Instruction/ maintenance manual of the product MCL-2002 Dakota Digital
Go to page of 12
MAN# 650280:D MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOM ETER *To avoid damage to motorcy cle , please see Speedometer, Tachometer, and Status and W arning Indicat ors sect ions for details on loc a.
MAN# 650280:D Mo unting in a Dash with Cable Drive speedom eter and rubber mou nts • Rem ove the dash • Unbolt and unplug the factory gauge • Install the rubber mounts and foam tape around the new Dakota Digital gauge.
MAN# 650280:D • Rem ove the dash • Unclip and unplug the factory gaug e • Insure that the rubber gask et is still in the dash or rem ove from factory gauge and place back on dash • Insert new .
MAN# 650280:D • Rem ove the dash • Unclip and unplug the factory gaug e • Rem ove the rubber gasket f rom the factory gauge bez el. • Install gasket over the bezel of the Dakota Digital gauge. The gask et doesn’t cover the entire bezel; there should be som e chrom e showing when the gasket is installed.
MAN# 650280:D STATUS A ND WA RNING INDICATORS The right turn, left turn, and high beam indicators are activated by 12 volts at their respective hook-up wires. T he right turn signal wire is green, the left turn signal wire is orange, and the high beam wire is purple.
MAN# 650280:D The setup m enus are entered by holding the sw itch in whil e turning the key on. The menus ar e as follows: Men u Description AUTO auto c alibrate speed ADJUST adjus t calib rate spe ed.
MAN# 650280:D S SET S SET S SET S SET Miles to Next Service setup The service mileag e is a countd own mile m eter. The s ervice mi le dis play can be disa bled or can be set to c ount do wn from 50 0 – 750 0 miles . If the service mileag e is en abled a nd it ge ts to 0 miles it will dis play “ S -DvE ” eac h time the ke y is turned o n.
MAN# 650280:D W W W W X X X X Ar n Arn Arn Arn V Voltage warning setup • Press a nd relea se the switch unti l “ WXArn V ” is di splayed, then pres s and hold th e switch un til “ - “ is disp layed. • Release the switch . The curre nt warning po int will be displa yed ( 9 .
MAN# 650280:D SignaL SignaL SignaL SignaL Tach signal setu p • Press a nd relea se the switch unti l “ SignaL ” is d isplayed , then pr ess an d hold t he switch u ntil “ - “ i s dis played. • Release the switch . The curre nt setti ng will be d isplayed ( 12 HI o r 5 LO ).
MAN# 650280:D WIRING CO LOR CODE FO R GAUGE: 2003 and older HD MC L-2002* Stock harness color Function YELLOW PINK or YELLOW /BLUE* tachometer signal PINK BLACK /YELLOW “ENGINE” indicator (-) BLAC.
MAN# 650280:D Troubleshooting guide Problem Possible cause S olution Gauge will not light up. Red wire does not have powe r. Connect to a locat ion that has power. Black wire is not getting a good ground. Connect ground to a diff erent location. Gauge is damaged.
MAN# 650280:D SERVICE A ND REPAIR DAKOTA D IGI T AL offers complete service and re pair of its product line. In ad dition, technical consultation is available to help y ou work through any questions or prob lems you may be having installing one of our p roducts.
An important point after buying a device Dakota Digital MCL-2002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital MCL-2002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital MCL-2002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital MCL-2002 you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital MCL-2002 will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital MCL-2002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital MCL-2002.
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital MCL-2002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital MCL-2002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center