Instruction/ maintenance manual of the product DBC128BLS Danby
Go to page of 13
OWNER’S MANUAL CAUTION: Read and Follow All Safety Rules and Operating Instructions Before First Use of This Product. SA VE THESE INSTRUCTIONS! T able of Contents . . . . . . . . . . . . . . . . . . . . 1 Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc.
Important Safety Information Safety Precautions 3 Grounding Instructions 4 Location 4 Operating Instructions Features of Y our Beverage Center 5 The Controls of Y our Beverage Center 6 Setting the T e.
2 WELCOME NEED HELP? W elcome to the Danby family . W e’re proud of our quality products and we believe in dependable service. Y ou’ll see it in this easy-to-use manual and you’ll hear it in the friendly voices of our consumer service department.
READ ALL SAFETY INFORMA TION BEFORE USING 3 IMPOR T ANT SAFETY INFORMA TION W ARNING SAFETY PRECAUTIONS • This appliance must be grounded. Connect only to a properly grounded outlet.
4 This appliance must be grounded. In the event of an electrical short circuit, ground- ing reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding wire with a ground- ing plug.
5 Operating Instructions Features of your Beverage Center 1. T empered Glass Door: T inted for UV protection while still allowing for easy interior viewing. 2. Magnetic Door Gasket: Tight fitting seals retain all the cooling power . 3. Plastic Coated Wire Shelves 4.
6 Operating Instructions The Controls of your Beverage Center T o start the Beverage Center , turn the tempera- ture control to the position corresponding to the desired cooling. The Beverage Center tempera- ture will vary depending on the quantity of cans stored and on the frequency with which the door is opened.
Operating Instructions I n order to achieve the maxi- mum storage capacity of 128 cans, it will be necessary to position the cans in the fol- lowing manner; • T wenty-two (22) cans upright on the top shelf sur- rounding the interior light. • T wenty-five (25) cans upright on each of the center 3 shelves.
Installation Instructions - Door Swing Reversal 8 1. Unplug the unit from the electrical outlet (if con- nected) and lay it on it’s back. 2. Remove the screws from the lower hinge assembly as shown in Figure F . 3. Pull the door downward to remove it from the cabinet of the Beverage Center .
9 Helpful Hints Allow the Beverage Center door to remain open for a few minutes after manual cleaning to air out and dry the inside of the beverage center cabinet NOTE: Be certain the power is of f before cleaning any part of this appliance.
Before Y ou Call For Service If none of the above rectify the situation please contact our customer care department at 1-800-26- (1-800-263-2629) 10 T rouble Shooting Problem Possible Cause What to do No Power . A fuse in your home may Replace fuse or reset circuit breaker .
LIMITED COMP ACT REFRIGERA T OR W ARRANTY T his quality product is warranted to be free from manufacturer ’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer .
Model For service, contact your nearest service depot or call: 1-800-26- y (1-800-263-2629) to recommend a depot in your area. Free Standing Beverage Center T he model number can be found on the serial plate located on the back panel of the unit. All repair parts available for purchase or special order when you visit your nearest service depot.
An important point after buying a device Danby DBC128BLS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Danby DBC128BLS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Danby DBC128BLS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Danby DBC128BLS you will learn all the available features of the product, as well as information on its operation. The information that you get Danby DBC128BLS will certainly help you make a decision on the purchase.
If you already are a holder of Danby DBC128BLS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Danby DBC128BLS.
However, one of the most important roles played by the user manual is to help in solving problems with Danby DBC128BLS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Danby DBC128BLS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
