ce d s etup leve ls .
PE Seri es Op er at or’ s M an u al 31 Ebsloftt Fin e tu n es th e pri n t con t ra st level . U sed to m atch pri n t con t r ast leve l w h en r epl aci n g th e pri n th ead. * Fact ory preset V alu e r an g e: 1- 64 Sele ctable w i th 64 in di catin g m ax im u m dar k n es s.
PE Se ries O perat o r’s M an u al 32 4.1.2 A dv an ced Set u p Adva n c e d s e tup is a g a teway le ading to additional sy s tem , m ainten an ce an d tes ting sub-le ve ls .
PE Seri es Op er at or’ s M an u al 33 QF!Pqujpot (con t.) B a c k f eed C n t r l Co n trols t h e tim in g associated with th e b ack feed i n g of a pr es en ted labe l. * 20 m s aft er pri n t 20 m illisec on d de lay bef o re p rin t in g t h e n e x t lab el.
PE Se ries O perat o r’s M an u al 34 Mbcfm!Pqujpot (con t.) P r i n t S p eed A l l ow s th e sele ction of di ff er en t rates t h at t h e l a bel will be prin t ed.
PE Seri es Op er at or’ s M an u al 35 Tztufn!pqujpot A l low s access t o ei g h t sy st em l evel opt i on s. F actor y Se t tin gs Re tur ns a l l p r i nte r s e tti ng s to fa c tor y de fa u l ts , w i th t h e ex ception of Seria l Nu m ber , Top-of - For m Adju st, Prin ter M ode l an d Dark n es s.
PE Se ries O perat o r’s M an u al 36 Dpnqbubcjmjuz T h re e sele ct ion s t o con t rol la bel p osit io n in g Offse t Bi a s * 220 110 Sele cts f r om two di ff er en t S tart of Pri n t position s . Th is c om m an d sets th e poin t wh er e pr in tin g s tart s , rel a t i ve t o th e Top-of-Form A dj u st valu e.
PE Seri es Op er at or’ s M an u al 37 Pqfsbujpo (CONT.) Te s t Mod e Ca u ses t h e prin ter t o sen d deb u g ch aract er s back t o t h e h ost. See A ppe n dix E f or l i s t i n g s . * D is able En able C u tte r Co n trols an ex t ern al cu t ter m ech an ism .
PE Se ries O perat o r’s M an u al 38 Nbjoufobodf S e l e c t s f i v e d i f fe r e nt ma i nte na nc e func t i o ns . Te s t P ri nt Each t e st prin t f u n ction i s a ctivated by press i n g th e Ø ke y. Cu rren t Con f ig P r i nts l a b e l s r e fl e c ti ng the p r i nter ’ s c ur r e n t s e tti ng s .
PE Seri es Op er at or’ s M an u al 39 Nbjoufobodf (con t.) I n st all e d Op t i on s Th ere a re two i n s tall ed option s to ch oose from : Cutter Ribbon Saver Npevmft M odu l es con t ain a s et of f i ve m em or y fu n ct i on rou tin es .
PE Se ries O perat o r’s M an u al 40 Input s Se n s or Nam e P o s s i bl e C o ndi t io n HD Head D = Down, U = Up CT Cutter D = Down, U = Up SP P resent Sensors Y = Bl ocked, N = Not Bl ocked RS .
PE Seri es Op er at or’ s M an u al 41.
PE Se ries O perat o r’s M an u al 42 P RI NT ER A DJUST M E NT S 5 .0 Intr oduc tion W h e n c h a n g ing labe l s iz e or m ate rial it m a y b e n e c es sa ry to a djus t ce rtain p rin ter co m pon e n ts a n d la be l s e ttin g s . T h is chapter provide s step- by- step i n str ucti on s fo r com plet in g t h ese adju s tm en ts.
PE Seri es Op er at or’ s M an u al 43 5. 2 M edi a Wid th A dju stm en t T h e prin ter is able to us e a w ide va riety of m e dia types , w idth s an d th ickn ess. T h e pr in t h ead m ech an ism h as a feat ure t h at al low s th e us er to m a ke a leve lin g adjus tm e n t.
PE Se ries O perat o r’s M an u al 44 ; No te : L abelin g prog r a m s ettin g s c an ove rr ide m an y of th e fun ction s ava ila ble th roug h the prin ter’s m e n u.
