Instruction/ maintenance manual of the product DTS - 42 Daewoo
Go to page of 79
PLASMA TELEVISION USER MANUAL DTS-42 Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings.
4 This User Manual presents safety precautions and how to use the product. After reading it thoroughly , use the product safely . Keep this manual where the user can see it easily . Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury .
FCC RF INTERFERENCE ST FCC RF INTERFERENCE ST A A TEMENT TEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the TV .
7 Do not open the cover (or back) because high voltage is present within the TV enclosure. It may cause electric shock. Never push any kind of objects into this product through openings at the back of TV.
8 Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. Safety Precautions Power Installation CAUTION Y ou can be injured, or this product or any other of your property can be damaged if you don’t follow instructions.
9 9 During Use Do not wipe the TV using a cloth damped with chemicals (benzene, thinner, etc.). TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place any object or cover on the TV. In an event of improper ventilation, the TV will be overheated causing fire.
10 VIDE O/ DVD S AT TV CATV DISP LAY MU LTIM ED IA T V/VIDEO CH CH V O L V O L Z O O M + Z O O M - M ENU P R E V C H S C R E E N S I Z E M U TE C APTIO N F.
11 Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Optional Accessories T able T op Stand Speakers DTS-42SP - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.
.
13 6 • Safety Precautions 10 • Checking Accessories 14 • Panel Controls 15 • Remote control 16 • Remote Control Setup PREP ARA TION CONNECTION 17 • Antenna Connection 20 • T o Watch TV 2.
Panel Controls 14 Front Panel, Back Panel, Remote Control * Items having same names on Plasma television and the remote control would function in exactly the same way . Front Rear ON/OFF • Power control sensor • Power Standby: Red - Standby Green - ON • Power button Select when adjusting volume or select/adjust “ MENU.
15 Remote Control When Using Remote Control: • Be sure not to allow the Remote Control to drop or to become wet. • Keep it away from hot or moist locations.
16 Remote Control Setup - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control.
Antenna Connection 17 1. Connect the feeder cable of the antenna to the combining adapter . 2. Connect the combining adapter to the antenna input at the back of the TV set. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection.
CTV Antenna Connection 18 TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fi x it fi rmly.
19 Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. Separate Antenna Connection.
T o W atch TV 20 - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
21 Press the “ON/OFF” button. POWER • Press the “ON/OFF” button of the PDP set. • The main power lamp turns on in red color. • Press the "POWER" button of the remote control or any button in the keypad of the main body. • The LED of the PDP set turns on in “green” color and the set turns on.
Channel Setup 22 VIDEO / DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E M UTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE PIC P O W E R - This is the function for the TV to memorize the broadcasting channels.
23 Select the [Auto Search]. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select the “ Auto Search ” with the “ CH ” button.
Additional Channel Memory • This is method for additionally memorizing channels not memorized due to weak broadcasting signal. • This function is available even in the [Menu] - [Channel] - [ADD/ERASE].
25 Erase of Memorized Channel • This is function to erase unnecessary memorized channel. • This function is available even in the [Menu] - [Channel] - [ADD/ERASE]. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
26 Fine T une - If you are unable to get a good picture or sound because of a poor signal reception, it is possible to adjust it with the Fine Tune feature.. VIDEO / DVD SA T TV CA TV DISPLA Y M UL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E M UTE CAPTION F .
27 Select “Air/Cable” in [Ch Mode]. • This function is used for selecting “ Air TV ” and “ Cable TV ” • The screen is changed to “ Air TV ” and “ Cable TV ” whenever pressing the “ VOL ” button.
W atching Digital Broadcasts • T o watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET -TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right.
29 Input Select MUL TIMEDIA • Select [Component 1 or Component 2] by pressing the “ Multimedia ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ Multimedia ” button, different input modes appear .
W atching Cable Broadcasts • T o watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then connect a cable Broadcasting Receiver TV to the PDP as shown right.
31 Input Select TV/VIDEO • Select [Video 1 or Video 2] by pressing the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, different input modes appear.
W atching Satellite Broadcasts • T o watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect satellite Broadcasting Receiver to the PDP as shown right.
33 Input Select TV/VIDEO • Select [Video 1 or Video 2] by pressing the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press “ TV/VIDEO ” button, a different input mode appears.
