Instruction/ maintenance manual of the product HLY-2000 Dakota Digital
Go to page of 6
VFD DIGITAL INFORMATION SYSTEM Dakota Digital SERIES II The latest in digital technology for the motorcycle enthusiast. INSTALLATION AND OPERATION MANUAL Please read this before beginning installation or wiring. MODEL HLY-2000 SPEEDOMETER/TACHOMETER INFORMATION SYSTEM Dakota Digital 3421 W.
POWER Connect the red wire from the main harness to accessory power from the ignition switch. In addition to powering the display system, this is also where the low voltage detection circuit monitors the electrical system voltage. A good quality, solid state ignition switch should be used.
TACHOMETER The tachometer is used by connecting the yellow wire from the main harness to the negative side of the coil or to an ignition module tach output. The tachometer is adjustable for 1, 2, or 8 cylinder settings. The 1 cylinder setting is used for single-fire ignition systems without a buffered tach output.
NEUTRAL INDICATOR The neutral indicator is activated when the blue wire is grounded. Connect this wire to the neutral switch or to the negative side of the neutral indicator light. When the indicator is activated, a bar on either side of the odometer display will move up and down as shown in the diagram.
WARRANTY All DAKOTA DIGITAL instruments are warranted free of defects in material and workmanship for 3 years from the date of purchase. In the event of a problem with one of our products within the warranty period, DAKOTA DIGITAL will replace or repair the instrument at no charge.
The base system is universal enough to fit in either a new-style, clip-in (1995 or newer) or into the older style, bolt-in. The rubber mounts with studs on both sides are used for the bolt-in style. The L-brackets are used for the clip in style. Mounting hardware and speed sensor connection for the bolt-in system with a speedometer cable.
An important point after buying a device Dakota Digital HLY-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital HLY-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital HLY-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital HLY-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital HLY-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital HLY-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital HLY-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital HLY-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital HLY-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