PE Seri es Op er at or’ s M an u al 45 5. 5 S etti n g S tart o f Pri n t an d P eel P osi ti on Ever y e ffor t h as be en m ade to m ake th e default param eters wor k for your application rig h t out of th e box . D ue to th e va st n um ber of softw are packag es , appl icator s, an d lab el fo rm ats th i s is n o t alw ay s th e cas e.
PE Se ries O perat o r’s M an u al 46 5 .6 C ont r olling Pr int Qua lit y T h e prin ter provid es m a x im um fle x ibility b y offerin g both dir e c t th erm al a n d th e rm al tran s fe r prin tin g cap abilitie s . T o s upport th es e prin tin g optio n s , th e prin te r h as a flexible s et o f prin tin g co n trols .
PE Seri es Op er at or’ s M an u al 47.
PE Se ries O perat o r’s M an u al 48 M A I NT ENA NCE 6 .0 Intr oduc tion T h e c h apter cove rs th e cle an in g recom m en da tion s for your prin ter.
PE Seri es Op er at or’ s M an u al 49 6 .1 C le a ning S c he dule Th e fo llo w in g table p rov ides a r ecom m en ded cl ean in g s ch edu le f or various parts of your pr in ter. CA UTI ON For your s afety an d to avoid da m ag in g th e Prin t e r , alw ays power off an d un plug th e un it befor e cle an in g .
PE Se ries O perat o r’s M an u al 50 6. 2 Cl ean in g th e Prin th ead W h e n p rin t qua lity be g in s to d egr a de th e typic al c a us e is a dirty pr in t h ead. U n r eadabl e barco des, p ri n t dr op- out areas, str eakin g an d s m udg ing are all p os s ible s ym pto m s .
PE Seri es Op er at or’ s M an u al 51 6. 3 Cl ean in g th e Pl aten Ro l ler Prin t quality m a y b e a ffecte d if th e pla ten becom es c on ta m in a te d w ith g rit, labe l a dh e s ive , or in k. T o cle a n th e pla ten: n T u rn ‘Off’ a n d unplu g t he pri n t e r.
PE Series O perat or’s M an u al 52 T ROU BLE SHOOT I NG 7 .0 Intr oduc tion Occasio n ally , si tuati on s occur th at r equir e som e tr oubles h ootin g s kills . Pos s ible proble m s itua tion s an d p otential so lution s a re lis te d in th is s ec tion .
PE Seri es Op er at or’ s M an u al 53 No di s pla y (t h e Po wer L ED is on) : T h e dis play con tras t m a y be s e t too low . U s in g a sm a ll screw dr iver use th e acces s open in g on th e fr on t pan el an d in crease th e s ett in g .
PE Series O perat or’s M an u al 54 No Pr int (con t. ) : Perform a Self-T es t. I f th e labe ls prin te d c orrec tly, ch e ck th e lab el fo rm at an d com m un icati on par am eter s, ( see Sect ion 7.3). Prin th e a d or prin t co n trol circ uitry m ay be d efe ctiv e, ca ll for serv ice.
PE Seri es Op er at or’ s M an u al 55 Miss ing D ata in the printe d labe l : Ch eck th e label for m at, (see S ectio n 7.3) . V eri fy t h at t h e proper syn tax w a s us e d for th e des ired fun ction an d th a t th e data fields a re properly def in e d.
PE Series O perat or’s M an u al 56 7. 2 Erro r Messag es T he p rinter' s c ontrol e l e c tro n i c s mon i to rs v a rio u s o pe ra tio n s . I f a problem is dete cte d, an error m e s s a g e w ill be dis pla ye d. T h e f ol lo w in g is a l ist of er r or m essag es w it h som e po ssib le cau ses an d s olution s .
PE Seri es Op er at or’ s M an u al 57 BQQMJDBUPS!CVTZ Sys tem is waitin g for con trol o f th e Prin t Cycl e fr om th e appl icat or. Pr in ter appl icat or en able con tro l m ay be in corr ectl y con fi g ur ed. V eri fy s etup ; see Sect ion 4, Advan ced Set up/ PE Option s /PE Apply H W .
