Instruction/ maintenance manual of the product FR-330 Daewoo
Go to page of 13
Service Manual Refrigerator Model: FR- 330 D AEWOO ELECTR ONICS CO., L TD . S/M No. : FR 33 0 0 001 1 ✔ Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information,please refer to PPL(Parts Price List) in Service Information Center (http://svc.
contents 1. SPECIFICA TION ......................................................................................1 2. NAME OF P AR TS .....................................................................................2 3. REFRIGERANT CYCLE DIAGRAM .
1.Specification Refrigerant R134a COOLING System Refrigeration System Defrost System Defrost Operation Cold Control Freezer Refrigerator Total Height Width Depth Net Weight -1- 207L 268L 100g Fan Cool.
2. NAME OF PARTS -2-.
3. REFRIGERANT CYCLE DIAGRAM -3-.
NO PART NAME NO PART NAME NO PART NAME 1 BASE CAB AS 7 WI-CON PIPE 13 BASE COMP AS 2 COMPRESSOR 8 DRYER AS 14 BRACKET EARTH 3 P-RELAY AS 9 PIPE SUC AS 15 POWER CORD AS 4 PIPE VAPORI AS 10 PIPE SUC CONN 16 ABSORBER PIPE A 5 ABSORBER PIPE B 1 1 BOX POWER AS 6 PIPE HOT 12 HARNESS EARTH 4.
(1) Freezing room louver 1) Unscrew, remove the F-louver by pulling forward with inserting screwdriver into the hole of F louver. 2) Assemble it by pressing triangle shape ( ) by hand. (2) R control box 1) After pressing both bottom surfaces of shade and pull forward.
Methode of exchanging main parts 4) Pull slightly forward with instant force. 5) Remove the housing 6) After romoving the control switch knob and two screws for fixing control switch, change the control switch to new one.
Methode of exchanging main parts (3) Bimetal 1) Cut off the wire bind. 2) Take out the bimetal. (4) Glass tube heater 1) Remove 2 screws that fasten the evaporator. 2) Slightly pull the evaporator to the arrow's direction. 3) Move the entire eveporator upward the pipe center to the arrow's direction.
Methode of exchanging main parts 4) Cut the both ends of glass tube heater tube heater lead wires and insulate and seal lead tip remaining in refrigerator with tape etc. 5) Pull out the glass tube heater from the heater supporter with heater covers remaining.
6. EXPLODE VIEW AND PARTS LIST 1. Expoloded views SPAIN DESPA (DAEWOO,FR-330).
NO PART CODE PART NAME DESCRIPTION Q'TY REMARK 1 - ASS'Y CAB URT HCFC-141B 1 2 4019R54111 GUIDE DRN AL 1 3 3012800501 HEATER GLAS AS 150W 1 4 4019R73571 COVER DEFR HTR *T GALVANIED 1 5 4019R.
NO PART CODE PART NAME DESCRIPTION Q'TY REMARK 46 3012624000 HANDLE F A ABS 1 A TYPE 47 3011610810 DECO F HNDL AS 1 A TYPE 48 3019015700 POCKET F *T GPPS 1 49 3019015800 POCKET F *U GPPS 1 50 - A.
An important point after buying a device Daewoo FR-330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo FR-330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo FR-330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo FR-330 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo FR-330 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo FR-330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo FR-330.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo FR-330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo FR-330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
