Instruction/ maintenance manual of the product LCD Display & TV Daitsu
Go to page of 48
LCD Display & TV Operating Instructions.
LCD TV A Wide Array of Screen Settings Y ou can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the lighting or the outside weather conditions). Y ou can switch among the Sport, Movie, Music and Normal options , or you can configure the screen settings yourself.
3 ENGLISH Important Safety Instructions The unit should not be placed in a built-in installation such as a book-case, limited space rack unless proper ventilation is provided. - This may cause fire by overheating or damage the unit by falling. Do not use the unit near water , oil or inflammables.
4 Important Safety Instructions Do not use or store inflammable substances near the unit - This may cause an explosion or fire. Place the antenna away from the electric wire, not to touch even though it falls down by wind. - This may cause an electric shock.
5 ENGLISH ENGLISH T able of Contents Important Safety Instructions ........................................ 3 Unpacking your TV .............................................. 6 Viewing the Control Panels (Front V iew) .................................
6 Unpacking your TV Accessories Remote Control & Batteries (AAA x 2) Please make sure the following items are included with your TV set. If any items are missing, contact your dealer .
7 ENGLISH V iewing the Control Panels Front View Bottom Side Indicator Red Green Status Stand-by Power on Power Indicator Status 1 2 3 4 6 5 MENU selection Input TV/A V selection Channel selection V o.
8 V iewing the Control Panels Rear View Bottom Side 7 8 6 5 1 2 3 4 9 10 11 Headphone Jack A V2 VIDEO Input A V2 AUDIO Input A V2 S-VIDEO Input 1 2 3 4 Right Side 1 3 2 4 Power Inlet with Switch DVI I.
9 ENGLISH V iewing the Control Panels Rear View Headphone Jack A V2 VIDEO Input A V2 AUDIO Input A V2 S-VIDEO Input 1 2 3 4 Right Side 1 3 2 4 Power Inlet with Switch DVI Input (PC) RGB Video Input (P.
10 Remote Control Power On/Off Button Numeric Buttons One/T wo-Digit Channel Selection Favorite Channel Selection (See page 28) Picture Still (See page 31) Sleep T imer (See page 25) Picture Mode Sele.
11 ENGLISH Inserting Batteries in the Remote Control Connecting an Antenna or Cable Y ou must insert or replace the batteries in the remote control when you purchase the TV or when you find that the remote control is no longer operating correctly .
12 Connecting to the RCA or S-V ideo Input ( Side A V2 ) Connecting to the SCART Input Rear of the TV DVD/DTV STB VCR Satellite Receiver Camcorder Video game device (A) SCART to SCART connector (B) SCART to RCA connectors (Video + Audio L/R) (A) For RCA Input 1.
13 ENGLISH Connecting to a DVD or DTV Set-T op Box INPUT (RCA or DVI) 1. Connect the video cables to the Y , Pb, Pr input jacks (COMPONENT1 or 2) on the TV and the Y , Pb, Pr output jacks on the DVD or DTV Set-T op Box.
14 Connecting the Headphones Y ou can connect a set of headphones to your TV if you wish to watch a program without disturbing the other people. (See page 20) 1. Plug a set of headphones into the 3.5mm mini-jack socket on the right side of your TV . Y ou can be heard the sound through the headphones.
15 ENGLISH Connecting the Power Cord and Switching the TV On / Off 1 Make sure all the necessary connections have been made. 2 Press the POWER ( ) button to switch the TV on. 3 Select the favorite source by pressing the TV/A V ( ) button one or more times.
16 Storing Channels in Memory Press the MENU button. Press the ( ¥ ) button to select Install group and press the OK button. Press the ( )button to select Auto T uning , and press the ( ¥ )button to select the country . Then press the OK button for about 3 seconds.
Press the ( )button to select Manual T uning and press the OK button. Press the( ) button to select C (broadcast channels) or S (cable channels) and press the channel number with the number (0~9) buttons. ■ Press the ( ¥ )button to increase or decrease the channel by one.
