Instruction/ maintenance manual of the product DWDF1251 Daewoo
Go to page of 24
INSTRUCTION MANUAL DWD-F1021/1022/1023/F1221/1222/1223’S W ashing Machine Instruction Manual CONTENTS Page A NOTE TO YOU Thank you for buying a DAEWOO appliance.
2 P ARTS AND FEA TURES The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer .
3 Save these instructions Y our safety is important to us. T o reduce the risk of fire, electrical shock, or injury when using your washer adhere to the following basic precautions. Understanding your responsibilities • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash.
4 Removing transit bolts 1. Before operating the washer , remove the transit bolts(3ea) along with the rubber . • If the bolts are not removed, it may cause heavy vibration, noise and malfunction. 2. Unscrew the 3 bolts with the 10mm hex wrench or spanner or cross-tip screwdriver .
5 The washer should be connected to the water mains using new hose sets and old hose sets should not be reused. In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve. Option : Be careful not to confuse hot water inlet and cold water inlet.
6 ELECTRICAL REQUIREMENTS • Electrical earth is required on this washer • If it does not fit the outlet, have a proper outlet installed by a qualified electrician. • Don ’ t earth to a gas pipe. • Don ’ t change the power supply cord plug.
7 OPERA TING YOUR W ASHER 2 Adjust the level of washer using adjustable legs. • Please check if there is any gap between the four adjustable legs and the floor . • Adjust the level of washer by turning adjustable legs. And make it sure that there is no swaying of washer .
8 • Drop items into washer loosely . Items should move easily through wash water for best cleaning and wrinkle-free results. • Load washer properly and select correct load size setting.
9 Press this switch to turn the power on or off. Operation and temporary stop is repeated as it is pressed. When you want to change program in operating; press the “ Start/Hold ” button → Select the program that you want to change → press the “ Start/Hold ” button again.
10 1. COTTON IS AUTOMATICALLY SELECTED UPON POWER ON • Press the Power button to start. • Press the Start/Hold button • Initial condition - Program : Cotton - Wash : main wash - Rinse : 3 times - Spin : 800 rpm - Water temperature : 40 ˚ C W ASHING PROCEDURE AND PROGRAM SELECTION 2.
11 4. FUNCTION • Recommended programs according to the laundry type • Pre Wash : If the laundry is heavily soiled, “ Pre Wash ” program is recommended. Pre Wash is available in Cotton and Synthetic programs. • Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
12 * COTTON PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • ‘ 30 ’ , ‘ 40 ’ , ‘ 60 ’ and ‘ 95 ’ ˚ C washing temperatures are selectable with Cotton program.
13 * ECO PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ 60 ’ ˚ C washing temperature is selectable with Eco program. • Only ‘ Rinse+ ’ and ‘ Crease Care ’ of all wash options are selectable with Eco program.
14 * SYNTHETIC PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ 30 ’ , ‘ 40 ’ and ‘ 60 ’ ˚ C washing temperatures are selectable with Synthetic program.
15 * DELICATE PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ cold ’ of washing temperature is selectable with Delicate program. • ‘ 1000 ’ rpm of spin velocity is NOT selectable with Delicate program.
16 * WOOL PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ Cold ’ washing temperature is selectable with Wool program. • ‘ 1000 ’ rpm of spin velocity is NOT selectable with Hand program in order to protect damage on laundry.
17 * HAND WASH Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ Cold ’ and ‘ 30 ’ ˚ C washing temperatures are selectable with Hand Wash program.
18 * QUICK 30 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘ Cold ’ , ‘ 30 ’ ˚ C and ‘ 40 ’ ˚ C washing temperatures are selectable with Quick 30 program.
19 MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely . Cleaning your washer Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer .
20 HOW T O CLEAN THE FIL TER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. Cleaning the drain filter • This drain filter is used to screen the foreign stuf fs such as threads, coins, pins, buttons etc.
21 Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soil before washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry .
22 TROUBLE SHOOTING Most problems are easily solved if you understand the cause. Check the following list for problem before calling for service. If the error mode such as IE, OE, UE were displayed on the control part, in order to solve these problem, first turn of f the power of the washing machine and then turn on the power pressing Power button.
23 Dimension (mm) Maximum mass of textile (kg) Unit Weight (kg) Standard W ater Consumption Spin Speed (RPM) Operating W ater Pressure 595 x 540 x 850 (WxHxD) 6.
담 당 이승준부장님 TEL MODEL DWD-F1021/1022/1023/F1221/1222/1223’ S BUYER ( ( 영 영 어 어 기 기 본 본 ) ) - - B B A A S S I I C C _ DWD-F1021/1022/1023/F1221/1222/1223’ S 1차 6차.
An important point after buying a device Daewoo DWDF1251 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DWDF1251 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DWDF1251 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DWDF1251 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DWDF1251 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DWDF1251, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DWDF1251.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DWDF1251. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DWDF1251 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