PE Series O perat or’s M an u al 58 Op!Npevmft!Bwbj mbcmf T h e prin ter could n ot fin d a va lid m odule ; po ssib le cause s: No m odule is in s talled or con fig ured. W rite Prote ct s witch is ‘On ’. T h e m odule is corrupted. C ycle th e prin ter off an d o n .
PE Seri es Op er at or’ s M an u al 59 SJCCPO!GBVMU T h e s ys tem h as de tecte d a fault in ribbon m otion . T h e ribbon m ay be in correctly in s talled or th e wr ong type for th e p rin te r (em uls ion out), ve rify th a t th e dull s id e ( in m ost cases) is f acin g th e label .
PE Series O perat or’s M an u al 60 UPG!GBVMU Th e pr in ter ’s E dg e Sen sor can n ot see a g ap or n otch in th e la bel s tock. E x am in e th e L abel E dg e Sen sor for obstruction s (for e x am ple, labels s tuck to th e se n s or or dus t blockin g th e s e nso r).
PE Seri es Op er at or’ s M an u al 61 7. 3 Ch aracter Du m p Mo de T h e c h aracte r dum p m ode is a us eful tool f or diag n os in g various prin ter probl e m s, com m un ication problem s , or D PL s yn tax e rror s .
.
PE Seri es Op er at or’ s M an u al A- 1 A ppen di x A ASC II C ont r ol C ha r t Char De c He x Cha r Dec He x Char De c He x Char De c He x NUL 0 00 32 20 @ 64 40 ` 96 60 SO H 1 01 ! 33 21 A 65 41.
PE Series O perat or’s M an u al A- 2 Char De c He x Cha r Dec He x Char De c He x Char De c He x Ç 128 80 á 160 A0 192 C 0 Ó 224 E 0 ü 129 81 í 161 A 1 193 C1 ß 225 E 1 é 130 82 ó 162 A2 19.
PE Seri es Op er at or’ s M an u al B- 1 A ppen di x B Ava ila ble Fonts a nd Bar c ode s All ch aracter f on ts an d bar codes avai labl e w ith th e Pr in ter are des cribed in th is s ec tion . Each fon t an d ba rcode h ave a n a m e associat ed w it h it f or u s e in pr og ram m in g .
PE Seri es Op er at or’ s M an u al B- 2 H uman- R e a da ble Font s F o n t M a t r i x S i zes C h ar ac . Pe r In ch Fo nt Dot He ig h t Dot Widt h Dot Sp acin g 203 DPI 0 7 5 1 33.83 1 13 7 2 22.56 2 18 10 2 16.92 3 27 14 2 12.69 4 36 18 3 9.67 5 52 18 3 9.
PE Seri es Op er at or’ s M an u al B- 3 0 - I den t i fies a 96-ch aracter al ph an u m er i c fon t . 1 - Iden tifies a 145- ch a rac ter u pperc ase an d l ow er cas e al ph an u m er i c fon t th a t i n c lu de s desce n der s an d a scen de rs .
PE Seri es Op er at or’ s M an u al B- 4 6 - I den t i fies a 62-ch aracter al ph an u m er i c u pper cas e fon t. 7 - Id e nti fi e s a fo nt that p r i nts OC R- A, siz e I. 8 - I den t i f i es a f on t t h at p r in ts O CR - B, s i ze III. 9 - I de n tifies th e in te rn al T rium vira te fon t.
PE Seri es Op er at or’ s M an u al B- 5 Bar c ode Fonts Fo n t Bar Co de Length Cksum Valid Char acter s A Code 3 of 9 V ari es No 0-9, A -Z, -. *$/+% and space char. B U P C - A 1 1 d igit s Y e s 0 - 9 C U P C - E 6 d igit s Y e s 0 - 9 D Interl eaved 2 of 5 V ari es No 0-9 E Code 128 (A ,B,C ) V ari es M-103 enti re 128 A SCII character set.
PE Seri es Op er at or’ s M an u al B- 6.
PE Seri es Op er at or’ s M an u al B- 7 Barcode O.
PE Seri es Op er at or’ s M an u al B- 8 Barcode S Barcode T Barcode z.
PE Seri es Op er at or’ s M an u al C- 1 A ppen di x C C a ble Lis ting W h en a seri al in terf ace betw een th e Pr in ter an d h ost is used , a ser ial cabl e m eeti n g s peci fic p in ass ig n m en ts is r equi red.
