Instruction/ maintenance manual of the product 552 Dahle
Go to page of 9
@ @ O @ O @ @ @ @ @ @ @ Bedien ungsan leitung @ 0 perati ng i nstructions @ Instructions de service @ Manual de instrucciones @ Istruzioni per fuso @ Manual de instruqöes @ Gebrui ksaanwijzing @ Betj.
http://www.monomachines.com http://www.monomachines.com DAHLE 550, 552, 554, 556, 558, 750 4 12 11.
Anderungen @ Technical to change notice, @ Technische vorbehalten data is subject without O Sous röserve techniques de modifications @ Dahle se reserva de modificar, aviso, el derecho sin previo los datos tecnicos del producto. O I dati sono a modifiche preavviso.
ROLL + SCHNITT SICHERHEITSSCHNEIDEMASCHINEN SICHERHEITSHINWEISE Die Schneidkanten des rotierenden Rundmessers am Messerkopf (6) und des Untermessers (8) dürfen wegen großer Verletzungsgefahr nicht berührt werden. DAHLE-Sicherheitsschneidemaschinen erfüllen die strengen Sicherheitsvor- schriften der Berufsgenossenschaften.
Vor Bedienung der Sicherheitsschneidemaschinen Sicherheitshinweise beachten. 2. BEDIENUNG ACHTUNG: Überschreiten der angegebenen Schnitthöhe oder Schneiden von ungeeigneten Materialien führt zur Beschädigung des Rundmessers. Zur Nutzung der ganzen Schnittbreite Messerkopf (6) gegen eines der beiden Seitenteile (4) schieben.
ZUBEHöR Modell Untergestell Bestell-Nr. DAHLE 556 00.06.00696 DAHLE 558 00.06.00698 Modell Rollenhalter Bestell-Nr. DAHLE 550 00.00.00649 DAHLE 552 00.00.00652 DAHLE 554 00.00.00654 DAHLE 556 00.00.00656 DAHLE 558 00.00.00658 -6- http://www.monomachines.
ROLL + CUT SAFETY SHEARING MACHINES SAFETY INSTRUCTIONS The cutting edges of the rotating round knife at the knife head (6) and of the lower knife (8) must not be touched because of the great danger of injury. DAHLE safety shearing machines meet the strict safety regulations of the employer's liability insurance associations.
Follow safety instructions prior to operation of the safety shearing machines. 2. OPERATION CAUTION: Exceeding the specified cutting height or cutting unsuitable material leads to damage of the round knife. To use the entire cutting width, push knife head (6) against of the two side sections (4).
ACCESSORIES DAHLE 556 Roll-holder Order no. 00.00.00649- 00.00.00652 -9- http://www.monomachines.com http://www.monomachines.com 5. ACCESSORIES DAHLE 550, 552, 554, 556, 558, 750 III Model Roll-holder Order no. DAHLE 550 00.00.00649 -- ------_.-- DAHLE 552 00.
An important point after buying a device Dahle 552 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dahle 552 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dahle 552 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dahle 552 you will learn all the available features of the product, as well as information on its operation. The information that you get Dahle 552 will certainly help you make a decision on the purchase.
If you already are a holder of Dahle 552, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dahle 552.
However, one of the most important roles played by the user manual is to help in solving problems with Dahle 552. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dahle 552 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
