Instruction/ maintenance manual of the product DSB-071LH Daewoo
Go to page of 30
S1 MODEL #: DSB-07 1 LH O WNER'S MANU AL SPLIT AIRCONDITIONING SYSTEM.
This air conditioner meets strict safety and operating standards. The installer of this unit must install or service this unit so it operates safely and efficiently.
CONTENTS 2 It is recommended that you read the Installation and Operating instructions fully before installing and/or operating this unit. Safety Instructions ....................................................1 Contents .............................
This Installation section explains how and where to connect this new air conditioner. Please read make sure all acces- sories are included as shown below and read manual thoroughly.
OPTION AL A CCESSORIES 4 1 2 6 3 8 7 5 4 A CCESSORIES NOT SUPPLIED WITH THE UNIT: No. Description Part No. Qty Material Size 1 Drain Hose Extension 3103200200 1 PVC ID19.
Below is an overview for the connection of the the Indoor unit to the Outdoor unit. The pages following will give detailed instructions for full installation. Remember to read the complete Installation section and follow all the safety instructions fully when installing the Indoor and Outdoor units.
1. Determine the type of wall (sheetrock, concrete, etc.) and make sure it is strong enough to hold indoor unit. Select an approximate position for the unit, taking the required distances away from walls/AC outlet into consideration.
INST ALLA TION (CONTINUED) 7 NO TES: • This appliance must be installed according to National power supply requirement. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qual- ified person in order to avoid a hazard.
INST ALLA TION (CONTINUED) 8 4. Connect the wires to the housing and terminals on the control board individually according to the out- door unit connection. The used connection cable connected to indoor and out- door unit must be ; 1) H07RN-F 3G1.5mm 2 (NOT INCLUDED) 2) H07RN-F 2G1.
INST ALLA TION (CONTINUED) 9 CA UTION: • When using the tube reamer, hold the tube downward and make sure no copper scraps fall into the tubing. 2. Make a flare at the end of the copper tube with a flare tool. Make sure the inside surface and edges are smooth and the sides are uniform length.
INST ALLA TION (CONTINUED) 10 3. Once a smooth match is made, tighten the flare nut using a wrench. Be very careful not to strip the threads or flare nut. Repeat this process for the small and large tubing. When tightening the flare nut, use another wrench to securely hold the coupler from twisting and possibly damaging the tubing.
INST ALLA TION (CONTINUED) 11 1. Remove the screw holding on the connection cover. Remove the connection cover on the outdoor unit to access the connection area. 3. Connect the wires to the housing and terminals on the Control board individually according to the out- door unit Connection.
INST ALLA TION (CONTINUED) 12 1. Tape the two copper tubes, drain hose (and the electrical wiring if local codes permit) together with the supplied tape. Make sure the electrical wiring does not come in direct contact with the copper tubing or drain hose.
INST ALLA TION (CONTINUED) 13 AIR PURGING Air and moisture remaining in the refrigerant system may create adverse conditions as indicated below: • pressure in the system rises • operating current .
INST ALLA TION (CONTINUED) 14 Evacuation 1. Attach the charge hose end described in the leak test area to a vacuum pump to evacuate the tubing and indoor unit. Confirm the “Lo” knob of the manifold valve is open. Then, run the vacuum pump. The operation time for evac- uation varies with the tubing length and capacity of the pump.
INST ALLA TION (CONTINUED) 15 TEST R UN Check that all tubing and wiring have been completed correctly. Check again that the wide and narrow tube service valves are fully opened. Turn on the power and run the system. Service Valve Construction • Valve Position Closed The valve systems of both the wide and narrow tubes are turned all the way in.
16 LOC A TION OF CONTROLS OPERATING SECTION Electrostatic Filter (Option) Removes dust particles from the air. Air Cleaning Filters Removes dust and prohibits germs.
17 LOC A TION OF CONTROLS INDOOR UNIT ■ Remote Control Signal Receiver This place is the part to receive the signal if it receive the signal, you can hear the signal “beep. beep”. ■ There is a switch panel at inside of Front Panel. At the time of operating, open the Front Panel.
18 LOC A TION OF CONTROLS (CONTINUED) MODE SLEEP ON/OFF TIMER ENTER/ CANCEL FAN SPEED TURBO/MILD Display Display information TURBO/MILD Press to be colder the unit. TIMER ENTER/CANCEL Button Press to enter a timer setting or to cancel timer setting TIMER ON/OFF Button Press to set the unit of or on time.
19 OPERA TION 1. Insert the attached AC plug into a pronged 220V AC outlet. AC Outlet and Plug NO TES: • Never connect the AC line cord plug to other than the specified voltage (220V). • Use the attached power cord only. • The new air conditioner system should be on it’s own 220V circuit.
OPERA TION (CONTINUED) 20 CELSIUS T O F AHRENHEIT CONVERSION CHAR T CELSIUS FAHRENHEIT 18 64.4 19 66.2 20 68 21 69.8 22 71.6 23 73.4 24 75.2 25 77 CELSIUS FAHRENHEIT 26 78.
21 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the re- mote display. 2. Make sure the indicator appears in the remote display. Using the TEMP. ▼ or ▲ buttons, set the desired tempera- ture.
22 F AN SPEEDS “ ” The fan will operate on low speed. “ ” The fan will operate on medium speed. “ ” The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the speeds simulating a breeze. NO TE: • If “NATURAL” is selected, the NATURAL” indicator on the indoor unit will light.
23 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
24 1. Press the ON/OFF button of timer on the remote control to set the on timer mode, “HOUR” and “ON” on the remote display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired time. Then, if pressing “ENTER/CANCEL” button , ON TIMER Mode will be started.
25 T O CANCEL SLEEP MODE: To cancel sleep mode, press the SLEEP button again; the SLEEP indicator will disappear in the display. AUTO T O SET UNIT TO SLEEP MODE In the cooling operation; When you are .
26 CHANGING/CLEANING THE AIR FIL TERS To change or clean the two black air filters, follow the procedures below: 1. Open the indoor unit’s cover and remove both black air filters by bending them slightly backward and the lifting out. 2. Remove the two small filters (Deodorizing and Electrostatic) from the indoor unit.
C ARE AND MAINTEN ANCE 27 Clean the casing and front of the indoor unit with a vacuum brush or wipe with a clean damp cloth. • NEVER USE Solvents, harsh chemicals or hot water to clean the unit. • Some metal edges on the unit are sharp. Be careful when cleaning or handling.
TROUBLESHOO TING GUIDE 28 Before requesting service, please refer to the chart below for possible solutions: SYMPT OMS POSSIBLE CA USE POSSIBLE SOLUTIONS No power. Power failure. Restore the power Line voltage too low. Contact electrician to install new outlet.
SPECIFIC A TIONS 29 MODE L DSB-07 1 L H Function Cooling / Heating (Heat pump) Power Supply AC 220 - 240V, 50Hz Cooling Capacity (Heating ) 1,688 Kcal/h (1,764 Kcal/h ) Operating Current (Heating Mode ) 3.
An important point after buying a device Daewoo DSB-071LH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DSB-071LH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DSB-071LH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DSB-071LH you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DSB-071LH will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DSB-071LH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DSB-071LH.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DSB-071LH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DSB-071LH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
