Instruction/ maintenance manual of the product DTT420 Danby
Go to page of 14
Model • Modèle DTT420 For service, contact your nearest service depot or call: 1-800-26- Danby (1-800-263-2629) to recommend a depot in your area. Pour obtenir le service, consultez votre succursale régionale de service ou téléphonez: 1-800-26- Danby (1-800-263-2629) qui vous recommandera un centre régional.
.
1 T ABLE OF CONTENTS Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Cautions regarding use .
2 23 SAFETY INSTRUCTIONS Save these instructions 1. Please read this instruction manual carefully before operating. 2. Refer to the Grounding Instructions in the Installation manual for the proper grounding of the washer .
22 3 SAFETY INSTRUCTIONS CONTINUED 21.Always follow the fabric care instructions supplied by the garment manufacturer . 22. Never operate the washer with any guards and/or panels removed. 23.DONOT operate the washer with broken or missing parts. 24. DONOTby-pass any safety devices.
4 21 P ARTS IDENTIFICATION 1. W ater Inlet 2. Wash timer 3. W ash action selector 4. Drain strainer 5 . Drain selector 6. Spin-tub lid 7. Spin timer 8. Spin-tub inner lid 9. Power cord 10. Spin-tub 1 1. Hose-hook 12. Panel front 13. Drain hose 14. Rub-wash section 15.
20 5 CAUTIONS REGARDING USE Heat Many parts of this washing machine are made of plastic; never place hot or burning objects on or near the washing machine. Using Hot Water Use only water under 50C. If the hot water to be used is 50C or above, first partly fill the washing machine with cold water, and then add the hot water .
6 19 INSTALLATION INSTRUCTION Place of installation Choose a place on a horizontal solid floor. If the machine is installed on an unstable floor, heavy vibration will result during spin. Keep the machine body more than 5 cm apart from the wall surface.
18 7 W ASHING PROCEDURE A) Laundry Guide Up to 1.4 kg 1.4- 2.8 kg Above 2.8 kg Wool, Silk, Polyester Rayon, Thin Clothes Cotton, Linen T -shirts, underwear Heavy soiled cotton Workclothes, Sheets Wool.
8 17 1. Water Level Set the water level properly according to the size of the load to be washed. 2. Drain Valve selection switch Set the drain valve selection switch on “Wash/Rinse” position 3.
16 9 1. Putting in the clothes Put the wet clothes into the spin-tub Distribute the clothes in the tub being sure that they are well balanced. Put the safety cover properly on top of the clothes 2. Closing the lids Close the spin-tub lid and inner lid The machine will not spin if the spin-tub lid is open 3.
10 15 Y ou can improve the rinsing effect and save rinsing water by using an intermediate spin between wash and rinse process: 1. WASH • Operate the wash process as described in wash procedure 2. Drain • Drain the wash-tub by turning the drain valve selection switch to DRAIN position 3.
14 11 BEFORE REQUESTING SERVICE When you suspect your washing machine requires maintenance before calling for service, please check the following points to save unnecessary cost. Y ou may be pleasantly surprised that an apparent malfunction can be easily rectified by following the chart below .
13 LIMITED PRODUCT W ARRANTY This quality product is warranted to be free from manufacturer ’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.
An important point after buying a device Danby DTT420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Danby DTT420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Danby DTT420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Danby DTT420 you will learn all the available features of the product, as well as information on its operation. The information that you get Danby DTT420 will certainly help you make a decision on the purchase.
If you already are a holder of Danby DTT420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Danby DTT420.
However, one of the most important roles played by the user manual is to help in solving problems with Danby DTT420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Danby DTT420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