18 Customizing the Picture Press the MENU button. Press the ( ¥ ) button to select the Picture group and press the OK button. ■ Pre-set mode will be displayed. ■ The picture Mode will change whenever you press the( ) button. Standard : Select when it is bright around the TV .
19 ENGLISH Customizing the Audio Picture Audio Timer Install Setup Option Balance 50 V olume 30 Equalizer SRS WOW On Source Main Picture Audio Timer Install Setup Option Balance 50 V olume 30 Equalizer SRS WOW On Source Main MENU:Previous EXIT :Exit :Move :Position OK:Select Press the MENU button.
Select the Wow Surround feature to amplify the mid-to low-range sound or create surround effect. Selecting WOW Surround 20 Press the ( ) button to select SRS WOW and press the OK button. ■ The options available in the SRS WOW menu are displayed.
Setting the Date & T ime 21 ENGLISH Picture Audio Timer Install Setup Option Clock --:-- Update Pr. On Ti mer --:-- Off Timer --:-- Press the MENU button. Press the ( ) button to select Clock and press the ( ¥ ) or OK button. Press the ( ¥ ) button to move between Date ➔ Month ➔ Y ear .
22 Setting the Preset T ime ( On / Off ) Displaying the Current T ime Picture Audio Timer Install Setup Option :Position /OK:Select Picture Audio Timer Install Setup Option MENU:Previous EXIT :Exit V .
23 ENGLISH Setting Restrictions On Button Input Setting the OSD Display T ime Picture Audio Timer Install Setup Option Local Lock Off OSD Setting No Signal Power Off 20 No Operation Power Off 180 Noise Reduction On Daitsu Engin Press the MENU button. Press the ( ¥ ) button to select the Option group and press the OK button.
24 No Signal Auto Power Off No Key Operation Auto Power Off Press the MENU button. Press the ( ¥ ) button to select the Option group and press the OK button. Press the ( ) button to select No Signal Power Off . Press the ( ¥ ) buttons to adjust the auto power off time.
25 ENGLISH Daitsu Engine Press the MENU button. Press the ( ¥ ) button to select the Option group and press the OK button. Press the ( ) button to select Daitsu Engine and press the OK button. Press the ( ) button to select Off, Low , High mode and demo1, demo2 mode Press the OK button.
Adjusting the Screen Geometry 26 Press the MENU button. Press the ( ¥ ) button to select the Setup group and press the OK button. Press the ( ) button to select the Geometry group and press the OK button. Press the ( ) button to select Auto Geometry Adjust and press the OK button.
Adjusting the Screen Geometry 27 ENGLISH Press the MENU button. Press the ( ¥ ) button to select the Setup group and press the OK button. Press the ( ) button to select the Geometry group and press the OK button. Press the ( ) button to select Phase.
28 W atching your Favorite Channels Factory Preset Press the MENU button. Press the ( ¥ ) button to select the Setup group and press the OK button. Press the ( ) button to select Factory Preset Press the OK button. ■ The Audio and the Video setting will be reset to the factory default settings.
29 Display the Picture in Picture ( PIP ) ENGLISH Press the PIP ( ) button. There are 2 modes of window : PIP , POP Whenever you press this button, PIP window mode will be changed.
Display the Picture in Picture ( PIP ) 30 Changing the PIP Size Press the ( ) button on the remote control. ■ The PIP will change free dif ferent size whenever you press ( ) or ( ¥ ) button. 1 Selecting the image size In the PIP Press the ( ) button on the remote control.
Changing the Picture Size Display a Still Image 31 ENGLISH Press the ( ) button on the remote control. ■ When you are viewing the Main image: The image will change as shown below whenever you press this button. ( Auto ➔ Normal ➔ Full ➔ Zoom 1 ➔ Zoom 2 ➔ Panorama ) 1 Press the Still ( ) button on the remote control.