PE Seri es Op er at or’ s M an u al C- 2.
PE Seri es Op er at or’ s M an u al D- 1 A ppen di x D A p pl i cator P ort Test B ox Th e Appl icat or P or t can be tested an d m on it ored w ith a s im ple t es t circu it.
PE Seri es Op er at or’ s M an u al D- 2.
PE Seri es Op er at or’ s M an u al E- 1 A ppen di x E Erro r Co des T h e m os t c om m on e rror code s tran s m itte d by th e Prin te r are des cribed below . Low e r cas e “c” Prin t er recei ved a dat a by te f rom t h e h ost th at con t ai n s a f ram in g error (co rru pt ed) d u e t o n oise.
E-2 PE Seri es Op er at or’ s M an u al.
PE Seri es Op er at or’ s M an u al F-1 A ppen di x F Pri n ter Sp eci ficat io ns Pr in t in g Prin t Meth od s Direc t th e rm a l or th e rm a l transfer. Pr in t Resolution PE 42: 203 dots per in c h (8 dots/m m ) PE 43: 300 dots per in c h (12 dots/m m ) M a x im um Prin t Speed PE 42: 10 i.
PE Seri es Op er at or’ s M an u al F-2 Elect r ica l Pow e r Suppl y 115/230 V A C, 60/50 H z, 3. 0/1.5A A u t o Ra ngi ng Circuit Pr otec tion 5 A.
PE Seri es Op er at or’ s M an u al F-3 L abel M ateri al Th erm al- tr an sfer plai n -co ated p aper s, vin yl, Mylar, m e ta liz e d pa pe r, n on- w oven fabric, f in e-w oven fabric, th e rm al-visible lig h t sc an n a ble pape r, in frared sc an n a ble pape r, th erm a l ticke t/ta g s toc k, th erm a lly s e n s itive plas tic .
PE Seri es Op er at or’ s M an u al F-4 Pr int e r D imens ions F igur e F -1 Prin t Engine Cr itical Dimensions..
PE Seri es Op er at or’ s M an u al F-5 Med i a Sp ecifi cati on s Figu r e F -2 A ccept ab le M edi a Dim ensi ons Desc r ipt ion M ax. (inches) Mi n . (inches) A L a bel w idth 5.0 1.000 B B a ckin g w idth 5.0 1.000 C Gap be tw ee n labels 99.99 0.
PE Seri es Op er at or’ s M an u al F-6 Me dia a nd R ibbon Bas ic s M edi a S el ecti on - Di rect T herm al Con sider th ree im por tan t f actor s w h en selecti n g dir ect t h erm al sto ck: T h e ab ras ive qua litie s of th e m ate rial th a t c ove rs th e therm a l r eact ive layer of th e pa per.
PE Seri es Op er at or’ s M an u al G- 1 A ppen di x G Me nu Tr e e.
PE Series O perat or’s M an u al G- 2.
PE Seri es Op er at or’ s M an u al H- 1 A ppen di x H Warrant y Inf or ma t ion Dat am ax B ar Code P roducts L i m i ted W a rran ty S t at em en t P E 42/P E43 P rint En gin e Printer Da t a m a .
PE Seri es Op er at or’ s M an u al H- 2 Warrant y Servi ce Pro cedu res I f a defect s h ould occ ur duri n g th e w arran ty pe riod, th e de fective un it s h a ll be re turn ed , freig h t a n d insuran c e prepa id, in th e orig in a l s h ipping con tain ers , to Datam a x at: 4724 Parkw a y Com m erce B lvd.
PE Seri es Op er at or’ s M an u al H- 3 Limita tion of Lia bilit y I n n o even t sh all Dat am ax be li able t o th e pur ch aser f or an y in di rect, spe cia l or con s eque n tial dam ag e s or.
PE Seri es Op er at or’ s M an u al H- 4.
An important point after buying a device Datamax PE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Datamax PE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Datamax PE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Datamax PE you will learn all the available features of the product, as well as information on its operation. The information that you get Datamax PE will certainly help you make a decision on the purchase.
If you already are a holder of Datamax PE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Datamax PE.
However, one of the most important roles played by the user manual is to help in solving problems with Datamax PE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Datamax PE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
