Instruction/ maintenance manual of the product DKC445BL Danby
Go to page of 15
Model • Modèle• Modelo DKC445BL For service, contact your nearest service depot or call: 1-800-26- Danby (1-800-263-2629) to recommend a depot in your area.
OWNER’S MANUAL MANUEL D'UTILISATION MANUAL DEL PROPIETARIO Model • Modèle• Modelo DKC445BL CAUTION: Read and follow all safety rules and operating instructions before first use of this product.
T ABLE OF CONTENTS Before putting appliance into use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 W e care for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 BEFORE PUTTING APPLIANCE INTO USE • Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance thoroughly, both interior and exterior.
3 Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
1 Chrome Rail (for attachment to Worktop) 4 Self-Tapping Screws (to attach chrome rail) 1 CO2 Cylinder Support Stand 1 CO2 Cylinder (empty) 1 CO2 Regulator (high/low pressure gauges) 1 CO2 Air Line Ho.
CHILL'N TAP ASSEMBL Y INSTRUCTIONS: 5 1. Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop. See Fig's.
6 CHILL'N TAP ASSEMBL Y INSTRUCTIONS CON’T 8. Installation of CO2 Air Line inside Cabinet: Remove rubber plug located at the exterior (top right hand corner) of the cabinet.
7 CHILL'N TAP ASSEMBL Y INSTRUCTIONS CON’T 1 6 . Installation of the Keg Coupler: IMPORT A N T N O T I C E ; Make sure the black pull handle of the keg coupler is in the "upward" (closed) position before installing on the beer keg. See Fig.
8 HOW TO REPLACE AN EMPTY CO2 CYLINDER 1. Close the main cylinder valve (A) by turning in a clockwise direction. See Fig.13 2. Close the secondary shut-off valve (C) by turning to "horizontal" (east/west) position on lower stem pipe. See Fig.
9 CHANGING THE DIRECTION OF THE DOOR OPENING (SWING) If you find the direction of the door swing on your appliance inconvenient, you can change it to the opposite side. Simply follow the steps listed below . 1. Lay the unit on it's back. 2. Remove the adjustable leveling leg from the lower right hinge.
10 HELPFUL HINTS TO ASSIST YOU IN SERVING THE PERFECT GLASS OF COLD BEER STORAGE AND HANDLING: • Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly .
11 KEG SIZES There are two(2) standard size beer kegs that can be used in your Chill 'N T ap Keg Cooler. 30 Liter Keg (1/4 Barrel) yields 3-1/2 cases (1056ozs) of beer.
12 CONVERTING THE CHILL 'N TAP KEG COOLER T O A BASIC "ALL REFRIGERA TOR": The Chill 'N T ap Keg Cooler is designed to offer you quick and easy conversion from a beer dispensing unit to a basic compact "All Refrigerator" application.
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer ’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer .
An important point after buying a device Danby DKC445BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Danby DKC445BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Danby DKC445BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Danby DKC445BL you will learn all the available features of the product, as well as information on its operation. The information that you get Danby DKC445BL will certainly help you make a decision on the purchase.
If you already are a holder of Danby DKC445BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Danby DKC445BL.
However, one of the most important roles played by the user manual is to help in solving problems with Danby DKC445BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Danby DKC445BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
