Instruction/ maintenance manual of the product CLK-1002B Dakota Digital
Go to page of 4
CLK-1002B rev. A DIGITAL CLOCK TO MATCH VFD-1002B Introduction: The Odyssey gauge series from Dakota Digital, In c. incorporates the reliability and quality of our standard gauges, along with several unique features and easy mounting. These features include: • Quartz accuracy.
Wiring: BLACK - connect to a good ground point in the vehicle. RED - connect to switched 12 volt power point. (An accessory terminal will work for this.) ORANGE - connect to a cons tant 12 volt power point. (This will keep the correct time.) BLUE - connect to the tail light circuit.
Troubleshooting guide. Problem Possible cause Solution Clock will not light up Red wire does not have Connect to a location that has power power. when the key is on. Orange wire does not have Connect to a location that has power power. all of the time.
Technical specifications Minimum operating voltage - 7 volts Maximum operating voltage - 18 volts (operating at or near maximum rating for an extended time can damage unit) Clock accuracy - ± 2 minute per month Typical current draw (@ 13.8V) - 0.13 A Standby current draw (key off) - 0.
An important point after buying a device Dakota Digital CLK-1002B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital CLK-1002B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital CLK-1002B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital CLK-1002B you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital CLK-1002B will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital CLK-1002B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital CLK-1002B.
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital CLK-1002B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital CLK-1002B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