T eletext Functions Displaying the T eletext Information 32 The T eletext page of most TV channels provide information such as TV programme times, News bulletins, Weather forecasts, T ravel information, or Sports results. Functions of the teletext Part Display Contents A Selected page number .
Selecting a Special T eletext Functions 33 ENGLISH Selecting a Special T eletext Functions MENU Functions REVEAL Displays concealed text such as answer to quiz games. T o return to normal viewing, press this button again. SUB-P AGE Displays a secondary page by entering its number .
34 Connecting to the PC (DVI) T urn the PC on. Press the PC or ( ) button on the remote control to select the PC. Set up the PC software. (See page 35) Adjust the screen in PC Mode.
35 ENGLISH Setting the PC Software First, click on Settings on the Windows Start menu and click on " Control Panel ". Double click on the Display icon. Click on the Settings tab on the display dialog-box. Adjust the resolution up to 1366 x 768 pixels.
36 RS-232C Configurations Serial Link Command Power on/off control 0=standby , 1=on Main A V Input selsection 1=TV , 2= SCART1/ 2 , 3=A V2, 4=Component1, 5=Component2, 6=DVI PIP A V Input selection 1=.
37 ENGLISH Standard Display Mode If the signal from the system equals the standard signal mode, the screen will adjust automatically . If the signal from the system does not equal the standard signal, adjust the display mode as shown below referring to your video card instructions.
38 Pin Configuration Pin Signal Assignment Pin Signal Assignment 1 T .M.D.S Data2- 2 T .M.D.S Data2+ 3 T .M.D.S Data2/4 Shield 4 T .M.D.S Data4- 5 T .M.D.S Data4+ 6 DDC Clock 7 DDC Data 8 No Connect 9 T .M.D.S Data1- 10 T .M.D.S Data1+ 1 1 T .M.D.S Data1/3 Shield 12 T .
39 ENGLISH T roubleshooting No picture or sound. Screen is black. Picture is OK but there is no sound. Poor sound quality . No image on a specific channel. Image is not stable and may appear to vibrate , horizontal bars appear . No color on a specific channel (a black & white image).
40 T roubleshooting "No signal" message "Out of range" message Picture rolls down vertically . A shadowed area appears on the screen. The image is too large or too small. Horizontal or vertical bars appear on the screen. The power indicator light blinks green.
41 ENGLISH Specifications ☛ ☛ Design and specifications are subject to change without notice. Size Display Size Pixel Pitch Pixel Number T ype Brightness Contrast Ratio Viewing Angle Colour System Sound System Video System Y / Pb / Pr Video Input Audio Input RGB Input Display Colour Max.
42 Specifications ☛ ☛ Design and specifications are subject to change without notice. Size Display Size Pixel Pitch Pixel Number T ype Brightness Contrast Ratio Viewing Angle Colour System Sound System Video System Y / Pb / Pr Video Input Audio Input RGB Input Display Colour Max.
43 ENGLISH Specifications ☛ ☛ Design and specifications are subject to change without notice. Size Display Size Pixel Pitch Pixel Number T ype Brightness Contrast Ratio Viewing Angle Colour System Sound System Video System Y / Pb / Pr Video Input Audio Input RGB Input Display Colour Max.
Memo 44.
45 ENGLISH Memo.
Memo 46.
47 ENGLISH Memo.
P/N :.
An important point after buying a device Daitsu LCD Display & TV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daitsu LCD Display & TV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daitsu LCD Display & TV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daitsu LCD Display & TV you will learn all the available features of the product, as well as information on its operation. The information that you get Daitsu LCD Display & TV will certainly help you make a decision on the purchase.
If you already are a holder of Daitsu LCD Display & TV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daitsu LCD Display & TV.
However, one of the most important roles played by the user manual is to help in solving problems with Daitsu LCD Display & TV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daitsu LCD Display & TV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