W atching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y , Pb/Cb, Pr/Cr) to the Component Input at the back of PDP , and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP .
35 Input Select MUL TIMEDIA • Select [Component 1 or Component 2, Video1, V ideo2] by pressing the “ MUL TIMEDIA ” or “ TV/VIDEO ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP set. • Each time you press the “ MUL TIMEDIA ” or “ TV/VIDEO ” button, a different input mode appears.
W atching a VCR Image • V ideo can use either the video terminal or the S-video terminal. W atching a VCR Image 36 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
37 Input Select TV/VIDEO • Select [V ideo 1 or Video 2] by pressing the “ TV/VIDEO ” button of Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, a different input mode appears.
W atching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP . W atching a Camcorder/Game Console Image 38 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
39 Input Select TV/VIDEO • Select [V ideo 1 or Video 2] by pressing the “ TV/VIDEO ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, a different input mode appears.
Connecting PC • This product supports resolution of VGA, SVGA, XGA, and SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. Connecting PC(15pin D-sub) 40 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
41 Input Select MUL TIMEDIA • Select [PC] by pressing the “ MUL TIMEDIA ” button of the Remote Control or PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen TV by Using PC’ s Keyboard or Mouse.
Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC.
43 Input Select MUL TIMEDIA • Select [DVI] by pressing the “ MUL TIMEDIA ” button of the Remote Control or PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen TV by Using PC’ s Keyboard or Mouse.
44 PC and DVI Input Resolution A vailable in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark DVI PC 37.
Selecting Picture Mode • Select the Picture mode that is appropriately set depending on the kinds of pictures, and enjoy them. Selecting Picture Mode PICTURE MODE • Press the [PICTURE MODE] on the Remote Control. • While pressing the [PICTURE MODE] for the fi rst time, the current PICTURE MODE will be displayed.
Customizing Picture • Y ou can adjust the color tone and brightness to your preference. Customizing Picture 46 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
Select User Mode Adjustments Picture Condition Adjustments • Press the “ VOL ” buttons to adjust the picture at your preference. 4 5 Move Adjust MENU Exit Normal 30 60 40 32 48 Picture Screen Sound Features Channel Mode Brightness Contrast Color Tint Sharpness Color T emp.
Adjusting Screen Size • Y ou can adjust screen size or aspect ratio as desired. Adjusting Screen Size 48 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
49 Press the MENU Button. • Press the [MENU] button on the Remote Control. Select [Screen]. • Press the Channel “ CH ” button to select [Screen]. Select the [Screen Size]. • Enter the sub menu by pressing “ VOL ” button. • Press the V olume “ VOL ” buttons to select [Screen Size].
Adjusting Screen Position and Size • Y ou can adjust the screen position and size as desired. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .
51 Press the V olume “ V O L ” button. • Press the V olume “ VOL ” button to enter the sub menu of [Screen]. • While you are in [Screen] mode, press the “ CH ” button to select a desired item, and then, adjust the value by pressing the “ VOL ” .
VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERASE SLEEP Press the “ZOOM+” Button.
Move the Screen Position. • While you are in the ‘ Zoom ’ mode, press the “ CH ” and “ VOL ” buttons to move screen stepwise up/down and left/right, respectively . 2 53 NOTES: 1) When the screen is enlarged, the pixel of the screen can become thick and dim.
VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERASE SLEEP Press the “STILL” Button.
Adjusting Auto Sound Mode • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Adjusting Auto Sound Mode 55 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .
Customizing Sound Mode • This feature allows the user to adjust at his preference. Customizing Sound Mode 56 Press the “ C H ” button. • Select [Sound] by pressing the “ CH ” button, then press the “ VOL ” button to display the following.
Select the Effect Mode. • Select [Ef fect] by pressing the “ CH ” buttons, then select ON/OFF by pressing the “ VOL ” button. • [Effect]: Used to emphasize stereo ef fect. Select the Sound Mode. 4 5 Move Adjust MENU Exit Mono Off Normal 0 0 0 0 0 Picture Screen Sound Features Channel Balance Effect MTS AV C Mode 120Hz 500Hz 1.
