Instruction/ maintenance manual of the product DSB-122L Daewoo
Go to page of 20
MODEL #: DSB-122L/DSB-122LH O WNER'S MANU AL SPLIT AIRCONDITIONING SYSTEM S1 DSB-122L/122LH(영 어 ) 01.8.17 5:29 PM 페이지2 0.
This air conditioner meets strict safety and operating standards. The installer of this unit must install or service this unit so it operates safely and efficiently.
CONTENTS 2 It is recommended that you read the Installation and Operating instructions fully before installing and/or operating this unit. Safety Instructions ............................................................................................
This Installation section explains how and where to connect this new air conditioner. Please read make sure all acces- sories are included as shown below and read manual thoroughly.
OPTION AL A CCESSORIES 4 1 2 6 3 8 7 5 4 A CCESSORIES NO T SUPPLIED WITH THE UNIT : No. Description Part No. Qty Material Size 1 Drain Hose Extension 3103200200 1 PVC ID19.
5 LOC A TION OF CONTROLS Electrostatic Filter Removes dust particles from the air. Air Cleaning Filters Removes dust and prohibits germs. Emergency/Remote Switch Slide to select the desired position. Indicators Indicate the setting Sensor Wire (DSB-122LH Only) Remote Controller Storage Deodorizing Filter Removes bad smells from the air.
6 INDOOR UNIT ■ Remote Control Signal Receiver This place is the part to receive the signal if it receive the signal, you can hear the signal “ beep ” . ■ When the remote controller is lost or out- of-order, push the emergency button (EMERGENCY) to operate by hand.
7 MODE SLEEP ON/OFF TIMER ENTER/ CANCEL FAN SPEED TURBO/MILD Display Displays information pertaining to unit. TURBO/MILD Press to be colder the unit. TIMER ENTER/CANCEL Button Press to enter a timer setting or to cancel timer setting TIMER ON/OFF Button Press to set the unit of or on time.
8 DSB-122LH MODE SLEEP ON/OFF TIMER ENTER/ CANCEL FAN SPEED TURBO/MILD Display Displays information pertaining to unit. TURBO/MILD Press to be colder the unit. TIMER ENTER/CANCEL Button Press to enter a timer setting or to cancel timer setting TIMER ON/OFF Button Press to set the unit of or on time.
9 OPERA TION 1. Insert the at- tached AC plug into a pronged 220V AC outlet. AC Outlet and Plug NO TES: • Never connect the AC line cord plug to other than the specified voltage (220V). • Use the attached power cord only. • The new air conditioner system should be on it ’ s own 220V circuit.
10 CELSIUS T O F AHRENHEIT CONVERSION CHART CELSIUS FAHRENHEIT 18 64.4 19 66.2 20 68 21 69.8 22 71.6 23 73.4 24 75.2 25 77 CELSIUS FAHRENHEIT 26 78.8 27 80.6 28 82.4 29 84.2 30 86 31 87.8 32 89.6 NO TES: • When operating the remote controller, make sure there are no obstructions between the remote controller and the re - mote sensor.
11 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ ON ” will light in the remote display. 2. Make sure the AUTO indicator appears in the remote display. Using the TEMP. ▼ or ▲ buttons, set the desired temperature.
12 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ ON ” will light in the remote display. 2. Press the MODE button until the Fan indicator appears in the display. No allowance setting temperature 3.
13 FAN SPEEDS “ AUTO ” The fan will automatically select the fan speed. “” The fan will operate on low speed. “” The fan will operate on medium speed. “” The fan will operate on high speed. “ NATURAL ” The fan will randomly cycle through the speeds simulating a cool breeze.
14 2. While the unit is off, press the TIMER ON button; the display will light waiting input for the timer, but the actual unit will not turn on. 3. Repeatedly press the TIMER ON button until the de - sired hour that you want the unit to turn on appears on the display.
15 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ ON ” will light in the remote display. 2. Press the MODE button to select the desired mode. Then, set the desired temperature using the TEMP.
16 CHANGING/CLEANING THE AIR FIL TERS To change or clean the two black air filters, follow the procedures below: 1 . Open the indoor unit ’ s cover and remove both black air filters by bending them slightly backward and the lifting out. 2 . Remove the two small filters (Deodorizing and Electrostatic) from the indoor unit.
C ARE AND MAINTEN ANCE 17 Clean the casing and front of the indoor unit with a vacuum brush or wipe with a clean damp cloth. • NEVER USE Solvents, harsh chemicals or hot water to clean the unit. • Some metal edges on the unit are sharp. Be careful when cleaning or handling.
TROUBLESHOO TING GUIDE 18 Before requesting service, please refer to the chart below for possible solutions: SYMPT OMS POSSIBLE CA USE POSSIBLE SOLUTIONS No power . Power failure. Restore the power Line voltage too low. Contact electrician to install new outlet.
19 SPECIFIC A TIONS MODEL DSB-122L DSB-122LH Function Cooling Cooling / Heating (Heat pump) Power Supply AC 220-240V, 50Hz Cooling Capacity (Heating Mode) 3,024 Kcal/h 3,150 Kcal/h (3,402 Kcal/h) Operating Current (Heating Mode) 5.
An important point after buying a device Daewoo DSB-122L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DSB-122L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DSB-122L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DSB-122L you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DSB-122L will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DSB-122L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DSB-122L.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DSB-122L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DSB-122L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
