Instruction/ maintenance manual of the product DDR3010E Danby
Go to page of 16
Owner ’ s Use and Care Guide Guide d'utiliser et soins de Propriètaire Model • Modèle DDR2510E, DDR3010E, DDR4010E Danby Products Ltd, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc, Findlay , Ohio USA 45840 V .
Thank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort” requirements of your home, cottage, or office. This Owner ’ s Use and Care Guide will provide you with valuable information necessary for the proper care and maintenance of your new appliance.
2 The W ARNING instructions issued in this manual are not meant to cover all possible conditions and situations that may occur . It must be understood that common sense, caution, and carefulness are factors that cannot be built into all appliances. These factors must be supplied by the person(s) installing, maintaining, or operating the appliance.
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of extension cords). If it is absolutely necessary to use an extension cord, use an approved “air conditioner” heavy duty extension cord ONL Y (available at most local hardware stores).
1) LED Readout (ROOM HUMIDITY): The LED window displays the following information independently: A) Internal (Room/Environment) Relative Humidity Conditions B) Set Operating Relative Humidity V alue. NOTE: The LED readout is programmed to default to display the ambient relative humidity conditions.
W A TER T ANK OPERA TION The water tank holds accumulated condensed water and by means of a safety switch, controls both the water level and operation of the dehumidification process- i.e. When the water tank is full and/or accidentally displaced inside the cabinet, the float switch actuator (inside the tank) breaks contact with the safety switch.
DIRECT DRAIN FEA TURE This dehumidifier is inclusive of a direct drain feature, located at the rear of the cabinet. NOTE: The drain hose is not included with the unit. The direct drain feature is intended for use in basements inclusive of a floor drain only .
CARE AND MAINTENANCE CLEANING CAUTION: Before attempting to clean and/or service this unit, always disconnect the power supply cord from the electrical supply outlet. 1) DO NOT use gasoline, benezene, paint thinner , or any other chemicals to clean this unit, as these substances will damage/deform both plastic components and luster finish.
Merci d’avoir choisi un appareil Danby qui vous fournira ainsi qu’à votre famille, le confort au foyer , à la maison, au chalet ou au bureau. Ce manuel d’utilisation vous offre des renseignements pratiques pour le soin et l’entretien de votre nouvel appareil.
Les instructions de sécurité présentées dans ce manuel ne peuvent couvrir toutes les situations qui pourraient survenir . Chacun doit comprendre qui l’utilisation adéquate de l’appareil lui-m.
• Choisir un emplacement approprié, avec accès facile à une prise de courant (éviter l’emploi d’une rallonge). S’il est absolument nécessaire d’utiliser une rallonge pour l’alimentation de l’appareil, utiliser uniquement une rallonge agréé pour climatiseur (disponsible dans la plupart des magasins de quincaillerie).
1) Affichage LED (l’humidité de la chambre): La fenêtre LED affiche indépendamment l’information suivant: A) Les conditions internes (environnement de chambre) de l’humidité relative.
CONSIGNES D’OPÉRA TION (suite) RÉCEPT ACLE À EAU L ’eau condensée générée par la processus de déshumidification s’accumule dans le réceptacle à eau; un contacteur de sécurité empêch.
DRAINAGE DIRECT Ce déshumidificateur comporte une sortie de drainage direct, à l’arrière de la caisse. NOTE: Le tuyau de drainage n’est pas fourni avec l’appareil. Cette fonction permet l’emploi de l’appareil dans un sous-sol comportant un siphon de plancher .
SOINS ET ENTRETIEN NETTOY AGE PRÉCAUTION: On doit toujours débrancher le cordon d’alimentation de la prise de courant électrique avant d’entreprendre une opération de nettoyage ou d’entretie.
Model • Modèle DDR2510E, DDR3010E, DDR4010E For service, contact your nearest service depot or call: 1-800-26- (1-800-263-2629) to recommend a depot in your area. Pour obtenir le service, consultez votre centre de service le plus rapproché ou composez le: 1-800-26- (1-800-263-2629) vous recommendera un centre régional.
An important point after buying a device Danby DDR3010E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Danby DDR3010E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Danby DDR3010E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Danby DDR3010E you will learn all the available features of the product, as well as information on its operation. The information that you get Danby DDR3010E will certainly help you make a decision on the purchase.
If you already are a holder of Danby DDR3010E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Danby DDR3010E.
However, one of the most important roles played by the user manual is to help in solving problems with Danby DDR3010E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Danby DDR3010E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
