Instruction/ maintenance manual of the product MCL-2004(-R) Dakota Digital
Go to page of 10
MAN# 650304:F MODEL MCL-2004 (-R) TANK MOUNT SPEEDOMETER/TACHOM ETER Mo unting: The MCL-2004(- R) is designed to fit in the “Fat Bob” style five inch diameter dash m ount gauge openings.
MAN# 650304:F • Rem ove the dash • Unclip and unplug the factory gaug e • Insure that the rubber gask et is still in the dash or rem ove from factory gauge and place back on dash • Insert new .
MAN# 650304:F • Rem ove the dash • Unclip and unplug the factory gaug e • Rem ove the rubber gasket f rom the factory gauge bez el • Install gasket over the bezel of the Dakota Digital gauge.
MAN# 650304:F Wiring The gauge is a direct plu g in on 2004 and newer bikes . The only wiring, which i s optional, i s for the indicator li ghts and auxiliary pres sure/temp gauges if you choose. POWER Constant battery pow er and key swi tched power are supplied by the stock harnes s.
MAN# 650304:F SPEEDOMET ER SETUP Press and hold the switch while turning the key on and starting the engine. Once the engine i s running, release the switch.
MAN# 650304:F TACHOMETER SETUP The digital tachom eter update rate can be adjusted between slow, mid, and fast. T he rpm warning/shift point can be adjusted from 2000 – 7500 RPM. T he bar graph color can also be changed fr om gr een with a red w arning to red with a green warning.
MAN# 650304:F gEAr gEAr gEAr gEAr Gear Indicator setup This gaug e has a singl e digit displa y for gear p osition . The gaug e can l earn the gear rati os bas ed on s peed a nd rpm s o no senso rs are n eeded, j ust what you’ ve already c onnecte d.
MAN# 650304:F RANGE RANGE RANGE RANGE Distance to Empt y setup The range re ading will initial ly show the word range u ntil a t ank of gas has been d riven to al low the gau ge to co mplete its setup based o n your drivin g. Begin with a full tank of gas an d do not refill i t until it gets below ¼ tank of gas .
MAN# 650304:F FUNCT ION SWIT CH The f unction switch on the side of the dash panel allows access to all of the m ileage, rpm, and perf orm ance inform ation. Pressing and releasing the function switch toggles through the differ ent display s. Press and holding the switch will reset the current display.
MAN# 650304:F Troubleshooting guide Problem Possible cause Solu tion Gauge will not light up. Oran ge/W hite wire does not have power. Inspect and repair stock harness. Brown/Gray w ire does not have powe r. Inspect and repair st ock harness. Black wire is not getting a good ground.
An important point after buying a device Dakota Digital MCL-2004(-R) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital MCL-2004(-R) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital MCL-2004(-R) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital MCL-2004(-R) you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital MCL-2004(-R) will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital MCL-2004(-R), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital MCL-2004(-R).
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital MCL-2004(-R). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital MCL-2004(-R) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
