Instruction/ maintenance manual of the product DPC - 7400P Daewoo
Go to page of 30
.
1 2 The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
4 3 Safety Information CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Please carefully study this manual and always keep it available. There are, however , some installation and operation precautions which you should be aware of.
6 5 attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
Introduction Y our new portable DVD player is designed for you to enjoy all forms of disc media. Its slim shape allows you to easily carry it with you and enjoy movies and music anywhere. Y our player incorporates the latest digital audio/video (A V) technologies to give you the ultimate in listening and viewing pleasure.
Safety Precautions/ Information..................................... 1-7 Introduction.................................................................... 8-9 T able of Contents............................................................. 10 Quick Starting Guide.
6. Press the PLA Y button on the player face (Depends on the DVD title, press the ENTER button) In general, the DVD already inserted into the player will start reading automatically when power is turned on. The DVD player will immediately start rendering the DVD program.
Connecting to a TV FOR GOOD RESUL TS SETTING UP YOUR PLA YER Step 1:connect the audio cables to AUDIO OUT of the DVD player .. Step 2:connect the yellow cable to the VIDEO on the side of your player . (For TVs that support S-V ideo Output please follow the diagram on page 15.
Connecting to Optional Equipment CONNECTING HEADPHONES 1. Connect the headphones. Headphones with a 3.5 mm stereo plug can be connected. 2. Adjust the volume by turning the dial. • Avoid listening to sound at levels which may be harmful to your ears.
Connecting to Optional Equipment • Adjust the volume of your receiver to a comfortable listening level to avoid any speaker damage. • When connecting and disconnecting the DVD video player , turn off the amplifier to avoid any speaker damage.
Playing Back a Disc Connecting to Optional Equipment Enjoy Dolby Digital (BETTER) Dolby Digital Dolby Digital gives BETTER audio than from Dolby Pro- Logic. Dolby Digital programming can deliver surround sound with five discrete full range channels plus a sixth channel for a subwoofer .
Y ou can playback a disc at 2x, 4x, 8x, 16x or 32x the normal speed for fast forward or rewind. Press the REV or FWD button during playback. The playback speed becomes double the normal speed. The playback speed changes, each time you press the REV or FWD button.
Playing Back Y our KODAK Picture CD When a Kodak Picture CD is loaded, an automated slide show is launched, Each picture in the current directory will be displayed consecutively in a slide-show fashion and will be scaled to fit most of the screen. To display an image indefinitely , press the P AUSE key .
JPEG Playback 3. Menu During the playback, press MENU to access thumbnail menu. For previewing JPEG files, press MENU again to return to JPEG folders. CREA TING YOUR OWN PICTURE CDS Using your computer save pictures as JPEG format and burn them on a CD-R disc, then you can watch on your DVD player .
LOCA TING A TITLE USING THE TITLE MENU Y ou can locate a specific title using the title menu function, if a DVD video disc contains a title menu. 1. Press the TITLE button On the LCD or TV screen, the title menu will appear . 2. Press the button to select the title you want.
REPEAT ANGLE ZOOM SLOW A-B PRGM AUDIO HOW TO REPEA T A SPECIFIC SEGMENT (Press SHIFT button.) 1. Press the A-B button at the beginning of the segment in which you want to repeat playback (point A) 2.
3. Highlight ST ART and press ENTER to start program playback. 4. T o clear the programmed, move the cursor to STOP and then press ENTER to confirm it. Playing in Favorite Order 1 TT : CH: 6 TT : CH: 2 TT : CH: 7 TT : CH: 3 TT : CH: 8 TT : CH: 4 TT : CH: 9 TT : CH: 5 TT : CH: 10 TT : CH: EXIT STOP NEXT 1.
Selecting Subtitles HOW TO DISPLA Y SUBTITLES Y ou have the option to select a preferred subtitle from those included on the DVD video disc. Press the SUBTITLE button during playback. 1/03 2/03 SUBTITLE 2 3/03 SUBTITLE 3 SUBTITLE OFF SUBTITLE 1 Press the SUBTITLE button during playback until the subtitles disappears.
If the DVD video disc was recorded with multiple angles, you have the option to change the camera angle of the scene you are watching. Press the ANGLE button while playing back a scene recorded with multiple angles (with SHIFT on). • Y ou may only press the ANGLE button when the angle icon is flashing on the DVD display .
4. Select Parental. 5. Select ratings, press ENTER 6. Enter your password then press ENTER. The pre-set password is 3308 7. Press SETUP to exit setup, press ENTER to start. Setting the Parental Lock TO CHANGE YOUR P ASSWORD: 1. See page 50 and select password change.
CHARGING THE BA TTER Y P ACK The battery pack can be charged in two ways:: 1. Charge the battery directly . 2. Charge the battery while it is connected to the DVD player . 1. To charge the battery pack directly , connect the AC/DC adapter to the DC IN jack on the left side of the battery pack.
Battery Storage 1.Storage T emperature and Humidity (Short-term) In a dry location with low humidity(Max.85%), no corrosive gases, at a temperature range of -20 ºC to 45ºC.
• Normal/LB • Wide Select the most appropriate aspect ratio for the DVD being viewed. 1. Normal/PS Normal Pan and Scan is used for most normal television broadcasts. It has an aspect ratio of 4:3. If you select this setting when viewing a DVD the picture will fill the screen but, you will not see the left and right edges of the picture.
PCM PCM (Pulse Code Modulation) is an uncompressed digital format that ensures a very high quality , but it does not support the surround sound effect. When selected, the audio contained on the disc is passed directly to the amplifier through the digital coaxial output.
Dolby Digital Setup The Dolby Digital options allow you to choose the way the stereo signal is mixed. Dual Mono The audio out description of these selections is shown in the table below .
Change Reset 1 Kid Safe 2 G 3 PG 4 PG-13 5 PG-R 6 R 7 NC-17 8 Adult Preferences Page Press STOP twice while playback TV T ype The TV type menu enables you to select a proper DVD record type according to your DVD disc. The default is P AL. Audio The audio menu enables you to select the language used for the audio output.
Password This menu enables you to change the four digit password that is used to set the parental control. Navigate to highlight the change option and press the ENTER button. The password change menu will be displayed with the first field selected. Enter the existing (old) password.
T rouble Shooting Guide Specifications DVD VIDEO PLA YER/OUTPUTS AC Adapter Power supply 100-240V AC 50/60Hz Power consumption 9W Wei ght 2 .0 kg External dimensions 200x 38 x 155mm (W/H/D) Signal system NTSC/P AL/AUTO Laser Semiconductor laser , wavelength 650 nm DVD VIDEO PLA YER OUTPUTS V ideo output 1.
T rouble Shooting Guide Distorted picture. *Check the disc for fingerprints and clean it with a soft cloth, wiping it from center to edge. *Sometimes a small amount of picture distortion may appear . This is not a malfunction. Completely distorted picture or no color in picture.
Anglee cannot change. *This function depends on software availabiliity . Even if a disc has a number of angles recorded, these angles may be recorded for specific scenes only . The icon( ) appears on screen. *The feature or action cannot be completed at this time beccause: 1.
An important point after buying a device Daewoo DPC - 7400P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DPC - 7400P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DPC - 7400P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DPC - 7400P you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DPC - 7400P will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DPC - 7400P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DPC - 7400P.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DPC - 7400P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DPC - 7400P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
