Instruction/ maintenance manual of the product DAC5110M Danby
Go to page of 16
Owner ’ s Use and Care Guide Guide d’utiliser et soin de Propriètaire Model • Modèle DAC 51 10M, DAC5210M Danby Products Ltd, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc, Findlay , Ohio USA 45840 V3.
Thank you for choosing a Danby Room Air Conditioner to cool your home. This Owner’ s Use and Care Guide will provide you with valuable information necessary for the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation.
READ ALL SAFETY INFORMA TION BEFORE USING 1) All wiring must comply with local and national electrical codes and must be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.
FEA TURES Air FIlter Exterior Air Inlet Cabinet Interior Air Inlet Control Panel Interior Air Inlet 3 INST ALLA TION INSTRUCTIONS ELECTRIC SHOCK HAZARD : T o avoid the possibility of personal injury , disconnect power to the unit before installing or servicing.
LOCA TION A) This room air conditioner is designed to fit easily into a single or double hung window . However , since window designs vary , it may be necessary to make some modifications for safe, proper installation. B) Make sure window and frame are structurally sound and free from dry and rotted wood.
3) Completing the Installation (cont’d) • Carefully place the air conditioner into the window with the “L” shaped mounting bracket (on top) positioned in front of the upper window sash. The bottom of the cabinet should be positioned on the “recessed” portion of the window frame.
CARE AND MAINTENANCE CLEANING: When cleaning the air conditioner , be sure to turn the SELECTOR knob to the “OFF” position and disconnect the power cord fr om the electrical outlet.
Occasionally , a problem may occur that is minor , and a service call may not be necessary . Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly , call .
Nous vous remercions d’avoir choisi un climatiseur de chambre Danby pour refroidir votre logement. Ce manuel d’utilisation et d’entretien fournit les renseignements nécessaires pour prendre soin et entretenir votre nouveau climatiseur de chambre.
T ABLEAU 2 T ypes de fusibles et de réceptacles T ension nominale 120 Ampères 10 Prise de courant Intensité de fusible 15 Fusible temporisé T ype fiche (ou disjoncteur de circuit) LISEZ TOUTE L&ap.
IDENTIFICA TION DE P AR TIE Sortie d’air intérieure Entrée d’air intérieure T ableau de commande Filtre à air Entrée d’air extérieure Caisson Outils nécessaires pour installation T ournevis à tête Phillips et plate Perceuse électrique Mèche de 1/8 po de diam.
ENDROIT A) Ce climatiseur pour chambre a été conçu pour être installé facilement dans une fenêtre à châssis à guillotine simple ou double. Cependant, comme le design de la fenêtre peut varier , it peut être nécessaire d’y faire quelques modifications pour une installation sécuritaire et appropriée.
3) Pour compléter l’installation • Coupez la lisière à calfeutrer en mousse (non adhésif) pour qu’elle se fixe adéquatement au dessous du bas du cadre de la fenêtre. • Placez le climatiseur dans la fenêtre avec le canal de montage en forme de “L” (en haut) positionné à l’avant du cadre supérieur de la fenêtre.
A vant de procéder à l’entretien du climatiseur , assurez-vous de tourner le bouton de SÉLECTION en position “ARRÊT” et débranchez le cordon d’alimentation de la prise électrique.
De temps en temps, un problème peut se poser qui est mineur , et une intervention peut ne pas être nécessaire. Employez ce guide de dépannage pour une solution possible.
Model • Modèle delo DAC 51 10M, DAC5210M For service, contact your nearest service depot or call: 1-800-26- (1-800-263-2629) to recommend a depot in your area. Pour obtenir le service, consultez votre centre de service le plus rapproché ou composez le: 1-800-26- (1-800-263-2629) vous recommendera un centre régional.
An important point after buying a device Danby DAC5110M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Danby DAC5110M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Danby DAC5110M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Danby DAC5110M you will learn all the available features of the product, as well as information on its operation. The information that you get Danby DAC5110M will certainly help you make a decision on the purchase.
If you already are a holder of Danby DAC5110M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Danby DAC5110M.
However, one of the most important roles played by the user manual is to help in solving problems with Danby DAC5110M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Danby DAC5110M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