Selecting INPUT SIGNAL 58 Press the INPUT SELECT Button. MUL TIMEDIA TV/VIDEO • Press the “ TV/VIDEO ” and “ MUL TIMEDIA ” button on the Remote Control or the PDP Display to select desired input signal. • Each time you press the “ TV/VIDEO ” or “ MUL TIMEDIA ” button, a different screen mode appears.
59 NOTES: 1) If an external device is not connected or INPUT signal is not applied, W arning Message ( “ No Signal ” ) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done. 3) Also, you can select input using [INPUT SELECT] button in the keypad of the pdp set.
Checking the Current Input Signal • Used to check the INPUT signal mode, resolution, frequency(video only), etc. of the current screen. Checking the Current Input Signal 60 Press the “DISPLA Y” Button. DISPLA Y • Press the “ DISPLA Y ” button on the Remote Control.
Menu Background and Language Settings • Used to select transparent of MENU background and language used in MENU. Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below .
VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .
63 MGDI Demo • When [MGDI] is set to Demo mode, Half of screen is [MGDI] ON and the other half is [MGDI] OFF . • As [MGDI] is of f, the sharpness of the Picture mode cannot be controlled. Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below .
POWER/ST ANDBY Indicator Front panel LED lights • When the AC power is on : Green. • When the AC power is in the standby mode : Red. 64 Auto Power Setting Auto Power Setting • Select the [Auto Power] by pressing the “ CH ” button from [Features].
Closed Caption Setting CAPTION • Press the “ CAPTION ” button on the Remote Control. • Whenever pressing the “ CAPTION ” button, caption mode is changed as follow. Closed Caption Setting in the Menu. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Press the Menu Button.
Caption Box Setting • Black : Background of the caption box is black. • T ransparent : Background of the caption box is T ransparent. 66 Closed Caption Setting Select Features CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select [Features] by pressing the “ CH ” button.
Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select [Features] by the “ CH ” button.
Clock(current time) Setting • The “ Current time ” must be set up ahead of setting up other time memories. 68 T ime Setting Off Time and W ake T ime settings. • Select Functions by pressing the “ CH ” button. First, set [Clock]- current time, and then Y ou can setup off-time and wake time.
ISM • Image sticking minimization. • Displaying a still image like PC input for a long time causes part image sticking in the panel • The ISM function minimize this effect.
70 Image Sticking Minimization(ISM) Select Functions. • Every press of the “ VOL ” button after select function by the “ CH ” button would switch between ON/OFF .
Parental Lock • When “ Parental Lock ” is on, the locked channels are not available on the screen. Parental Lock Setting 71 Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below .
New Password setting New Password setting menu is displayed at fi rst use. Set New Password for using Parental Lock menu. 72 Parental Lock Setting Press “Password”. • Press Password by using number 0~9. Caution) If using your password, remember it.
73 MUTE Move Select MENU Exit Picture Screen Sound Features Channel Parental Control Parental Lock TV GuidLines Movie Retings No Ratings Ext. Sources Change Password Unblock Off Block • Rating of movie is setup even in movie, videotape and other media objects including TV program.
74 Parental Lock Setting “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “ VOL ” button after selecting password, the second screen of below drawing appears.
75 Back to Initialization • Y ou can restore the values of the adjustment setting made in the MENU to factory settings. Initialize Setting Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below .
76 When [INITIALIZA TION] is completed: 1) When [INITIALIZATION] is completed, those values that have been set in the User Mode of [SCREEN MODE] and [SOUND MODE] will be returned to the factory preset values. 2) Once initialized, you can not undo. 3) The items in the [SCREEN] Menu in PC or DVI INPUT are also initialized (i.
77 Setting Sleep Timer • SLEEP TIMER turns the PDP off after a preset time. Press the “SLEEP” Button. SLEEP • Press the “ SLEEP ” button on the Remote Control. • Pressing the “ SLEEP ” button fi rst time will display the current setting for SLEEP TIMER.
Before Requesting Service 78 Before Requesting for Service St yo mm ps C h e c k s A c t i o n • There are empty spots at the top and the bottom area of the screen. • Check if the screen size of an image is wider than 16:9 aspect ratio (theater screen size).
79 SPECIFICA TIONS In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry it in a shadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and damage of the product.
An important point after buying a device Daewoo DTS - 42 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DTS - 42 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DTS - 42 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DTS - 42 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DTS - 42 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DTS - 42, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DTS - 42.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DTS - 42. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DTS - 42 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
